DOI QR코드

DOI QR Code

Tailoring ECC for Special Attributes: A Review

  • Li, Victor C. (Department of Civil and Environmental Engineering, University of Michigan)
  • Received : 2012.07.09
  • Accepted : 2012.08.03
  • Published : 2012.09.30

Abstract

This article reviews the tailoring of engineered cementitious composites (ECC), a type of high performance fiber reinforced cementitious composites with a theoretical design basis, for special attributes or functions. The design basis, a set of analytic tools built on micromechanics, provides guidelines for tailoring of fiber, matrix, and fiber/matrix interfaces to attain tensile ductility in ECC. If conditions for controlled multiple cracking are disturbed by the need to introduce ingredients to attain a special attribute or function, micromechanics then serve as a systematic and rational means to efficiently recover composite tensile ductility. Three examples of ECCs with attributes of lightweight, high early strength, and self-healing functions, are used to illustrate these tailoring concepts. The fundamental approach, however, is broadly applicable to a wide variety of ECCs designed for targeted fresh and/or hardened characteristics required for specific applications.

Keywords

Acknowledgement

Supported by : US National Science Foundation

Cited by

  1. On the use of recycled tire rubber to develop low E-modulus ECC for durable concrete repairs vol.46, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2013.04.027
  2. Enhancement of flexural behaviour of CFRP-strengthened reinforced concrete beams using engineered cementitious composites transition layer vol.11, pp.8, 2012, https://doi.org/10.1080/15732479.2014.930497
  3. Mechanical Properties of Porous β-Tricalcium Phosphate Composites Prepared by Ice-Templating and Poly(ε-caprolactone) Impregnation vol.7, pp.1, 2015, https://doi.org/10.1021/am507333q
  4. Investigation on Properties of ECC Incorporating Crumb Rubber of Different Sizes vol.13, pp.5, 2012, https://doi.org/10.3151/jact.13.241
  5. 섬유 조합에 따른 초고성능 콘크리트의 인장거동 vol.19, pp.4, 2012, https://doi.org/10.11112/jksmi.2015.19.4.049
  6. Creep Mechanisms of Calcium-Silicate-Hydrate: An Overview of Recent Advances and Challenges vol.9, pp.4, 2015, https://doi.org/10.1007/s40069-015-0114-7
  7. Mode II Fracture Toughness of Hybrid FRCs vol.9, pp.4, 2012, https://doi.org/10.1007/s40069-015-0117-4
  8. Influence of Cyclic Frost Deterioration on Water Sorptivity of Microcracked Cementitious Composites vol.28, pp.4, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0001408
  9. High-Performance Grouting Materials in Shear Keys Between Box Beams vol.2577, pp.1, 2012, https://doi.org/10.3141/2577-05
  10. Improved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials vol.9, pp.1, 2012, https://doi.org/10.3390/ma9010042
  11. Innovative ECC jacketing for retrofitting shear-deficient RC members vol.111, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2016.02.077
  12. Multiple cracking analysis of HTPP-ECC by digital image correlation method vol.17, pp.6, 2012, https://doi.org/10.12989/cac.2016.17.6.831
  13. Structural performance of reinforced strain hardening cementitious composite pipes during monotonic loading vol.114, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2016.03.185
  14. Strain Rate Dependent Behavior and Modeling for Compression Response of Hybrid Fiber Reinforced Concrete vol.13, pp.9, 2012, https://doi.org/10.1590/1679-78252717
  15. Control of Tensile Behavior of Ultra-High Performance Concrete Through Artificial Flaws and Fiber Hybridization vol.10, pp.3, 2012, https://doi.org/10.1007/s40069-016-0155-6
  16. Self-healing capacity of fiber reinforced cementitious composites. State of the art and perspectives vol.21, pp.7, 2012, https://doi.org/10.1007/s12205-017-0939-5
  17. Strength Improvement of Strain-Hardening Cementitious Composites with Ultrahigh-Volume Fly Ash vol.29, pp.9, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0001987
  18. Tensile Behavior and Cracking Pattern of an Ultra-High Performance Mortar Reinforced by Polyethylene Fiber vol.2017, pp.None, 2017, https://doi.org/10.1155/2017/5383982
  19. Strength Correlation and Prediction of Engineered Cementitious Composites with Microwave Properties vol.7, pp.1, 2012, https://doi.org/10.3390/app7010035
  20. Corrosion Deterioration of Steel in Cracked SHCC vol.11, pp.3, 2012, https://doi.org/10.1007/s40069-017-0205-8
  21. Microwave Non-Destructive Inspection and Prediction of Modulus of Rupture and Modulus of Elasticity of Engineered Cementitious Composites (ECCs) Using Dual-Frequency Correlation vol.17, pp.12, 2012, https://doi.org/10.3390/s17122831
  22. Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites vol.24, pp.4, 2012, https://doi.org/10.15407/fm24.04.584
