한국해양공학회지 (Journal of Ocean Engineering and Technology)

  • 제26권6호
  • /
  • Pages.39-45
  • /
  • 2012
  • /
  • 1225-0767(pISSN)
  • /
  • 2287-6715(eISSN)
한국해양공학회 (Korean Society of Ocean Engineers)
권호 표지
DOI QR코드

DOI QR Code

수중로봇용 덕트 추진기의 설계 및 성능해석

Design and Performance Analysis of Ducted Propulsor for Underwater Robot

  • 김경진 (부산대학교 기계공학부) ;
  • 이두형 (부산대학교 기계공학부) ;
  • 박원규 (부산대학교 기계공학부) ;
  • 박한일 (한국해양대학교 해양공학과)
  • Kim, Kyung-Jin (School of Mechanical Engineering, Pusan National University) ;
  • Lee, Doo-Hyoung (School of Mechanical Engineering, Pusan National University) ;
  • Park, Warn-Gyu (School of Mechanical Engineering, Pusan National University) ;
  • Park, Han-Il (Department of Ocean Engineering, Korea Maritime University)
  • 투고 : 2012.10.12
  • 심사 : 2012.12.11
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Underwater robots are generally used for the construction of seabed structures, deep-sea ecosystem research, ocean energy development, etc. A ducted marine propulsor is widely used for the thruster of an underwater robot because of its collision protection, efficiency increase, cavitation reduction, etc. However, the flow of a ducted propeller is very complex because it involves strong flow interactions between the blade impeller and duct. The present work aimed to design a ducted propeller using 2-D strip theory and CFD analysis. The hydrodynamic forces (i.e. and ) were computed to set the local angle of attack in a spanwise direction of the propeller blade. After the propeller design, performance coefficients such as the thrust, torque, and efficiency were computed to check whether the designed performance was achieved. To validate the present analysis, the thrust was compared with experimental data and good agreement was obtained.

키워드

참고문헌

  1. Jang, H.Y., Yang, A.Y., So, M.O., Park, H.I., 2010. Development of Underwater Thrusting System Driven by BLCD Motor. Proceedings of the Korean Society of Ocean Engineers 2010 Fall Annual Conference, Mokpo Korea, 41-45.
  2. Jang, J.H., Jung, Y.R., Park, W.G., 2004. Propulsive performance analysis of ducted marine propulsors with rotor- stator interaction, Journalof Shipand Ocean Technology, 8(1), 31-41.
  3. Joung, T.H., Sammut, K., He, F., Lee, S.K., 2009. A Study on the Motion Analysis and Design Optimization of Ducted Type AUV(Autonomous Underwater Vehicle) by Using CFD(Computational Fluid Dynamics) Analysis. Journal of the Korean Society of Ocean Engineers, 23(1), 48-53.
  4. Jung, Y.R., 2002. A Study on the Flow Characteristics of a Marine Propulsor with Variation of Tip Clearances Including Rotor-Stator Interaction. Doctoral Dissertation, Pusan National University.
  5. Jung, Y.R., Park, W.G., Jun, J.G., Lee, S.W., Lee, K.C., 2001. Numerical Flow Analysis of a Single-Stage Ducted Marine Propulsor. 7th International Congresson Fluid Dynamicsand Propulsion, SHARM-EL-SHEIKH, SINAI, EGYP.
  6. Kerwin, J.E., Kinnas, S.A., Lee, J.T., Shih, W.Z., 1987. A surface panel method for the hydrodynamic analysis of ducted propellers. Transactions of SNAME, 1987-1995.
  7. Lee, J.M., Choi, H.T., Kim, K.H., Yeo, D.J., Lee, P.M., 2011. The Estimation of the Propulsion of a UUV Using Commercial Thruster. Journal of the Korean Society of Ocean Engineers, 25(1), 27-31.
  8. Park, W.G., Jang, J.H., Chun, H.H., Kim, M.C., 2005a. Numerical Flow and Performance Analysis of Waterjet Propulsion System. Ocean Engineering, 32, Issues 14-15, 1740-176. https://doi.org/10.1016/j.oceaneng.2005.02.004
  9. Park, W.G., Jung, Y.R., Kim, C.K., 2005b. Numerical Flow Analysis of Single-Stage Ducted Marine Propeller, Ocean Engineering, 32, 1260-1277. https://doi.org/10.1016/j.oceaneng.2004.10.022