Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)

The Korean Society for Nondestructive Testing (한국비파괴검사학회)
권호 표지
DOI QR코드

DOI QR Code

Design of a Bimorph Piezoelectric Energy Harvester for Railway Monitoring

  • Li, Jingcheng (Civil and Environmental Engineering Department, University of Connecticut) ;
  • Jang, Shinae (Civil and Environmental Engineering Department, University of Connecticut) ;
  • Tang, Jiong (Mechanical Engineering Department, University of Connecticut)
  • Received : 2012.11.01
  • Accepted : 2012.11.26
  • Published : 2012.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Wireless sensor network is one of prospective methods for railway monitoring due to the long-term operation and low-maintenance performances. How to supply power to the wireless sensor nodes has drawn much attention recently. In railway monitoring, the idea of converting ambient vibration energy from vibration of railway track induced by passing trains to electric energy has made it a potential way for powering the wireless sensor nodes. In this paper, a bimorph cantilever piezoelectric energy harvester was designed based on a single degree-of-freedom model. Experimental test was also performed to validate the design. The first natural frequency of the bimorph piezoelectric energy harvester was decreased from 117.1 Hz to 65.2 Hz by adding 4 gram tip mass to the free end of the 8.6 gram energy harvester. In addition, the power generation of the piezoelectric energy harvester with 4 gram tip mass at resonant frequency was increased from 0.14 mW to 0.74 mW from $2.06m/s^2$ base excitation compared to stand-alone piezoelectric energy harvester without tip mass.

Keywords

References

  1. G. Park, T. Rosing, M. D. Todd, C. R. Farrar and W. Hodgkiss, "Energy harvesting for structural health monitoring sensor networks," Journal of Infrastructure Systems, ASCE, Vol. 14, No. 1, pp. 64-79 (2008) https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(64)
  2. C. B. Williams and R. B. Yates, "Analysis of a micro-electric generator for microsystems," Sensors and Actuators, Vol. 52, pp. 8-11 (1996) https://doi.org/10.1016/0924-4247(96)80118-X
  3. S. P. Beeby, M. J. Tudor and N. M. White, "Energy harvesting vibration sources for microsystems applications," Measurement Science and Technology, Vol. 17, pp. 175-195 (2006) https://doi.org/10.1088/0957-0233/17/12/R01
  4. S. Jang, H. Jo, S. Cho, K. Mechitov and J. Rice, "Structure health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation," Smart Structures and Systems, Vol. 6, No. 5-6, pp. 439-459 (2010) https://doi.org/10.12989/sss.2010.6.5_6.439
  5. P. Glynne-Jones, S. P. Beeby and N. M. White, "Towards a piezoelectric vibration powered microgenerator," IEEE Science Measurement and Technology, Vol. 148, No. 2, pp. 68-72 (2001) https://doi.org/10.1049/ip-smt:20010323
  6. N. E. duToit and B. L. Wardle, "Experimental verification of models for microfabricated piezoelectric vibration energy harvesters," AIAA Journal, Vol. 45, pp. 1126-1137 (2007) https://doi.org/10.2514/1.25047
  7. A. Erturk and D. J. Inman, "An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations," Smart Materials and Structures, Vol. 18, 025009 (2009) https://doi.org/10.1088/0964-1726/18/2/025009
  8. S. Roundy, P. K. Wright and J. Rabaey, "A study of low lever vibration as a power source for wireless sensor nodes," Computer Communication, Vol. 26, pp. 1131-1144 (2003) https://doi.org/10.1016/S0140-3664(02)00248-7
  9. S. Roundy and P. K. Wright, "A piezoelectric vibration base generator for wireless electronics," Smart Materials and Structures, Vol. 13, pp. 1131-1142 (2004) https://doi.org/10.1088/0964-1726/13/5/018
  10. S. A. Suhairy, "Prediction of Ground Vibration from Railways," SP Swedish National Testing and Research Institute, SP Report (2000)
  11. Aylesbury Vale Parkway Development Railway Vibration. MM Doc Ref: 229338/46 Rev. A (2007)
  12. P. Chatterjee, G. Degrande, S. Jacobs, J. Charlier, P. Bouvet and D. Brassenx, "Experimental results of free field and structural vibrations due to underground railway traffic," 10th International Congress on Sound and Vibration, Stockholm, Sweden (2003)
  13. G. Gegrande, P. Chatterjee, W. Van de Velde, P. Hölscher, V. Hopman, A. Wang, N. Dadkah and R. Klein, "Vibration due to a test train at variable speeds in a deep bored tunnel embedded in London clay," 11th International Congress on Sound and Vibration, St-Petersburg, Russis (2004)
  14. A. Erturk and D. J. Inman, "Issues in mathematical modeling of piezoelectric energy harvester," Smart Material and Structure, Vol. 17, 065016 (2009)
  15. V. R. Challa, M. G. Prasad and F. T. Fisher, "A coupled piezoelectric-electromagnetic energy harvesting technique for achieving increased power output through damping matching," Smart materials and Structures, Vol. 18, 095029 (2009) https://doi.org/10.1088/0964-1726/18/9/095029
  16. Piezo Systems, Inc. http://www.piezo.com/ prodbm1brass.html

Cited by

  1. Effect of subgrade on piezoelectric energy harvesting under traffic loads pp.1477-268X, 2018, https://doi.org/10.1080/10298436.2017.1413241
  2. Vibration energy harvesting from roads under traffic loads pp.2164-7402, 2018, https://doi.org/10.1080/14680629.2018.1527719