초록
본 논문은 가설 와이어 케이블 동적모델과 장력유지/이동 제어를 위한 작업로봇의 제어기 설계에 대하여 나타내었다. 제어기 설계를 위해서 로봇이 가설 와이어 케이블의 일정장력을 유지하고 당기면서 이동할 때 와이어의 길이 변화와 무게 변하의 영향을 고려한 와이어 동적모델을 나타내었다. 또한 와이어 동적모델에 기초하여 로봇 이동 시작에서 발생하는 장력이 수치해석에 의해 검토되었다. 가설 와이어 동적 모델에 기초하여 장력/이동제어를 위한 작업로봇이 구성되었고 두 동작이 서로 간섭이 억제되는 피드포워드 제어기가 설계되었다. 작업 로봇의 운전조건에 따른 시뮬레이션과 실제 실험결과는 그 유효성이 검증되었다.
In this paper, an approach to designing controllers for the tension/movement control of working robot to install a stringing wire cable is presented. To design a controller, when the robot moves a certain distance maintaining constant tension, the dynamic model of a stringing wire cable which considers effects of weights according to changing lengths is presented. Also the tension at startup of the working robot is studied by numerical analysis which is based on the equation of the dynamic wire model. From the dynamic model for a stringing wire cable, working robot for tension/movement control is suggested and designed a feedforward controller with a accelerator gain to suppress a mutual interference of the both tasks of tension/movement control. Depending on the operating conditions of the working robot, the effectiveness of the suggested system has been verified by the simulation and experimental results.