DOI QR코드

DOI QR Code

Basic Study on the Assembly Process Design of Curtain-wall System for Minimization of Carbon Emission

  • Yi, June-Seong (Department of Architectural Engineering, Ewha Womans University)
  • 투고 : 2012.09.14
  • 심사 : 2012.10.09
  • 발행 : 2012.12.20

초록

With recent attempts to improve quality and productivity, the prefabrication manufacturing system has been occupying an increasing share of the construction area. To minimize site work, material is more frequently being produced and partially assembled at a plant, and then installed at a site. For this reason, the production process is being divided and the materials are being delivered to the site after passing through multiple plants. With these changes in the production process, the materials delivery plan is becoming an important management point. In particular, as road transportation using trucks has a 71 percent share of the domestic transportation market, selecting the proper transportation path is important when delivering materials and equipment to a site. But the management system at the project design phase to calculate the delivery cost by considering the production process of the pre-fab material and the $CO_2$ emission at the material delivery phase is currently lacking. This study suggests a process design model for assembly production of the pre-fab material and transportation logistics based on carbon emission. The suggested model can be helpful to optimize the location of the intermediate plant. It is expected to be utilized as a basic model at the project plan and design phase when subcontractors make decisions on items such as materials procurement, selecting the production method, and choosing the location of the assembly plant.

키워드

참고문헌

  1. Williamson OE. The Economic Institutions of Capitalism, 2nd ed. New York (NY): A Division of Macmillan Inc.; 1985. p.1-2
  2. Jeong YS. A Study on Prediction Model of Carbon Dioxide Emission in Life Cycle for Residential Buildings. [dissertation]. Seoul(Korea): University of Seoul; 2010. 65 p.
  3. Allison A, Bryan B. Prefab, 1st ed. Layton (UT): Gibbs Smith Publisher; 2002. p.12-13.
  4. Kim YS. A Development of Automated Life-Cycle Management System for Curtain Wall Process for High-Rise Buildings based on Supply Chain Management. Seoul (Korea): Korea Institute of Construction Engineering and Management; 2006. p. 123-6.
  5. Park YS, Choi HR, Kim HS, Park NK, Cho JH, Kang MH. A Decision Support System for the Third-party Logistics Optimal Transportation Network Planning. Proceeding of the Korea Society of Management Information Systems; 2006 June 16; Seoul (Korea). Seoul (Korea): KICEM; 2006. p. 965-74.
  6. Figueiredo JN, Mayerle SF. Designing Minimum-cost Recycling Collection Networks with Required Throughput. Transportation Research. 2008 September;44(5):731-52. https://doi.org/10.1016/j.tre.2007.04.002
  7. Erkut E, Neuman S. Analytical Models for Locating Undesirable Facilities. European Journal of Operational Research 1989 June;40(3):275-91. https://doi.org/10.1016/0377-2217(89)90420-7
  8. Kim EM. A Study of Physical Distribution Channel Choice Modeling Focused on Domestic Goods [master's thesis]. Seoul (Korea): the University of Seoul; 2009. p. 72.
  9. Lee JS. A study on the Impact of Partnership with Contractors on the Project Performance in the Outsourcing of the Construction Industry [master's thesis]. Seoul (Korea): Yonsei University; 1999. p. 26-7.
  10. Jang MH. Development of a Materials Management System Considering Construction Supply Chain Management. Journal of the Korea Institute of Building Construction 2009 October;9(5):89-95. https://doi.org/10.5345/JKIC.2009.9.5.087
  11. Agapiou A, Clausen LE, Norman G, Flanagan R. The role of Logistics in the Materials Flow Control Process. Construction Management and Economics. 1998 March;16(2):131-7. https://doi.org/10.1080/014461998372420
  12. Faulin J, Ubeda S, Lera F, Pintor JM, San Miguel J. Optimization of Road Freight Transportation in Spain Taking Into Account Environmental Criteria [Internet]. 2007[cited 2012 Oct 10]. Available from: http://www.cnc-logistica.org/congreso-cnc/documentos/100
  13. IPCC. Revised Guidelines for National Greenhouse Gas Inventories(IPCC2006), IGES, Japan; 2006.
  14. Shin TH, Chin SY, Yoon SW, Kwon SW, Kim YS. A SOA-based Application Model for Building Intelligent Construction Supply Chain Management Framework. Proceeding of KICEM Annual Conference; 2008 Novemeber 7-8; Seoul (Korea). Seoul (Korea): KICEM; 2008. p. 735-9.
  15. Ahn BJ, Yang JY, Baik JK, Kim JJ. Developing a Transportation and Procurement System for Curtain-Wall Materials focused on JIT Management. Journal of the Archtectural Institute of Korea 2003 August;19(8):153-62.
  16. Lee SH. A Study on Improvement of High-rise Curtain Wall Life-cycle Process Using Value Stream Mapping. [master's thesis]. Seoul (Korea): KwangWoon University; 2006. p. 83-91.