반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

PC 및 PMMA 수지를 이용한 LED 백라이트용 확산판의 제조 및 특성 연구

Preparation and Characteristics of PC and PMMA-Based Diffusers for LED Backlight Unit

  • Kim, Nam Yi (Department of Chemical Engineering, Kyonggi University) ;
  • Kim, Hyo Jin (Department of Advanced Materials Engineering, Kyonggi University) ;
  • Kim, Dong Won (Department of Advanced Materials Engineering, Kyonggi University) ;
  • Jo, Jae Hyun (Department of advanced development, DS Co., Ltd.) ;
  • Kim, Seong Woo (Department of Chemical Engineering, Kyonggi University)
  • 투고 : 2012.02.09
  • 심사 : 2012.03.15
  • 발행 : 2012.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The optical diffuser for direct-lit LED backlight unit was prepared by using extrusion compounding followed by thermoforming process. Poly(methyl methacrylate) (PMMA) with superior optical characteristics and polycarbonate (PC) with good thermal property were used as base resins, and crosslinked polystyrene (PS) and PMMA beads as diffusing agents were incorporated into resin matrix to derive light scattering and diffusing action. In the compounded plate, the diffusing beads were observed to be dispersed uniformly and distinctly in the continuous phase. The inclusion of polymeric beads up to 3 wt% substantially enhanced the optical characteristics such as luminance, luminance uniformity, haze for the diffuser. Two different diffusers of PC and PMMA-based compound with various compositions were compared in terms of measured optical, thermal, and mechanical properties, which would be expected to be utilized for the industrial application of LED backlight unit.

키워드

참고문헌

  1. Kim. G. H., "A PMMA Composite as an Optical Diffuser in a Liquid Crystal Display Backlighting Unit(BLU)", Eur. Polym., Vol. 41, pp. 1729-1737, 2005. https://doi.org/10.1016/j.eurpolymj.2005.02.029
  2. Tagaya A, Ishii S, Yokoyama K, Higuchi E, Koike Y., "The Advanced Highly Scattering Optical Transmission Polymer Backlight for Liquid Crystal Displays", Jpn. J. Appl. phys., Vol. 41, pp. 2241-8, 2002. https://doi.org/10.1143/JJAP.41.2241
  3. Kim. G. H., Kim. W. J., Son. J. G., "Analysis of Thermo-physical and Optical Properties of a Diffuser using PET/PC/PBT Copolymer in LCD Backlight Units", South Korea J. Displays, Vol. 26, pp. 37-43, 2005.
  4. Lin. F. C., Liao. L. Y., Liao. C. Y., Huang. Y. P., Shieh. H. P. D., "Dynamic Backlight Gamma on High Dynamic Range LCD TVs", J. Display Technol. Vol. 4, No. 2, pp. 139-146, 2008. https://doi.org/10.1109/JDT.2008.920175
  5. Cornelissen. H. J., Huck. H. P. M., Broer. D. J., Picken. S. J., Bastiaansen. C. W. M., Erdhuisen. E., Hpolarized. N. M., "Polarized Light LCD Backlight Based on Liquid Crystalline Polymer Film", SID Int. Symp. Digest Technol. Papers, pp. 1178-1181, 2004.
  6. Kim. G. H., Park. J. H., "A PMMA Optical Diffuser Fabricated using an Electrospray Method", J. Appl. Phys. A, Vol. 86, pp. 347-351, 2007. https://doi.org/10.1007/s00339-006-3767-x
  7. Park. G. J., Kim. Y. G., Yi. J. H., Kwon. J. H., "Enhancement of the Optical Pergormance by Optimization of Optical Sheets in Direct-illumination LCD Backlight", J. Opt. Soc. Kor., Vol. 13, No. 1, pp. 152-157, 2009. https://doi.org/10.3807/JOSK.2009.13.1.152
  8. Abileah. A., "LCD Backlight Methodology and Applications Using Optical Enhancement Films", J. Society for Information Display, Vol. 24, pp. 28-35, 2008.
  9. Kuo. H. P., Chuang. M. Y., Lin. C. C., "Design Correlations for the Optical Performance of the Particle-diffusing Bottom Diffusers in the LCD Backlight Unit", J. Powder Technol., Vol. 192, pp. 116-121, 2009. https://doi.org/10.1016/j.powtec.2008.12.003
  10. Ju. Y. H., Park. J. H., Lee. J. H., Lee. J. Y., Nahm. K. B., Ko. J. H., "Study on the Simulation Model for the Optimization of Optical Structures of Edge-lit Backlight for LCD Applications", J. Opt. Soc. Kor., Vol. 12, No. 1, pp. 25-30, 2008. https://doi.org/10.3807/JOSK.2008.12.1.025
  11. Huang. T. C., Ciou. J.R., Huang. P. H., Hsieh. K. H, Yang. S. Y., "Fast Fabrication of Integrated Surfacerelief and Particle-diffusing Plastic Diffuser by Use of a Hybrid Extrusion Roller Embossing Process", Opt. Express, Vol. 16, No.1, pp. 440, 2008. https://doi.org/10.1364/OE.16.000440
  12. Park. G. J., Aum. T. S. Kwon. J. H., Park. H. H., Kim. B. K., Shin. J. K., "Characterization and Modeling Light Scattering in Diffuser Sheets", J. Kor. Phys. Soc., Vol. 54, No. 1, pp. 44-48, 2009. https://doi.org/10.3938/jkps.54.44
  13. Lu. Z. Z., "High Performance Low Cost Multifunctional Film for LCD Backlight" SID Int. Symp. Digest Technol. Papers, Vol. 39, No. 3, pp. 1579-1582, 2008.
  14. Suzuki. M., Hsieh H. S., Huang K. T., "Design Considerations for a Backlighting Unit for a Large Area LCD-TV", International Display Workshop, pp. 669-672, 2003.
  15. Gurel. E. E., Peters. P. M., Graf. J., "Development of Polycarbonate Diffuser Films for Liquid Crystal Displays", Annual Technical Conference-ANTEC Vol. 2, pp. 1167-1171, 2007.