Journal of Power Electronics

  • 제12권1호
  • /
  • Pages.136-144
  • /
  • 2012
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Simulation Study of a New Approach for Field Weakening Control of PMSM

  • 투고 : 2011.06.28
  • 심사 : 2011.12.01
  • 발행 : 2012.01.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the different techniques for the field weakening, also known as constant power speed range (CPSR) operation, for permanent magnet synchronous motor (PMSM) will be introduced and analysed. Field weakening of PMSM, can be done using either vector control (VC) or conventional phase in advance (CPA). Implementation of these techniques depending on some features and constrains. Most of these features and constrains came from the motor parameters. One of these constrains is the motor inductance which determining whether the motor can be driven in the CPSR or not. A new approach for the field weakening will be discussed and to be verified to overcome this constrain. The new approach will be verified through both techniques VC and CPA.

키워드

참고문헌

  1. P. Pillay and R. Krishnan, "Application characteristics of permanent magnet synchronous and brushless DC motors for servo drives," IEEE Trans. Ind. Appl.,, Vol. 27, No. 5, pp. 986-996, Sep./Oct. 1991. https://doi.org/10.1109/28.90357
  2. M. Stulrajter, V. Hrabovcova, and M. Franko, "Permanent magnets synchronous motor control theory," Journal of ELECTRICAL ENGINEERING, Vol. 58, No. 2, 79-84, 2007,
  3. M. Kaewjindam W Konghirun, "A dsp - based vector control of pmsm servo drive using resolver sensor," TENCON 2006, pp. 1-4, 2006.
  4. K.-L. Kang, J.-M. Kim, K.-B. Hwang, and K.-H. Kim, "Sensorless control of PMSM in high speed range with iterative sliding mode observer," Applied Power Electronics Conference and Exposition, APEC '04., Vol. 2, pp. 1111-1116, 2004.
  5. R. Dutta, "A segmented interior permanent magnet synchronous machine with wide field-weakening range," PhD thesis, The University of New South Wales, Aug. 2007.
  6. O. Mohammed "Sensorless control of brushless dc motor", PhD thesis, Place Nameplace Cairo Place Type University, Sep. 2004.
  7. B. K. Bose, Modern power electronics and ac drives, Prentice Hall, 2002.
  8. M. A. Rahman and P. Zhou, "Analysis of brushless permanent magnet synchronous motors," IEEE Trans. Ind. Electron., Vol. 43, No. 2, pp. 256-267, Apr. 1996. https://doi.org/10.1109/41.491349
  9. M. A. Hoque, C. Butt and M. A. Rahman, "A novel approach for mtpa speed control of ipmsm drive," Second International Conference on Electrical and Computer Engineering ICECE 2002, 2002.
  10. M. Meyer and J. Boecker, "Optimum control for interior permanent magnet synchronous motors (ipmsm) in constant torque and flux weakening range," 12th International Power Electronics and Motion Control Conference, pp. 252-286, 2006.
  11. J. O. P. Pinto, "Analysis of extended constant power speed range of the permanent magnet synchronous machine driven by dual mode inverter control", PhD thesis, The University of Tennessee, Cityplace Knoxville, August, 2001.
  12. N. A. Patil, "Field weakening operation of ac machines for traction drive applications", PhD thesis, The University of Tennessee, Cityplace- Knoxville, August, 2009.
  13. J. S. Lawler, "Application of dual-mode inverter control to commercially available radial-gap permanent magnet motors - vol. i," final report for CRADA number ORNL 04-0691, May, 2006.
  14. J. S. Lawler, "Control of surface mounted permanent magnet motors with special application to fractional-slot motors with concentrated windings", ORNL/TM-2007/007, July, 2007.
  15. A. M. E.-R. Donald, placeW. Novotny , and T. M. Jahns, "A simple model for flux weakening in surface pm synchronous machines using back-to-back thyristors," IEEE power electronics letters, Vol. 2, No. 2, Jun. 2004.
  16. J. S. Lawler, J. M. Bailey, J. W. McKeever, and J. Pinto, "Extending the constant power speed range of the brushless dc motor through dualmode inverter control," IEEE Trans. Power Electron., Vol. 19, No. 3, pp. 783-793, May 2004. https://doi.org/10.1109/TPEL.2004.826511
  17. J. S. Lawler, J. Milton Bailey, John W. McKeever, and Joao Pinto, "Minimum Current Magnitude Control of Surface PM Synchronous Machines During Constant Power Operation," IEEE power electronics letters, Vol. 3, No. 2, pp. 53-56, Jun. 2005. https://doi.org/10.1109/LPEL.2005.848327
  18. H. Liu, Z. Q. Zhu, E. Mohamed, Y. Fu, and X. Qi "Flux-weakening Control of Non-Salient Pole PMSM Having Large Winding Inductance, counting for Resistive Voltage Drop and Inverter Nonlinearities," IEEE Trans. Power Electron., Vol. PP, No. 99, page. 1, Jun. 2011.
  19. Y. Zhang, L. Xu, M. K. Guven, S. Chi, and M. Illindala, "Experimental verification of deep field weakening operation of a 50-kW IPM machine by using single current regulator," IEEE Trans. Ind. Appl., Vol. 47, No. 1, pp. 128-133, Jan./Feb. 2011. https://doi.org/10.1109/TIA.2010.2091478

피인용 문헌

  1. A Double Bi-Quad Filter with Wide-Band Resonance Suppression for Servo Systems vol.15, pp.5, 2015, https://doi.org/10.6113/JPE.2015.15.5.1409
  2. Applicability of Fractional Slot Axial Flux Permanent Magnet Synchronous Machines in the Field Weakening Region vol.32, pp.1, 2017, https://doi.org/10.1109/TEC.2016.2614011