Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Tribological Properties of Hybrid Friction Materials: Combining Low-steel and Non-steel Friction Materials

금속계와 유기계 마찰재의 분포에 따른 하이브리드 마찰재의 마찰 특성

  • Kim, JinWoo (Dept. of materials Science and engineering, Korea University) ;
  • Jang, Ho (Dept. of materials Science and engineering, Korea University)
  • 김진우 (고려대학교 신소재공학과) ;
  • 장호 (고려대학교 신소재공학과)
  • Received : 2012.04.01
  • Accepted : 2012.04.29
  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Tribological properties of hybrid type friction materials were studied. Hybrid friction materials were produced by combining non-steel(NS) and low-steel(LS) type friction materials. The emphasis of the investigation was given to possible synergistic effects from the two different friction materials, in terms of friction stability at high temperatures and the amplitude of friction oscillation, also known as stick-slip at low sliding speeds. The high temperature friction test results showed that the friction effectiveness of the hybrid friction material was well sustained compared to LS and NS friction materials. Wear resistance of the hybrid type was similar to LS friction materials. Examination of the rubbing surfaces after tests revealed that the friction characteristics of the hybrid friction material were attributed to the wear debris produced from low-steel friction materials, which were migrated to the surface of the non-steel friction material, forming new contact plateaus. The stick-slip amplitude and its frequency were pronounced when non-steel friction material was tested, while hybrid and low-steel types showed relatively small stick-slip amplitudes. These results suggest possible improvement of tribological properties by designing a hybrid composite of low-steel and non-steel friction materials.

Keywords

References

  1. E. Rabinowicz, "Friction and Wear of Materials," 2nd edition, pp. 107-109, John Wiley & Sons, New York, 1995.
  2. A. E. Anderson, ASM Handbook, 19thed., p.569-577, ASM International, Cleveland, 1992.
  3. I. M. Park and K. S. Shin, "Microstructure and Wear Properties of Low-AUoy Phosphoric Gray Cast Irons," Metals and Materials, Vol. 1, No. 1, pp. 63-70, 1995.
  4. M. G. Jacko and S. K. Rhee, "Kirk-Othmer Encyclopedia of Chemical Technology," 4thedition, Vol. 4, p. 523-536, John Wiley & Sons, New York, 1992.
  5. S. B. Park, K. H. Cho, and H. Jang, "Tribological Properties of Brake Friction Materials with Steel Fibers," Met. Mater. Int., Vol. 15, No. 1, p. 27-32, 2009. https://doi.org/10.1007/s12540-009-0027-6
  6. S. J. Kim, M. H. Cho, D. S. Lim, and H. Jang, "Synergistic Effects of Aramid Pulp and Potassium Titanate Whiskers in the Automotive Friction Material," Wear, Vol. 251, No. 1-12, pp. 1484-1491, 2001. https://doi.org/10.1016/S0043-1648(01)00802-X
  7. K. Friedrich, in: G. Crosa, I.J.R. Baumvol (Eds.), "Advances in Composite Tribology," Composite Materials Series 8, Elsevier, Amsterdam, 1993.
  8. R.G. East, "Evolution of friction materials for commercial vehicle disc brakes in: Proceedings of the International Conference on Disc Brakes for Commercial Vehicles," 1-2 November, p. 1, IMechE, London, 1988.
  9. M. G. Jacko, P. H. S. Tsang, and S. K. Rhee, "Automotive Friction Materials Evolution During the Past Decade," Wear, Vol. 100, No. 1-3, pp. 503-515, 1984. https://doi.org/10.1016/0043-1648(84)90029-2
  10. A. Patnaika, M. Kumara, B. K. Satapathyb, and B. S. Tomarc, "Performance Sensitivity of Hybrid Phenolic Composites in Friction Braking: Effect of Ceramic and Aramid Fibre Combination," Wear, Vol. 269, No. 11-12, pp. 891-899, 2010. https://doi.org/10.1016/j.wear.2010.08.023
  11. U. S. Hong, S. L. Jung, K. H. Cho, M. H. Cho, S. J. Kim, and H. Jang, "Wear Mechanism of Multiphase Friction Materials with Different Phenolic Resin Matrices," Wear, Vol. 266, No. 7-8, pp. 739-744, 2009. https://doi.org/10.1016/j.wear.2008.08.008
  12. S. S. Kim, M. W. Shin, H. J. Hwang, and H. Jang, "Friction and Vibration of Automotive Brake Pads Containing Different Abrasive Particles," Wear, Vol. 271, No. 7-8, pp. 1194-1202, 2011. https://doi.org/10.1016/j.wear.2011.05.037
  13. P.W. Centers and F.D. Price, "Tribological Performance of $MoS_{2}$ compacts Containing Sulfur, $Sb_{2}S_{3}$ or $Sb_{2}S_{4}$," Wear, Vol. 129, No. 2, pp. 205-213, 1989. https://doi.org/10.1016/0043-1648(89)90258-5
  14. M. H. Cho, S. J. Kim, and H. Jang, "Tribological Properties of Solid Lubricants (Graphite, $Sb_{2}S_{3}$, $MoS_{2}$) for Automotive Brake Friction Materials," Wear, Vol. 260, No. 7-8, pp. 855-860, 2006. https://doi.org/10.1016/j.wear.2005.04.003

Cited by

  1. An Experimental Study on the Effect of Wear Type of Brake Friction Material on the Squeal Noise vol.25, pp.6, 2017, https://doi.org/10.7467/KSAE.2017.25.6.659