한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제22권1호
  • /
  • Pages.3-8
  • /
  • 2012
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

이종재료 접합을 위한 초음파 진동자 설계

Design Method for Ultrasonic Transducer to Bonding with Dissimilar Materials

  • 투고 : 2011.05.12
  • 심사 : 2011.11.17
  • 발행 : 2012.01.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In an attempt to improve adhesion strength between glass and metal due to use of Pb-free solder as a sealant between glass and metal in the manufacturing process of vacuum insulation window glass to maintain the vacuum volume, ultrasonic energy is often applied during the process of Pb-free sealing. In this study, we propose an ultrasonic vibrator with a 4 mm end tip radius which performs resonance frequency of 60 kHz and 14 um or higher vibration displacement. A frequency variation due to applied pressure on piezo disks, which was excluded in the computer simulation, was verified experimentally, and we have demonstrated a 17 um vibration displacement at 50 V input through the performance test of a vibrator constructed with our specification.

키워드

참고문헌

  1. Yoo, C. D., 2008, Design of Ultrasonic Welding Horn, Journal of the Korea Welding and Joining Society, Vol. 26, No. 1, pp. 9-11. https://doi.org/10.5781/KWJS.2008.26.1.009
  2. Byun, J. W. and Han, S. H., 2011, Design of a Ultrasonic Cutting-tool Utilizing Resonance Condition of Transverse Vibration of Beam Type Structure, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 21, No. 8, pp. 720-725. https://doi.org/10.5050/KSNVE.2011.21.8.720
  3. Jeong, A. M., Jeon, E. S. and Kim, C. H., 2011, A Study on the Metal-glass Bonding Using Ultrasonic, Journal of the Semiconductor & Display Technology, Vol. 10, No. 2, pp. 103-108.
  4. Kang, J. P., 1991, A Study on the Design of Ultrasonic Vibration Cutting Tool Horn, Journal of the Korea Society for Precision Engineering, Vol. 8, No. 3, pp. 55-63.
  5. Lin, S., 1996, Study on the Longitudinaltorsional Composite Mode Exponential Ultrasonic Horns, Ultrasonic, Vol. 34, No. 7, pp. 757-762. https://doi.org/10.1016/0041-624X(96)00062-5
  6. Sherrit, S., Dolgin, B. P. and Bar-Cohen, Y., 1999, Modeling of Horns for Sonic/Ultrasonic Application, Ultrasonic Symposium, Vol. 1, pp. 647-651.
  7. Kim, S. R., Lee, J. H. and Yoo, C. D., 2009, Design of Cylinder Horn for Ultrasonic Welding, Journal of the Korea Welding and Joining Society, Vol. 27, No. 4, pp. 60-66. https://doi.org/10.5781/KWJS.2009.27.4.060
  8. Kim, I. K., Hong, S. H. and Lee, S. I., 2008, Vibration Analysis of Ultrasonic Horn for Flip-chip Bonding, Proceedings of the KSNVE Annual Autumn Conference, pp. 364-367.
  9. Lee, D. H., Park, S. J., Tao, Y., Kim, D. O. and Yun, C. H., 2007, Transducer Design for Ultrasonic Metal Welder, Journal of the Korea Society for Precision Engineering, Proceedings of the KIPE Conference, pp. 337-339.
  10. 上羽貞行, 富川義朗, 2000, 超音波電動機の理論と應用, pp. 168-170.