References
- Players, "Organic Electronics Forecasts 2005-2015", IDTec (2005).
- R. H. Reuss, B. R. Chalamala, A. Moussessian, M. G. Kane, A. Kumar, D. C. Zhang, J. A. Rogers, M. Hatalis, D. Temple, G. Moddel, B. J. Eliasson, M. J. Estes, J. Kunze, E. S. Handy, E. S. Harmon, D. B. Salzman, J. M. Woodall, M. A. Alam, J. Y. Murthy, S. C. Jacobsen, M. Olivier, D. Markus, P. M. Campbell, and E. Snow, "Macroelectronics: Perspectives on Technology and Applications", Proc. IEEE, 93(7), 1239 (2005). https://doi.org/10.1109/JPROC.2005.851237
- W. S. Wong and A. Salleo, Flexible Electronics, 1st Ed, pp.4- 5, Springer (2009).
- J. W. Yoon, W. C. Moon, and S. B. Jung, "Core Technology of electronic Packaging", Int. J. Kor. Weld. Soc., 23(2), 116 (2005).
- S. K. Kang, "Lead (Pb)-Free Solders for Electronic Packaging", J. Electron. Mater., 23(8), 701 (1994). https://doi.org/10.1007/BF02651362
- M. Abtew and G. Selvaduray, "Lead-free Solders in Microelectronics", Mater. Sci. and Eng. R., 27(5-6), 95 (2000). https://doi.org/10.1016/S0927-796X(00)00010-3
- A. Sharif and Y. C. Chan, "Comparative Study of Interfacial Reactions of Sn-Ag-Cu and Sn-Ag Solders on Cu Pads during Reflow Soldering", J. Electron. Mater., 34(1), 46 (2005). https://doi.org/10.1007/s11664-005-0179-1
- J. Shen and Y. C .Chan, "Research advances in nano composite solders", Microelectron. Reliab., 49(3), 223 (2009). https://doi.org/10.1016/j.microrel.2008.10.004
- M. Y .Kim, S .K .Lim and T. S. Oh, "Thermal Cycling and High Temperature storage Reliabilities of the Flip Chip Hoints Processed Using Cu pillar Bumps", J. Microelectron. Packag. Soc, 17(3), 27 (2010).
- J. Y .Choi, M. Y .Kim, S .K .Kim, and T. S. Oh, "Flip Chip Process for RF Packages Using Joints Structures of Cu and Sn bumps", J. Microelectron. Packag. Soc, 16(3), 67 (2009).
- W. M. Ki, "Joint Microstructures and Reliability of the Flexible Electronic Module with Flip Bonding Paramtetes(in Kor.)", in MS thesis, pp. 88, University of Science and Technology, Daejeon (2012).
Cited by
- Novel Low-Volume Solder-on-Pad Process for Fine Pitch Cu Pillar Bump Interconnection vol.22, pp.2, 2015, https://doi.org/10.6117/kmeps.2015.22.2.055
- 수치해석을 이용한 구리기둥 범프 플립칩 패키지의 열압착 접합 공정 시 발생하는 휨 연구 vol.41, pp.6, 2012, https://doi.org/10.3795/ksme-a.2017.41.6.443
- 자동차 전장을 위한 플렉시블 기판 무연 솔더 접합부 특성 vol.25, pp.2, 2018, https://doi.org/10.6117/kmeps.2018.25.2.025
- Growth Behavior of Intermetallic Compounds in Various Solder Joints Induced by Electromigration vol.39, pp.1, 2012, https://doi.org/10.5781/jwj.2021.39.1.11