  23. Theoretical and Experimental Study of Effective Shear Stiffness of Reinforced ECC Columns vol.11, pp.4, 2017, https://doi.org/10.1007/s40069-017-0219-2
  24. Properties of Self-Consolidating Engineered Cementitious Composite Modified with Rubber vol.30, pp.4, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0002219
  25. Effects of Variable Humidity on the Creep Behavior of Concrete and the Long-Term Deflection of RC Beams vol.2018, pp.None, 2018, https://doi.org/10.1155/2018/8301971
  26. Tensile properties of strain-hardening cementitious composites containing polyvinyl-alcohol fibers hybridized with polypropylene fibers vol.25, pp.1, 2012, https://doi.org/10.1007/s11771-018-3716-9
  27. Strain Behavior of Concrete Panels Subjected to Different Nose Shapes of Projectile Impact vol.11, pp.3, 2018, https://doi.org/10.3390/ma11030409
  28. Tensile strain-hardening behaviors and crack patterns of slag-based fiber-reinforced composites vol.21, pp.3, 2018, https://doi.org/10.12989/cac.2018.21.3.231
  29. Characterization of the abrasion resistance and the acoustic wave attenuation of the engineered cementitious composites for runway pavement vol.174, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2018.04.152
  30. Mechanical Properties of Hybrid Ultra-High Performance Engineered Cementitous Composites Incorporating Steel and Polyethylene Fibers vol.11, pp.8, 2012, https://doi.org/10.3390/ma11081448
  31. Effect of fiber type on the behavior of cementitious composite beam-column joints under reversed cyclic loading vol.186, pp.None, 2012, https://doi.org/10.1016/j.conbuildmat.2018.08.024
  32. Cost-Effective ECC with Low Fiber Content for Pavement Application vol.271, pp.None, 2012, https://doi.org/10.1051/matecconf/201927107001
  33. Experimental Study on the Impact Fatigue Behavior of GFRP Mesh Reinforced ECC for Runway Pavement Application vol.275, pp.None, 2019, https://doi.org/10.1051/matecconf/201927501010
  34. ECC Design Based on Uniform Design Test Method and Alternating Conditional Expectation vol.2019, pp.None, 2012, https://doi.org/10.1155/2019/9575897
  35. Hybrid effects of steel fibers, basalt fibers and calcium sulfate on mechanical performance of PVA-ECC containing high-volume fly ash vol.97, pp.None, 2019, https://doi.org/10.1016/j.cemconcomp.2019.01.009
  36. Performance of Self-Consolidating Engineered Cementitious Composite under Drop-Weight Impact Loading vol.31, pp.3, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0002619
  37. Development and Mechanical Performance of Fire-Resistive Engineered Cementitious Composites vol.31, pp.5, 2019, https://doi.org/10.1061/(asce)mt.1943-5533.0002666
  38. Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content vol.2673, pp.5, 2012, https://doi.org/10.1177/0361198119837510
  39. Assessment of Crack Development in Engineered Cementitious Composites Based on Analysis of Acoustic Emissions vol.31, pp.6, 2019, https://doi.org/10.1061/(asce)mt.1943-5533.0002690
  40. Investigation on the Failure Behavior of Engineered Cementitious Composites under Freeze-Thaw Cycles vol.12, pp.11, 2019, https://doi.org/10.3390/ma12111808
  41. Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers vol.8, pp.2, 2012, https://doi.org/10.12989/amr.2019.8.2.137
  42. Autogenous Self-Healing: A Better Solution for Concrete vol.31, pp.9, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0002764
  43. Tension and Cyclic Behavior of High-Performance Fiber-Reinforced Cementitious Composites vol.31, pp.10, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0002844
  44. Effect of Rubber Aggregate and Binary Mineral Admixtures on Long-Term Properties of Structural Engineered Cementitious Composites vol.31, pp.11, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0002894
  45. Retrofitting of Defected Closure Strips for Full-Depth Precast Concrete Deck Slabs Using EB-CFRP Sheets vol.24, pp.4, 2019, https://doi.org/10.1061/(asce)sc.1943-5576.0000449
  46. Strain-Hardening and High-Ductile Behavior of Alkali-Activated Slag-Based Composites with Added Zirconia Silica Fume vol.12, pp.21, 2012, https://doi.org/10.3390/ma12213523
  47. Smart Self-Healing and Self-Sensing Cementitious Composites-Recent Developments, Challenges, and Prospects vol.8, pp.3, 2012, https://doi.org/10.1520/acem20190023
  48. Role of Sugarcane Bagasse Ash in Developing Sustainable Engineered Cementitious Composites vol.7, pp.None, 2012, https://doi.org/10.3389/fmats.2020.00065
  49. Fatigue Fracture Investigation of Engineered Cementitious Composites vol.49, pp.5, 2012, https://doi.org/10.1520/jte20190877
