DOI QR코드

DOI QR Code

프리캐스트 중공 사각형 철근콘크리트 교각의 내진성능

Seismic Performance of Hollow Rectangular Precast Segmental Piers

  • 이재훈 (영남대학교 건설시스템공학과) ;
  • 박동규 (삼성물산(주)건설부문) ;
  • 최진호 (영남대학교 건설시스템공학과) ;
  • 신성진 ((주)한맥기술 기술연구소)
  • 투고 : 2012.07.04
  • 심사 : 2012.09.11
  • 발행 : 2012.12.31

초록

프리캐스트 중공 사각형 철근콘크리트 교각에 대하여 준정적 실험을 수행하여 내진성능을 검증하였다. 기둥 실험체는 프리캐스트 세그먼트를 접합하고 나서, 미리 배치된 쉬스관에 축방향 철근을 연결 없이 연속으로 배치한 후 모르타르로 그라우팅하는 방법으로 제작하였다. 실험의 주요변수는 형상비, 축방향 철근비, 횡방향 철근량, 프리캐스트 세그먼트의 접합위치이다. 기둥 실험체의 형상비는 4.5와 2.5, 축방향 철근비는 1.15%와 3.07%로 각각 두 가지의 값을 가진다. 횡방향 철근량은 도로교설계기준에서 규정하고 있는 완전연성 설계에 요구되는 양의 99%, 55%, 50%, 27%로 배근되었다. 소성힌지 구역에서의 프리캐스트 세그먼트 접합위치는 기둥 하단에서 기둥단면 두께의 0.5배와 1.0배인 위치로 하였다. 실험 결과로서 균열 및 파괴모드, 축력-휨 강도, 하중-변위 포락선, 변위연성도를 분석하였으며, 도로교설계기준의 연성도 내진설계법을 적용하였을 때의 안전율을 분석하였다. 기둥 실험체는 축방향 철근이 모르타르와 쉬스관에 의하여 구속되고, 쉬스관이 횡방향 철근으로 구속되는 구조로 인하여 큰 변위까지 축방향 철근의 좌굴이 지연되어 연성도가 크게 나타났다.

Precast reinforced concrete bridge columns with hollow rectangular section were tested under cyclic lateral load with constant axial force to investigate its seismic performance. After all the precast column segments were erected, longitudinal reinforcement was inserted in the sheath prefabricated in the segments, which were then mortar grouted. Main variables of the test series were column aspect ratio, longitudinal reinforcement ratio, amount of lateral reinforcement, and location of segment joints. The aspect ratios were 4.5 and 2.5, and the longitudinal steel ratios were 1.15% and 3.07%. The amount of lateral reinforcement were 95%, 55%, 50%, and 27% of the minimum amount for full ductility design requirements in the Korean Bridge Design Code. The locations of segment joints in plastic hinge region were 0.5 and 1.0 times of the section depth from the bottom column end. The test results of cracking and failure mode, axial-flexural strength, lateral load-displacement relationship, and displacement ductility are presented. Then, safety of the ductility demand based seismic design in the Korean Bridge Design Code is discussed. The column specimens showed larger ductility than expected, because buckling of longitudinal reinforcing bar was prevented due to confinement developed not only by transverse steel but also by sheath and infilling mortar.

키워드

참고문헌

  1. Lee, J. H. and Yang, J. H., "New Trend of Technology for prestressed Concrete Bridge Superstructures," Magazine of the Korea Concrete Institute, Vol. 16, No. 2, 2004, pp. 24-30.
  2. P.S. Ltd., Hiyumu of Japan, Ltd., Dopi Construction Industry Ltd., "Experimental Reports for Development length of High Strength and Large Diameter Deformed Bar at PCa.PRC Type Structures (PCa.PRC構タ造に係る 高强度.太徑鐵筋の定着實驗報告書)," Technical Institute of PCa Pier, Japan, 2002, pp. 1-34.
  3. P.S. Ltd., Hiyumu of Japan, Ltd., Dopi Construction industry Ltd., "Cyclic Loading Test of PCa Pier (PCa 橋脚に係る梁正負交番載荷試驗)," Technical Institute of PCa pier, Japan, 2003, pp. 1-59.
  4. Lee, Y. H., Kwon, T. G., Lee, S. H., and Hwang, Y. K., "Experimental Study of Seismic Performance on Precast RC Columns," Proceeding, KSCE, 2007, pp. 3952-3955.
  5. Kim, T. H., Kim, Y. J., Kim, S. W., Shin, and H. M., "Performance Assessment of Precast Concrete Segmental Bridge Columns with Shear Resistance Connecting Structure," Journal of the KSCE, Vol. 28, No. 4A, 2008, pp. 591-601.
  6. Research Committee of Precast Pier of KCI, "Precast Pier," Research Committee Report of Proceeding, KCI, http://www.kci.or.kr/, PDS download No. 14, 2009.
  7. Kim, T. H., Park, S. J., Kim, Y. J., Kim, S. W., Yoon, W. S., and Han, S. G., "The First Field Application of Precast Segmental PSC Bridge Columns," Magazine of the Korea Concrete Institute, Vol. 21, No. 5, 2009, pp. 73-79.
  8. Korea Road & Transportation Association, The Specification of Road Bridge, GunsulBook, 2010. pp. 1-602.
  9. Lee, J. H., Hwang, J. K., and Choi, J. H., "Safety of Ductility Demand Based Seismic Design for Circular RC Bridge Columns," Journal of the Korea Concrete Institute, Vol. 20, No. 2, 2008, pp. 193-202. https://doi.org/10.4334/JKCI.2008.20.2.193
  10. Lee, J. H. and Son, H. S., "Modified Equation for Ductility Demand Based Confining Reinforcement Amount of RC Bridge Columns," Journal of the Korea Concrete Institute, Vol. 21, No. 2, 2009, pp. 169-178. https://doi.org/10.4334/JKCI.2009.21.2.169
  11. Lee, J. H. et al., "Rapid Construction of Piers with Precast System," Final Report, Civil Department of Yeungnam University, SAMSUNG C&T, 2009, 175 pp.
  12. Sun, C. H., "A Study on Seismic Details of Hollow Rectangular Sectional Piers Considering Flexural Ductility and Shear Capacity," Doctoral Dissertation, University of Ulsan, Korea, 2008, 215 pp.
  13. Park, R., Ductility of Structural Concrete, IABSE Colloquium, Stuttgart, 1991.
  14. Priestley, M. J. N., Seible, F., and Calvi, G. M. Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York, USA, 1996.

피인용 문헌

  1. Performance Assessment of Hollow Precast Segmental Bridge Columns with Reinforcement Details for Material Quantity Reduction vol.20, pp.1, 2016, https://doi.org/10.5000/EESK.2016.20.1.033
  2. Determination of Effective Prestress of Post-tensioned Precast Bridge Piers vol.20, pp.3, 2016, https://doi.org/10.5000/EESK.2016.20.3.135