대한토목학회논문집 (KSCE Journal of Civil and Environmental Engineering Research)

  • 제32권3C호
  • /
  • Pages.105-111
  • /
  • 2012
  • /
  • 1015-6348(pISSN)
  • /
  • 2799-9629(eISSN)
대한토목학회 (Korean Society of Civil Engeneers)
권호 표지
DOI QR코드

DOI QR Code

점성토 지반에 설치된 Tripod 버켓기초의 지지거동 분석

Analysis of the Bearing Behavior of a Tripod Bucket Installed in Clay

  • 김성렬 (동아대학교 토목공학과) ;
  • 정재욱 (우리이엔지건축사사무실) ;
  • 오명학 (한국해양연구원 연안개발에너지연구부) ;
  • 권오순 (한국해양연구원 연안개발에너지연구부)
  • 투고 : 2012.02.22
  • 심사 : 2012.04.12
  • 발행 : 2012.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

해상 풍력발전기의 기초로 사용되는 버켓기초에는 수평하중과 모멘트가 크게 작용한다. 그러므로, 수평하중과 모멘트에 대한 지지력을 증가시키기 위해 3개의 단일 버켓기초를 묶은 Tripod 버켓기초가 적용되고 있다. 본 연구는 ABAQUS(2010) 해석을 수행하여 점토 지반에 근입된 Tripod 기초의 무리효과와 지지력을 분석하였다. 변수연구를 위해 버켓간 간격비 S/D(S=버켓과 타워중심간의 거리, D=버켓 직경)와 근입깊이비 L/D(L=버켓의 지반 근입깊이)를 변화시키며 해석을 수행하였다. 구성모델은 정규압밀 점토지반에 대해 Tresca 항복기준을 적용한 탄성-완전 소성 모델, 그리고 버켓기초에 대해 탄성모델을 적용하였다. 하중조건은 절점의 변위를 증가시키는 방법으로 연직, 수평 그리고 모멘트 하중을 재하하였다. 해석결과로부터, 단일 버켓기초와 Tripod 기초의 지지거동과 지지력을 비교한 후 단일 버켓의 지지력을 이용하여 Tripod 기초의 지지력을 산정하는 방법을 제안하였다.

Bucket foundations, which are used in the foundations of offshore wind turbines, should be able to withstand large amounts of horizontal and moment loads. Tripod bucket foundation, which combines three single buckets, has been used to increase horizontal and moment capacities. This study performed numerical analysis using ABAQUS (2010), to analyze the group effect and the bearing capacity of a tripod bucket in clay. Parametric studies were performed varying the bucket spacing ratio S/D (S=spacing between the centers of the bucket and the tower; D=diameter of the bucket) and depth ratio L/D (L=embedded length of skirt). The applied constitutive models were a linear elastic perfectly plastic model with Tresca yield criteria for normally consolidated clay and an elastic model for buckets. Loading in the vertical, horizontal, and moment directions was simulated with an increase in each movement at a reference point. The bearing behavior and the capacities of a single and a tripod bucket were compared. Capacity evaluation method of the tripod bucket was suggested using the capacity of a single bucket.

키워드

참고문헌

  1. 이치흥, 정재욱, 김성렬(2011) 수치해석을 이용한 점성토 지반에 설치된 버켓기초의 지지력 분석, 한국지반공학회 논문집, 한국지반공학회, 제27권 제10호, pp. 13-23.
  2. ABAQUS (2010) User's Manual. Version 6.10-1.
  3. Bransby, M. F. and Randolph, M. F. (1997) Shallow foundation sunject to combined loadings, Proc. 9th Int. Conf. Comput. Methods Adv. Geomech. Wuhan 3, pp. 1947-1952.
  4. Bransby, M. F. and Yun, G. (2009) The undrained capacity of skirted strip foundation under combined loading, Gotechnique, Vol. 59, No. 2, pp. 115-125. https://doi.org/10.1680/geot.2007.00098
  5. DNV (2007) Offhore Standard DNV-OS-J101, Design of Offshore Wind Turbine Structures.
  6. Gourvenec, S. and Randolph, M. F.(2003) Effect of strength nonhomogeneity on the shape of failure envelopes for combined loading of strip and circular foundations on clay, Gotechnique, Vol. 53, No. 6, pp. 575-586. https://doi.org/10.1680/geot.2003.53.6.575
  7. Gourvenec, S. (2008) Effect of embedment on the undrained capacity of shallow foundations under general loading, Gotechnique, Vol. 58, No. 3, pp. 177-185. https://doi.org/10.1680/geot.2008.58.3.177
  8. Mansur, C. I. and Kaufman, J. M. (1956) Pile tests, low-sill structure, Old River, Louisiana, Journal of Soil Mechanics and Foundation Division, Vol. 82, No. SM5, pp. 1-33.
  9. Mosallanezhad, M., Hataf, N., and Ghahramani, A. (2008) Experimental study of bearing capacity of granular soils, reinforced with innovative grid-anchor system, Geotechnical and Geological Engineering, Vol. 26, pp. 299-312. https://doi.org/10.1007/s10706-007-9166-z
  10. Senders, M. (2005) Tripods with suction caissons as foundations for offshore wind turbines on sand, Frontiers in Offshore Geotechnics: ISFOG $2005{^{\circ}(C)}$Gourvenec & Cassidy (eds). Taylor & Francis Group, London, ISBN 0 415 39063 X, pp. 397-403.
  11. Taiebat, H. A. and Carter, J. P. (2000) Numerical studies of the bearing capacity of shallow foundations on cohesive soil subjected to combined loading, Geotechnique, Vol. 50, No. 4, pp. 409-418. https://doi.org/10.1680/geot.2000.50.4.409
  12. Tran, M. N. and Randolph, M. F. (2008) Variation of suction pressure during caisson installation in sand, Geotechnique, Vol. 58, No. 1, pp. 1-11. https://doi.org/10.1680/geot.2008.58.1.1
  13. Yun, G. and Bransby, M. F. (2007a) The undrained vertical bearing capacity of skirted foundations, Soils and Foundations, Vol. 47, No. 3, pp. 493-505. https://doi.org/10.3208/sandf.47.493
  14. Yun, G. and Bransby, M. F. (2007b) The horizontal-moment capacity of embedded foundations in undrained soil, Canadian Geotechnical Journal, Vol. 44, No. 4, pp.409-424. https://doi.org/10.1139/t06-126
  15. Zhan, Y. G. and Liu, F. C. (2010) Numerical analysis of bearing capacity of suction bucket foundation for offshore wind turbines, Electronic Journal of Geotechnical Engineering, Vol. 15, pp. 633-644.