DOI QR코드

DOI QR Code

BLT 방정식과 수치해석 기법을 이용한 전송 선로의 커플링 효과 분석

Analysis of Coupling Effects in Transmission Lines Using the BLT Equation and Numerical Methods

  • 투고 : 2011.11.04
  • 심사 : 2011.12.23
  • 발행 : 2012.01.01

초록

The electromagnetic topology and the BLT equation has been used as useful techniques to analyze coupling effects of huge devices. But in the case of systems including complex parts, applying the BLT equation can be difficult to manifest the complex parts with analytic solutions. To resolve this problem, a numerical method can be used to parts of the whole system in advance. In this paper, a microstrip line filter is analyzed using the BLT equation combined with numerical solutions. Consequently, achieved graphs from the BLT equation show good agreements with graphs obtained using a numerical method only.

키워드

참고문헌

  1. M. Backstrom and J. Loren, "Microwave coupling into a generic object. Properties of measured angular receiving pattern and its significance for testing", IEEE Int. Zurich Symposium on EMC, vol. 2, pp. 1227-1232, 2001.
  2. I. Junqua, L. Guibert, and J. -P. Parmantier, "Assessment of high-frequency coupling in a generic object by the power balance method", IEEE Int. Zurich Symposium on EMC Zurich, pp. 397-400, 2007.
  3. F. M. Tesche and C. M. Butler, "On the addition of EM field propagation and coupling effects in the BLT equation," Interaction Note, no. 588, December 2003.
  4. F. M. Tesche, J. Keen and C. M. Butler, "Example of the use of the BLT equation for EM field propagation and coupling calculations," Interaction Note, no. 591, August 2004.
  5. F. M. Tesche, "Development and use of the BLT equation in the time domain as applied to a coaxial cable," IEEE Trans. Electromagn. Compat., vol. 49, no. 1, pp. 3-11, February 2007. https://doi.org/10.1109/TEMC.2006.888184
  6. Ying Li, Gunyan Ni, Jianshu Luo, Gaosheng Li and Zipeng Zhao, "The terminal responses of the two-wire line in cavities with multi-apertures based on topological decomposition and method of moments," IEEE Int. Symposium on Antennas Propagation and EM Theory (ISAPE), pp. 888-891, 2010.
  7. Ying Li, Jianshu Luo, Guyan Ni and Jiyuan Shi, "Electromagnetic topology analysis to coupling wires enclosed in cavities with apertures," Mathematical Problems in Engineering, vol. 2010, article ID 209591, pp. 1-11, 2010.
  8. 강원준, 이비오, 문상곤, 김준호, 정용식, "BLT 방정식을 이용하여 사각 aperture 사이를 통과한 고출력 전자파가 공진기 내부에 미치는 영향에 관한 연구," 대한전기학회 하계학술대회 논문집, pp. 1539-1540, 2010년 7월.
  9. 강원준, 문상곤, 김준호, 천창율, 정용식, "BLT 방정식을 이용한 고출력 전자파가 고주파 회로에 미치는 영향에 관한 연구," 한국통신학회논문지, 제35권, 10호, pp. 1520-1525, 2010년 10월.
  10. 이윤주, "BLT 방정식을 이용한 고출력 전자파 펄스의 효과도 연구," 광운대학교 석사학위논문, 2007년 8월.
  11. 박윤미, 황세훈, 이정엽, 정현교, "Electromagnetic Topology(EMT) 기법을 이용한 Printed Circuit Boards(PCBs) 기판 해석," 2006년도 한국정보통신설비학회 하계학술대회 논문집, pp. 170-174, 2006년 8월.
  12. 황세훈, 박윤미, 정현교, "BLT 방정식을 이용한 RF 검파 회로 해석," 전기학회논문지, 제56권, 9호, pp. 1643-1647, 2007년 9월.
  13. 두진경, 현세영, 안재운, 황선묵, 육종관, "수치해석 기법과 BLT 방정식을 이용한 커플링 효과 분석," 한국전자파학회 종합학술발표회, vol. 21, no. 1, 2011년 11월.

피인용 문헌

  1. Analysis of Coupling Effects to PCBs Inside Waveguide Using the Modified BLT Equation and Full-Wave Analysis vol.61, pp.10, 2013, https://doi.org/10.1109/TMTT.2013.2277994