참고문헌
- J.-G. Cho, C.-Y. Jeong, H.-S. Lee, and G.-H. Rim, "Novel zero-voltagetransition current-fed full-bridge pwm converter for single-stage power factor correction," IEEE Trans. Power Electron., Vol. 13, No. 6, pp. 1005-1012, Nov. 1998. https://doi.org/10.1109/63.728327
- J. Zhang, M. M. Jovanovic, and F. C. Lee, "Comparison between CCM single-stage and two-stage boost PFC converters," in Proc. APEC, Vol. 1, pp. 335-341, 1999.
- B. Sharifipour, J. S. Huang, P. Liao, L. Huber, and M. M. Jovanovic, "Manufacturing and cost analysis of power-factor-correction circuits," in Proc. APEC, Vol. 1, pp. 490-494, 1998.
- E. Pepa, "Adaptive control of a step-up full-bridge dc-dc converter for variable low input voltage applications," Masters Thesis, Virginia Polytechnic Institute and State University, 2004.
- N. H. Kutkut, D. M. Divan, and R. W. Gascoigne, "An improved fullbridge zero-voltage switching PWM converter using a two-inductor rectifier," IEEE Trans. Ind. Appl., Vol. 31, No. 1, pp. 119-126, Jan./Feb. 1995. https://doi.org/10.1109/28.363041
- N. H. Kutkut, "A full bridge soft switched telecom power supply with a current doubler rectifier," in Proc. INTELEC, pp. 344-351, 1997.
- B.-Y. Chen, and Y.-S. Lai, "Switching control technique of phase-shiftcontrolled full-bridge converter to improve efficiency under light-load and standby conditions without additional auxiliary components," IEEE Trans. Power Electron., Vol. 25, No. 4, pp. 1001-1012, Apr. 2010. https://doi.org/10.1109/TPEL.2009.2033069
- V. Vlatkovic, J. A. Sabate, R. B. Ridley, F. C. Lee, and B. H. Cho, "Small-signal analysis of the phase-shifted PWM converter," IEEE Trans. Power Electron., Vol. 7, No. 1, pp. 128-135, Jan. 1992. https://doi.org/10.1109/63.124585
- N. H. Kutkut and G. Luckjiff, "Current mode control of a full bridge DC-to-DC converter with a two inductor rectifier," in Proc. PESC, Vol. 1, pp. 203-209, 1997.
- L. Cao, "Small signal modeling for phase-shifted pwm converters with a current doubler rectifier," in Proc. PESC, pp. 423-429, 2007.
- A. Jossen, "Fundamentals of battery dynamics," J. Power Sources, Vol. 154, No. 2, pp. 530-538, Mar. 2006. https://doi.org/10.1016/j.jpowsour.2005.10.041
- B. Hariprakasha, S. K. Marthaa, A. Jaikumara, and A. K. Shukla, "Online monitoring of lead-acid batteries by galvanostatic non-destructive technique," J. Power Sources, Vol. 137, No. 1, pp. 128-133, Oct. 2004. https://doi.org/10.1016/j.jpowsour.2004.05.045
- X. Huang, X. Wang, T. Nergaard, J.-S. Lai, X. Xu, and L. Zhu, "Parasitic ringing and design issues of digitally controlled high power interleaved boost converters," IEEE Trans. Power Electron., Vol. 19, No. 5, pp. 1341-1352, Sep. 2004. https://doi.org/10.1109/TPEL.2004.833434
- R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd ed., Kluwer Academic, 2001.
피인용 문헌
- A Novel Soft-Switching Battery Charge/Discharge Converter with Zero Voltage Discharge Function 2016, https://doi.org/10.1109/TPEL.2015.2482758
- An Inherent Zero-Voltage and Zero-Current-Switching Full-Bridge Converter with No Additional Auxiliary Circuits vol.15, pp.3, 2015, https://doi.org/10.6113/JPE.2015.15.3.610
- Non-isolated Boost Charger for the Li-Ion Batteries Suitable for Fuel Cell Powered Laptop Computers vol.13, pp.1, 2013, https://doi.org/10.6113/JPE.2013.13.1.31
- The Impact of Parasitic Elements on Spurious Turn-On in Phase-Shifted Full-Bridge Converters vol.16, pp.3, 2016, https://doi.org/10.6113/JPE.2016.16.3.883
- Controller Design for a Quick Charger System Suitable for Electric Vehicles vol.8, pp.5, 2013, https://doi.org/10.5370/JEET.2013.8.5.1122
- Modelling of lithium-titanate battery with ambient temperature effect for charger design vol.9, pp.6, 2016, https://doi.org/10.1049/iet-pel.2015.0639
- Design and Implementation of a High-Efficiency Multiple Output Charger Based on the Time-Division Multiple Control Technique vol.32, pp.2, 2017, https://doi.org/10.1109/TPEL.2016.2551723
- Half-Bridge Integrated ZVS Full-Bridge Converter With Reduced Conduction Loss for Electric Vehicle Battery Chargers vol.61, pp.8, 2014, https://doi.org/10.1109/TIE.2013.2282608
- Development of the Integrated Power Converter for the Environmentally Friendly Vehicle and Validation of the LDC using Battery HILS vol.63, pp.9, 2014, https://doi.org/10.5370/KIEE.2014.63.9.1212
- Design of a Nonisolated Fuel Cell Boost Charger for Lithium Polymer Batteries With a Low Output Ripple vol.30, pp.2, 2015, https://doi.org/10.1109/TEC.2014.2363088
- Design and Test of ESS DC-DC Converter using Zinc-Bromine Redox Flow Battery for Stand-alone Microgrid vol.19, pp.2, 2014, https://doi.org/10.6113/TKPE.2014.19.2.106
- The Design of Interleaved Bi-directional DC-DC Converter for Fuel Cell and Battery Hybrid System vol.18, pp.1, 2013, https://doi.org/10.6113/TKPE.2013.18.1.45
- 6.6-kW Onboard Charger Design Using DCM PFC Converter With Harmonic Modulation Technique and Two-Stage DC/DC Converter vol.61, pp.3, 2014, https://doi.org/10.1109/TIE.2013.2262749
- Zero-current switching series loaded resonant converter insensitive to resonant component tolerance for battery charger vol.7, pp.10, 2014, https://doi.org/10.1049/iet-pel.2013.0757
- Hybrid PWM-Resonant Converter for Electric Vehicle On-Board Battery Chargers vol.31, pp.5, 2016, https://doi.org/10.1109/TPEL.2015.2456635
- Novel Time Division Multiple Control Method for Multiple Output Battery Charger vol.29, pp.10, 2014, https://doi.org/10.1109/TPEL.2014.2312422
- The Steady-State DC Gain Loss Model, Efficiency Model, and the Design Guidelines for High-Power, High-Gain, Low-Input Voltage DC–DC Converter vol.54, pp.2, 2018, https://doi.org/10.1109/TIA.2017.2779099