DOI QR코드

DOI QR Code

매크로 섬유의 저혼입에 따른 콘크리트 포장의 역학적 특성

Mechanical Properties of Concrete Pavement by Low Fraction of Macro Fiber

  • 최성용 (한국건설기술연구원 인프라구조연구실) ;
  • 박영환 (한국건설기술연구원 인프라구조연구실) ;
  • 정우태 (한국건설기술연구원 인프라구조연구실) ;
  • 박종섭 (한국건설기술연구원 인프라구조연구실)
  • 투고 : 2012.02.02
  • 심사 : 2012.09.12
  • 발행 : 2012.12.17

초록

PURPOSES : The purpose of the study was to examine dynamic features of concrete after mixing a little macro fiber with small aspect ratio and long length utilized for bridge, tunnel and shotcrete for tensile performance and crack control in domestic/overseas countries with cement concrete pavement mix. METHODS : Coarse aggregates with small aspect ratio and macro fibers with maximum length of approximately 32 mm are introduced in small quantities in the mix proportions of concrete pavement so as to prevent loss of the workability. Then, this study intends to evaluate the applicability of macro fibers in the mix proportions of concrete pavement by examining the basic construction performance, as well as the change of toughness, the equivalent bending strength and the flexural toughness index caused by compression, bending, tension and the flexural stress-displacement curve. RESULTS : As the results, in each kind of macro fiber, polyvinyl alcohol fiber and steel fiber displayed a good performance. CONCLUSIONS : In 0.2 and 0.3% of fiber contents, it is appeared that polyvinyl alcohol fiber has a large effect on improvement of tensile performance and steel fiber on improvement of deforming performance of bending stress.

키워드

참고문헌

  1. Yang, S. C., Park, G. H., Kwon, S. M., Construction Trends of Korea Concrete Pavement. Korean Society of Road Engineers, Vol. 2, No. 3, 2000, pp.11-23.
  2. UM, J. Y., 2000. Methodology for Constraining Asphalt Concrete Oerlay Against Reflection Cracking, Research Paper, Korea Expressway Corporation.
  3. Park, D. G., Suh, Y. C., Ann, S. S., Kim, H.B., 2004. Behaviors of Early - Age Cracks on the JCP, Korean Society of Road Engineers, Journal Highway Engineering, Vol. 6, No. 2, pp.47-59
  4. Won, J. P., Hwang, K. S., Park, C. G., Park, H. G., 2004. Evaluation of Crack Control and Permeability of Hydrophilic PV A Fiber Reinforced Cement Composite. Journal of Korea Concrete Institute, Vol. 16, No. 2, pp.391-396. https://doi.org/10.4334/JKCI.2004.16.3.391
  5. Kim, M. H., Kim, J. H., Kim, Y. R., Kim, Y. D.. 2005. An Experimental Study on the Mechanical Properties of HPFRCCs Reinforced with the Micro and Macro Fibers. Journal of Korea Concrete Institute, Vol. 17, No. 2, pp.263-271. https://doi.org/10.4334/JKCI.2005.17.2.263
  6. Park, W. S., Yun, H. D., Jeon, Esther., 2008. Effects of PET Fiber Hybrid Conditions on Strain-Hardening Characteristics of Cement Composites. Architectural Institute of Korea, Vol. 24, No. 10, pp.37-44.
  7. Victor C. Li., and Large Volume 2002. High-Performance Applications of Fibers in Civil Engineering, Journal of Applied Polymer Science, Vol. 83, pp.660-686 https://doi.org/10.1002/app.2263
  8. Victor C. Li., Mishra, D. k.., and Wu, H. C., 1995. Matrix design for Pseudo strain-hardening fibre reinforced cementitious composites, Materials and structure, 28, pp.586-595 https://doi.org/10.1007/BF02473191
  9. Naaman, A. E., and Reinhardt, H. W., 1995. High Performance Fiber Reinforced Cement Composites 2 (HPERCC2), E&Fn Spon
  10. Hong, S. H., Han, S. H., Yun, K. K., 2006. A Case Study for Deterioration due to Alkali-Silica Reaction in the Cement Concrete Pavement, Journal of Korea Concrete Institute, Vol. 18, No. 3, pp.355-360 https://doi.org/10.4334/JKCI.2006.18.3.355
  11. Yang, K. H., O, S. J., 2008. Effect of Volume Fraction and Length of Fiber on the Mechanical Properties of Fiber Reinforced Concrete, Journal of korea Institute of Building Construction, Vol. 8, No. 1, pp.43-48 https://doi.org/10.5345/JKIC.2008.8.1.043
  12. Han, C. G., Yoon, G. W., Han. M. C., Shin. H. S., 2007. A Fundamental Study of the Nylon Fiber Concrete, Journal of Archtectural Institute of Korea, Vol. 23, No. 4, pp.95-102