Abstract
Coal ash generated from thermal power plants is planned to use for mine filling in order to prevent subsidence of the ground. In according, the basic physical properties and flow characteristics were grasped using coal ash from generated Yeongdong thermal power plant, and hydraulic filling experiments were performed a total of eight times by manufacturing the model of 1 inclined shaft in Hanbo coal mine. The specific gravity of coal ash is 2.34, and the result of particle size analysis belongs to silty sand (SM). Coal ash of weight ratio of 60% was used in the filling experiments of the model, since liquefaction have shown in coal ash less than weight ratio of 70% from the result of slump and flow test. The outlet should be located at the bottom of the inclined and vertical shaft, this was favorable way in improving the filling efficiency from the experiment results regardless of groundwater exists.
화력발전소에서 발생하는 석탄회를 지반침하의 방지를 위하여 갱내충전용으로 사용하고자 한다. 따라서 영동화력발전소에서 발생하는 석탄회를 이용하여 기본적인 물리적 특성 및 유동 특성을 파악하였으며, 한보탄광의 제1사갱을 대상으로 모형갱도를 제작하여 총 8회의 수압식 충전실험을 수행하였다. 석탄회의 비중은 2.34이고 입도분석결과 실트질 모래인 SM에 해당한다. Slump 시험 및 Flow 유동시험 결과 석탄회 70 wt,% 이하에서 액상형태로 나타나므로 모형충전실험에서는 석탄회 60 wt,%를 적용하였다. 모형충전시험결과 갱내수 유, 무에 상관없이 토출구를 사갱이나 수갱 바닥에 위치시키는 것이 충전효율을 향상시키는데 유리한 방법임을 확인하였다.