DOI QR코드

DOI QR Code

The Study of analysis and test for crash survival about the Crash Protected Module in Black Box used at aircraft

항공기용 블랙박스의 자료보호모듈 극한환경해석 및 시험에 관한 연구

  • Received : 2011.11.21
  • Accepted : 2011.12.23
  • Published : 2012.01.01

Abstract

The purpose of Crash Protected Module in Black Box used at aircraft is to protect a stored information(Flight data & Cockpit Voice) safely even after extreme environment like a plane crash. This study shows the structure & thermal analyses and the comparisons of predictions and results of tests about CPM for Crash Survival through extreme environment such as Penetration Resistance, High Temperature Fire, Low Temperature Fire. Specially, the Effect of housing thickness change was studied through the Penetration Resistance analysis using LS-DYNA, and the influence of volume ratio change between phase change material and thermal insulation material was studied through the High Temperature & Low Temperature analysis using Icepak. Also, structural and thermal reliability of CPM was validated through the tests.

항공기용 블랙박스의 자료보호모듈(CPM)은 항공사고와 같은 극한 환경후에도 저장된 정보(비행데이터 및 조종석음성)를 안전하게 보호하는 것을 목적으로 한다. 본 연구에서는 CPM에 대하여 관통저항력과 고온 및 저온내화의 극한환경시험에 대한 구조 및 방열측면의 해석 및 시험을 통한 검증에 대하여 기술하였다. 특히 관통저항력해석에서는 하우징의 두께에 따른 영향성을 LS-DYNA를 이용하여 검토하였으며, 고온 및 저온내화해석에서는 상변화물질과 단열재의 체적비에 따른 영향성을 Icepak을 이용하여 수행하였다. 또한 실험을 통하여 CPM의 구조 및 열적 신뢰성을 검증하였다.

Keywords

References

  1. ED-112, Minimum Operational Performance Specification for Crach Protected Airborne Recorder Systems, March 2003
  2. 이석규, "소형항공기용 블랙박스의 극한충격해석 및 실험", 한국항공우주학회 춘계학술대회 논문집, pp. 176-180, 2006.
  3. 이석규, "소형항공기용 블랙박스의 관통저항력 해석 및 실험", 한국항공우주학회 추계학술발표회 논문집, pp. 463-366, 2005
  4. 박석환, "상변화를 수반하는 항공용 블랙박스의 열특성에 관한 연구", 대한기계학회 추계학술대회 논문집, pp. 2659-2664, 2010.
  5. LS-DYNA KEYWORD USER'S MANUAL, April 2003, Version 970, Livermore Software Technology Corporation
  6. Gauche Paul and Shidore Sarang, "Thermal performance comparison of a microprocessor using phase change materials in various configurations", vol. 4339, pp. 375-380, 2000.
  7. Donald R. Lesuer, Experimental Investigations of Material Models for Ti-6Al-4V Titanium and 2024-T3 Aluminum, DOT/FAA/AR-00/25, Final Report, Federal Aviation Administration, 2000.