Journal of Magnetics

  • 제17권4호
  • /
  • Pages.291-297
  • /
  • 2012
  • /
  • 1226-1750(pISSN)
  • /
  • 2233-6656(eISSN)
한국자기학회 (The Korean Magnetics Society)
권호 표지
DOI QR코드

DOI QR Code

Efficient Methodology for Reliability Assessment of Electromagnetic Devices Utilizing Accurate Surrogate Models Based on Dynamic Kriging Method

  • Kim, Dong-Wook (Department of Electrical Engineering, Kyungpook National University) ;
  • Jeung, Giwoo (Department of Electrical Engineering, Kyungpook National University) ;
  • Choi, K.K. (Mech. and Ind. Eng., Univ. of Iowa, Naval Arch. & Ocean Eng., Seoul Nat'l Univ.) ;
  • Kim, Heung-Geun (Department of Electrical Engineering, Kyungpook National University) ;
  • Kim, Dong-Hun (Department of Electrical Engineering, Kyungpook National University)
  • 투고 : 2012.11.01
  • 심사 : 2012.12.17
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an efficient methodology for accurate reliability assessment of electromagnetic devices. To achieve the goal, elaborate surrogated models to approximate constraint functions of interest are generated based on the dynamic Kriging method and a hypercube local window. Then, the Monte Carlo simulation scheme is applied to the surrogate models. This leads to reducing computational cost dramatically without degrading accuracy of the reliability analysis. The validity of the proposed method is tested and examined with a mathematical example and a loudspeaker design.

키워드

참고문헌

  1. A. Haldar and S. Mahadevan, Probability, Reliability, and Statistical Methods in Engineering Design, John Wiley & Sons, New York (2000).
  2. L. Lebensztajn, C. Marretto, M. Costa, and J. Coulomb, IEEE Trans. Magn. 40, 1196 (2004). https://doi.org/10.1109/TMAG.2004.824542
  3. K. Davey, IEEE Trans. Magn. 44, 974 (2008). https://doi.org/10.1109/TMAG.2007.916292
  4. S. Nabeta, I. Chabu, L. Lebensztajn, D. Correa, W. Silva, and K. Hameyer, IEEE Trans. Magn. 44, 1018 (2008). https://doi.org/10.1109/TMAG.2007.915137
  5. G. Lei, K. Shao, Y. Guo, J. Zhu, and J. Laver, IEEE Trans. Magn. 44, 3217 (2008). https://doi.org/10.1109/TMAG.2008.2002779
  6. L. Zhao, K. Choi, and I. Lee, AIAA Journal 49, 2034 (2011). https://doi.org/10.2514/1.J051017
  7. I. Lee, K. Choi, and L. Zhao, Struct. Multidisc. Optim. 44, 299 (2011). https://doi.org/10.1007/s00158-011-0659-2
  8. A. Silva, L. Resende, L. Manso, and V. Miranda, IEEE Trans. Power System 22, 1202 (2007).
  9. N. Pindoriya, P. Jirutitijaroen, D. Srinivasan, and C. Singh, IEEE Trans. Power System 26, 2483 (2011). https://doi.org/10.1109/TPWRS.2011.2116048
  10. G. Jeung, D. Kim, K. Choi, and D. Kim, IEEE Conf. CEFC12, in press (2011).
  11. F. Guimaraes, D. Lowther, and J. Ramirez, IEEE Trans. Magn. 42, 1207 (2006). https://doi.org/10.1109/TMAG.2006.871573
  12. MagNet User's Manual, Infolytica Corporation, Quebec, Canada (2008).

피인용 문헌

  1. Sequential Design Method for Geometric Optimization of an Electrothermal Microactuator Based on Dynamic Kriging Models vol.51, pp.3, 2015, https://doi.org/10.1109/TMAG.2014.2359681