References
- Chang, G.C.Y., 1962. Analysis and Design of Structural Tee-Connections in Tension, Unpublished Report prepared in partial fulfillment of the requirement for CE 497, Special Problem, University of Illinois, Urbana, IL, USA.
- Douty, R.T. and McGuire, W., 1963. Research on Bolted Moment Connections - A Progress Report, Proceedings of the 1963 AISC National Engineering Conference, Tulsa, OK, April 24-26, AISC, 48-55.
- Hong, S., Kim, H.W., Choi, J.S., Yeu, T.K., Park, S.J., 2008. Development of a Test Miner System for Deep-seabed Manganese Nodule, 2008 KAOSTS joint Sym, 179-184.
- Kim, J.H., Yeu, T.K., Park, S.J., Yoon, S.M., Hong, S., 2011. The Introduction of Underwater Connection Technique for Use Electric-Electronic System of Pilot Mining Robot, Proc. of 2011 KSOE Fall Conf., 46-49.
- Kulak G.L., Fisher J.W., and Struik, J.H.A., 1987. A Guide to Design Criteria of Bolted and Riveted Joints, Second Edition, Wiley-Interscience, 263-288.
- Leahey, T.F. and Munse, W.H., 1956. Static and Fatigue Tests of Rivets and High-Strength Bolts in Direct Tension, Structural Research Series No. 80, University of Illinois, Urbana, IL, USA.
- Lee, H.B., Kim, H.M., Yang, C.J., Park, S.S., 2000. A Study on the Strength and Deformation Characteristics of T-Stub Connection, Journal of the architectural institute of Korea, 16(10), 49-55.
- Nair, R.S., Birkemoe, P.C., Munse, W.H., 1974. High Strength Bolts Subjected to Tension and Prying, Journal of the Structural Division, 100(2), 351-372.
- Park, S.J., Yeu, T.K., Yoon, S.M., Kim, J.H., Hong, S., Kim, H.W., Choi, J.S., 2011. Requirements for Electrical and Electronics System Design of Pilot Miner, 2011 KAOSTS joint Sym., 1720-1723.
- Struik J.H.A., de Back J., 1969. Tests on Bolted T-Stubs with Respect to a Bolted Beam-to-Column Connections, Report 6-69-13, Stevin Laboratory, Delft University of Technology, Delft, the Netherlands
- Thornton W.A., 1985. Prying Action - a General Treatment, Engineering Journal, AISC, 22(2), 67-75.
- Timoshenko, S., Woinowsky-krieger, S., 1959. Theory of plates an shells, 2nd ed., McGraw Hill., Newyork, 105-179.
- Vincent, G.S., 1969. Tentative Criteria for Load Factor Design of Steel Highway Bridges, Steel research for construction bulletin No. 15, American Iron and Steel Institute, New York.