DOI QR코드

DOI QR Code

고강도 콘크리트 내화피복용 경량 모르터의 온도이력 성상

Properties of Temperature History of Lightweight Mortar for Fire Protection Covering Material in High Strength Concrete

  • 임서형 (경남과학기술대학교 건축공학과)
  • Lim, Seo-Hyung (Dept. of Architecture Engineering, Gyeongnam National Univ. of Science and Technology)
  • 투고 : 2012.10.11
  • 심사 : 2012.12.07
  • 발행 : 2012.12.31

초록

폭렬은 철근노출과 함께 구조부재의 단면을 감소시키며, 이로 인하여 구조적 거동에 심각한 문제를 발생시킨다. 고강도 콘크리트에 내화 모르터를 피복함으로서 화재시 폭렬을 방지할 수 있으며, 콘크리트 내의 철근의 온도상승을 지연시킬 수 있다. 본 연구의 목적은 이러한 고강도 콘크리트의 내화피복재로 활용하기 위한 것으로 퍼라이트와 폴리프로필렌 섬유로 경량 모르터를 제조하여 온도이력 성상을 파악하는데 있다. 이에 따른 실험인자로는 폴리프로필렌 섬유의 첨가량과 길이이다. 연구결과 폴리프로필렌 섬유를 첨가함으로서 모르터의 공극구조를 변화시킬 수 있었으며, 이는 내부 온도상승을 지연시킨다. 또한 고강도 콘크리트의 내화피복재로서 경량 모르터를 사용할 수 있는 가능성을 확인하였다.

The spalling causes the sever reduction of the cross sectional area with the exposure of the reinforcing steel, which originates a problem in the structural behaviour. By coating surface of high strength concrete with fireproof mortar, the high strength concrete is protected from the spalling in fire and the method to constrain the temperature increase of steel bar within the concrete. The purpose of this study is to investigate the temperature history properties of lightweight mortar using perlite and polypropylene fiber for fire protection covering material. For this purpose, selected test variables were the contents and length of polypropylene fiber. As a result of this study, it has been found that addition of polypropylene fiber to mortar modifies its pore structure and this causes the internal temperature to rise. And it has been found that a new lightweight mortar can be used in the fire protection covering material.

키워드

참고문헌

  1. C. G. Han, S. H. Yang, M. C. Han and C. C. Pei, "The Influence of Polymer Contents and Appearance on Spalling Prevention of High Strength Concrete", Journal of Architectural Institute of Korea Structure & Construction, Vol. 24, No. 5, pp. 93-100 (2008).
  2. J. S. Lee, C. C. Pei, S. W. Jee, C. P. Han, S. H. Yang and C. G. Han, "Prevention of Spalling of High Performance Concrete Depending on the Contents of Hybrid Organic Fiber", Proceeding of Autumn Annual Conference of the Architectural Institute of Korea Structure & Construction, Vol. 28, No. 1, pp. 415-418 (2008).
  3. Y. C. Song, Y. R. Kim, J. K. Oh, O. J. Kim, D. B. Lee and Y. J. Kwon, "A Study on Fire Protection Covering Method to Secure Fire Resistance Performance of High Strength Concrete", Proceeding of Autumn Annual Conference of the Architectural Institute of Korea Structure & Construction, Vol. 28, No. 1, pp. 423-426 (2008).
  4. M. H. Lee, "A Study of Test on the Improvement of the Performance of Fire-Resistance Board made of Inorganic Polymer", Journal of Architectural Institute of Korea Structure & Construction, Vol. 24, No. 11, pp. 119-126 (2008).
  5. S. H. Lim, S. H. Yoo and J. W. Moon, "Study on the Mechanical Properties of Lightweight Mortar for Fire Protection Covering Material in High Strength Concrete", Journal of Korean Institute of Fire Science & Engineering, Vol. 24, No. 5, pp. 8-13 (2011).
  6. D. H. Jung and C. H. Seo, "An Experimental Study on the Strength of Lightweight Mortar Using the Perlite", Proceeding of Autumn Annual Conference of the Architectural Institute of Korea Structure & Construction, Vol. 8, No. 2, pp. 703-706 (1988).
  7. G. Y. Kim, G. C. Choe, J. H. Lee, S. H. Lee and T. G. Lee, "Evaluation on Spalling Properties of Ultra High Strength Concrete with Melting and Vaporization of Fiber", Journal of the Korea Concrete Institute, Vol. 24, No. 2, pp. 173-183 (2012). https://doi.org/10.4334/JKCI.2012.24.2.173
  8. J. P. Won, C. I. Jang, H. Y. Kim and W. Y. Kim, "Spalling and Internal Temperature Distribution of High Strength Column Member with Polypropylene Fiber Volume Fractions", Journal of the Korea Concrete Institute, Vol. 20, No. 6, pp. 821-826 (2008). https://doi.org/10.4334/JKCI.2008.20.6.821
  9. S. H. Yang, "Combined Effect of Fiber Addition and Fireproofing Protection Board on Residual Strength and Fire Resistance of High Strength Concrete", Journal of Architectural Institute of Korea Structure & Construction, Vol. 27, No. 12, pp. 155-162 (2011).
  10. S. H. Yoo and S. H. Lim, "Spalling Reduction Method of High-Strength Reinforced Concrete Columns Using Insulation Mortar", Journal of Korean Institute of Fire Science & Engineering, Vol. 25, No. 6, pp. 8-13 (2011).