초록
본 논문에서는 주파수 변조 단속 지속파(Frequency Modulated Interrupted Continuous Wave: FMICW) 시스템을 기반으로 한 고해상도(HRR: High Range Resolution) 레이더 탐색기에서 발생하는 스퓨리어스(Spurious)를 제거하기 위한 스펙트럼 분석 기법에 대해서 연구하고 새로운 제거 기법을 제안한다. 주파수 변조 지속파(Frequency Modulated Continuous Wave: FMCW)를 기반으로 하는 고해상도 레이더 시스템과 다르게 FMICW를 사용한 시스템은 주기적으로 나타나는 비연속적 IF(Intermediate Frequency) 신호에 의해 스펙트럼 상에서 스퓨리어스가 생기게 된다. 이러한 스퓨리어스를 제거하기 위해서 대역 통과 필터(band pass filter)를 사용하면 FMICW 시스템의 정확도가 이전 추정된 거리 값에 의존적이 되고 random interrupted sequence를 사용하면 noise floor가 증가하며, staggering process를 사용하면 중복된 정보를 위해 여러 개의 파형을 송신해야 되는 단점이 있다. 최근 소개된 IAA(Iterative Adaptive Approach) 또는 SPICE(SemiParametric Iterative Covariance-based Estimation method)와 같은 스펙트럼 분석 기법을 이용하면 이러한 단점 없이 FMICW 시스템에서의 스퓨리어스를 효과적으로 제거할 수 있다. IAA 또는 SPICE를 사용하기 위해서는 신뢰할 수 있는 데이터(reliable data)와 신뢰할 수 없는 데이터(unreliable data)를 구분하고, 신뢰할 수 있는 데이터만 이용하여야 하는데, 이를 위해서 STFT(Short Time Fourier Transform)가 적용된다.
In this thesis, we develop a spectral analysis scheme to eliminate the spurious peaks generated in HRR Millimeterwave Seeker based on FMICW system. In contrast to FMCW system, FMICW system generates spurious peaks in the spectrum of its IF signal, caused by the periodic discontinuity of the signal. These peaks make the accuracy of the system depend on the previously estimated range if a band pass filter is utilized to eliminate them and noise floor go to high level if random interrupted sequence is utilized and in case of using staggering process, we must transmit several waveforms to obtain overlapped information. Using the spectral analysis one of the schemes such as IAA(Iterative Adaptive Approach) and SPICE(SemiParametric Iterative Covariance-based Estimation method) which were introduced recently, the spurious peaks can be eliminated effectively. In order to utilize IAA and SPICE, since we must distinguish between reliable data and unreliable data and only use reliable data, STFT(Short Time Fourier Transform) is applied to the distinguishment process.