DOI QR코드

DOI QR Code

Body Floor의 복합재 접합방식 및 경량화 설계에 관한 연구

A Study on the Structural Design of Effective Composite Joint and Light Weight in Body Floor

  • 투고 : 2012.08.10
  • 심사 : 2012.11.13
  • 발행 : 2012.12.15

초록

A study of vehicle weight lightening has been progressed to reduce the fuel consumption. In this paper, the body floor in an EV (Electric Vehicle) bus has been applied by composites as CFRP and GFRP. In order to analyse a various reliability and safety, an experiment and FEM analysis was carried out to obtain weight lightening. Especially, the joint. An effective design is obtained through an experiment as well as FEM analysis. Results of stress analysis of GFRP material showed twice as much displacement than those of CFRP material. Among three kinds of joint methods, the bond joint method is occurred to a substantial shape change in the body and floor. It is found that the rivet joints are fairly suitable for stress sustaining capability.

키워드

참고문헌

  1. Yang, I. Y., Lee, K. S., and Cho, Y. J., 2004, "The Journal of The Institute Research of Mechanical Technology," The Journal of The Institute Research of Mechanical Technology, Vol. 7, No. 5, pp. 1-13.
  2. Ghoo, B. Y., 2004, "Development of Non-isothermal Forming Technology of Aluminum-alloy Sheet Panel for Light Weight Autobody," Spring Conference of Korea Society of Automotive Engineers, pp. 1323-1328.
  3. Park, D. O., Seo, C. H., and Ji, S. W., 2006, "The Experimental Study on Improvement the Pump Sending of the Light Weight Concrete using the Light Weight Aggregate" The Korea Institute of Building Construction, Vol. 6, No. 1, pp. 23-26.
  4. Hwang, W. C., Sim, J. K., and Yang, I. Y., 2011, "A Study on the Collapse Characteristics of Al/CFRP Square Structural Member for Light Weight," KSMTE, Vol. 20 No. 3, pp. 219-224.
  5. Yang, I. Y., Im, K. H., Choi, J. H., 2012, "Energy Absorption Characteristics of CFRP Lightweight Structural Members," KSMTE Spring Conference, pp. 308-308.
  6. Seo, M. K., Park, S. H., An, K. H., Kang, S. J., and Park, S. J., 2010, "Technology Trends and the Domestic Industry Status in Carbon," The Korea Society for Composite Materials, Vol. 23, No. 5, pp. 39-52. https://doi.org/10.7234/kscm.2010.23.6.039
  7. Kim, H. G., Kwac, L. K., Oh, S. Y., Seo, M. K. Choi, W. K., Kim, G. C., and Kim, H. W., 2012 "A Study on the Structural Analysis in EV Bus Body Floor Mounting," Proceedings of the KSME 2012 Spring Annual Meeting, pp. 15-16.
  8. Lee, S. S., Hwang, Y. J., and Kim, H. J., 2005., CATIA V5 Releas 14, Cyeongsang National University Press
  9. TaeSung SNE, 2010, ANSYS Workbench, ANSYS Inc.
  10. Park, D. Y., Lee, S. Y., and Chang, S. Y., 2011, "Strength Analysis of Joint Between Steel Plate and CFRP Laminated Splice Plates Patched by Adhesive," J. Korean Soc. Adv. Comp. Struc., Vol. 2, No. 2, pp. 13-19. https://doi.org/10.11004/kosacs.2011.2.2.013
  11. Park, D. Y., and Chang, S. Y., 2010, "Elastic Buckling Analysis of Laminated Composite Plates with Embedded Square Delamination Using an Enhanced Assumed Strain Solid Element," J. Korean Soc. Adv. Comp. Struc., Vol. 1, No. 2, pp. 1-13.
  12. Baek, M. I., and Cho, K. Z., 1995, "The Study for Mass Reduction of Dump Box on Dump Truck," Trans. of the KSME, Vol. 2, No. 1, pp. 298-302.

피인용 문헌

  1. Analysis on Life Prediction for Different Materials in Vehicle Door Hinge Lightweight Design vol.22, pp.4, 2013, https://doi.org/10.7735/ksmte.2013.22.4.693