  50. Constitutive relationships for CNF‐reinforced engineered cementitious composites and CNF‐reinforced lightweight engineered cementitious composites at ambient and elevated temperatures vol.21, pp.2, 2012, https://doi.org/10.1002/suco.201900268
  51. Investigation of Fibers Reinforced Engineered Cementitious Composites Properties Using Quartz Powder vol.13, pp.11, 2012, https://doi.org/10.3390/ma13112428
  52. Moment-Curvature Behavior of PP-ECC Bridge Piers under Reversed Cyclic Lateral Loading: An Experimental Study vol.10, pp.12, 2012, https://doi.org/10.3390/app10124056
  53. Mechanical and Fiber-Bridging Behavior of Slag-Based Composite with High Tensile Ductility vol.10, pp.12, 2012, https://doi.org/10.3390/app10124300
  54. Retrofitting of defected reinforced-concrete cantilever slabs using different techniques vol.72, pp.14, 2012, https://doi.org/10.1680/jmacr.18.00340
  55. Acid and Sulphate Attacks on a Rubberized Engineered Cementitious Composite Containing Graphene Oxide vol.13, pp.14, 2020, https://doi.org/10.3390/ma13143125
  56. Performance of engineered cementitious composite covered or wrapped self-consolidating concrete beams under corrosion vol.219, pp.None, 2012, https://doi.org/10.1016/j.engstruct.2020.110801
  57. Fibre Distribution Characterization of Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC) Plates Using Magnetic Probes vol.13, pp.22, 2020, https://doi.org/10.3390/ma13225064
  58. Durability Evaluation of Green-Engineered Cementitious Composite Incorporating Glass as Aggregate vol.32, pp.12, 2020, https://doi.org/10.1061/(asce)mt.1943-5533.0003444
  59. Flexural Performance of Steel Reinforced ECC-Concrete Composite Beams Subjected to Freeze-Thaw Cycles vol.14, pp.1, 2012, https://doi.org/10.1186/s40069-019-0385-5
  60. Simplified Constitutive and Damage Plasticity Models for UHPFRC with Different Types of Fiber vol.14, pp.1, 2020, https://doi.org/10.1186/s40069-020-00418-9
  61. Fracture Models and Effect of Fibers on Fracture Properties of Cementitious Composites—A Review vol.13, pp.23, 2012, https://doi.org/10.3390/ma13235495
  62. Evaluation of the Durability Properties of Engineered Cementitious Composites Incorporating Recycled Concrete as Aggregate vol.33, pp.2, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0003563
  63. Development of Engineered Cementitious Composites Using Sea Sand and Metakaolin vol.8, pp.None, 2021, https://doi.org/10.3389/fmats.2021.711872
  64. Performance Test and Microstructure of Modified PVC Aggregate-Hybrid Fiber Reinforced Engineering Cementitious Composite (ECC) vol.14, pp.8, 2021, https://doi.org/10.3390/ma14081856
  65. Fracture of fibre-reinforced cementitious composites after exposure to elevated temperatures vol.73, pp.14, 2012, https://doi.org/10.1680/jmacr.19.00401
  66. Strengthening of defected closure strips for full-depth RC deck slabs using CFRP sheets vol.174, pp.7, 2021, https://doi.org/10.1680/jstbu.18.00226
  67. Temperature Impact on Engineered Cementitious Composite Containing Basalt Fibers vol.11, pp.15, 2012, https://doi.org/10.3390/app11156848
  68. Properties of Engineered Cementitious Composites with Raw Sugarcane Bagasse Ash Used as Sand Replacement vol.33, pp.9, 2012, https://doi.org/10.1061/(asce)mt.1943-5533.0003892
  69. Influences of Sodium Lignosulfonate and High-Volume Fly Ash on Setting Time and Hardened State Properties of Engineered Cementitious Composites vol.14, pp.17, 2012, https://doi.org/10.3390/ma14174779
  70. Investigation of using limestone calcined clay cement (LC3) in engineered cementitious composites: The effect of propylene fibers and the curing system vol.15, pp.None, 2012, https://doi.org/10.1016/j.jmrt.2021.09.023
  71. Experimental Investigation on Dynamic Tensile Behaviors of Engineered Cementitious Composites Reinforced with Steel Grid and Fibers vol.14, pp.22, 2021, https://doi.org/10.3390/ma14227042
  72. Development of eco-friendly engineered cementitious composites using glass aggregates: Shrinkage properties vol.5, pp.None, 2012, https://doi.org/10.1016/j.clet.2021.100299
  73. In-plane behavior of URM wall with openings strengthened with ECC subjected to cyclic load vol.34, pp.None, 2021, https://doi.org/10.1016/j.istruc.2021.09.037
  74. High-performance strain-hardening cementitious composites with tensile strain capacity exceeding 4%: A review vol.125, pp.None, 2012, https://doi.org/10.1016/j.cemconcomp.2021.104325
  75. Mechanical properties of high ductile alkali-activated fiber reinforced composites incorporating red mud under different curing conditions vol.48, pp.2, 2012, https://doi.org/10.1016/j.ceramint.2021.09.285
  76. Selection of proper matrix with plasma-treated HTPP fiber reinforced cementitious composites in terms of flexural toughness vol.45, pp.None, 2012, https://doi.org/10.1016/j.jobe.2021.103632