DOI QR코드

DOI QR Code

래버린스 위어를 이용한 침사지 내 침전효율 개선

Improvement of Sedimentation Rate in the Settling Basin by Labyrinth Weir

  • 조훈식 (홍익대학교 공과대학 토목공학과) ;
  • 여창건 (서울시정개발연구원 환경안전연구실) ;
  • 임장혁 (현대건설(주) 기술개발원 에코에너지부) ;
  • 이승오 (홍익대학교 공과대학 토목공학과)
  • 투고 : 2011.02.08
  • 심사 : 2012.03.09
  • 발행 : 2012.06.30

초록

본 연구에서는 기존의 침사지 내부 수공구조물(격벽)로 사용되고 있는 둔턱을 대체하여 일반형 사다리꼴 래버린스 위어 (generic labyrinth weir)와 변형된 형태인 경사형 마루 래버린스 위어(inclined crest labyrinth weir)를 제시하였으며, 래버린스 위어 적용시 발생하는 수리학적 흐름특성을 이용하여 침사지에서 침전율을 개선하고자 하였다. 본 연구에서는 전수두비 (headwater ratio) $H_t/P$, 와 확폭비(magnification ratio) L/W, 그리고 총 마루길이 당 유입유량 $q_L$을 침전효율의 주요 분석지표로 제시하였으며, 기존의 침사지 형상과 래버린스 위어를 적용한 래버린스 침사지 형상을 제작하여 실험을 수행하였다. 실험결과 래버린스 위어를 적용한 침사지는 확폭비 변화에 따른 전수두비의 변동이 침전효율(%)에 크게 영향을 미치는 것으로 분석되었으며, 래버린스 위어 반복배열수(N)가 2~4개 일 때 침전효율이 개선되는 것으로 분석되었다. 또한 회기분석을 통해 침전효율이 개선되는 유입조건 및 형상은 총 마루길이 당 유입유량이 $q_L{\geq}3.5cm^2/s$인 조건과 확폭비가 $L/W{\leq}3.5$ 인 경우 로 나타났으며, 이러한 침전효율이 개선되는 구간을 도표상으로 표현 및 분석하였다. 본 연구에서 제시한 분석지표를 통해 오탁수 유입량 및 침사지 소요면적 등 설계조건에 따른 적합한 침전효율을 갖는 구조적으로 최적화된 래버린스 침사지의 기초 설계에 활용될 수 있을 것이다.

In this study, we proposed modified settling basins transformed by substituting the downstream sill for low head weirs such as generic labyrinth weir and inclined crest labyrinth weir worked as internal baffles. Laboratory experiments were carried out to understand hydraulic characteristics inside of the settling basin to improve the efficiency of sedimentation rate. For a quantitative analysis, we suggested the headwater ratio($H_t/P$), the magnification ratio(L/W) and the inflow rate per total crest length($q_L$) as primary analysis indexes for sedimentation efficiency. Six different types of settling basin were used for labscaled pilot tests by distinguishing with internal structures. Based on results, the variation of headwater ratio with the change of magnification ratio would highly affect the deposition efficiency(%) and it was improved under specific condition that repeating arrange number(N) of labyrinth weir was between 2 and 4. Also, the regression analysis showed that initial condition and shape for improving sedimentation efficiency were plotted on the graph for both $q_L{\geq}3.5cm^2/s$ and $L/W{\leq}3.5$. It would be expected that the geometrically optimized labyrinth settling basin could be designed with proper deposition efficiency for inflow rates of influent and required area of settling basin utilizing the proposed analysis index in this study.

키워드

참고문헌

  1. 김진섭, 정성희, 김종범, 김재호(2007) 99mTc 추적자를 이용한 하수처리 시설 내 침전조의 정류벽 설치 유무에 따른 유체거동 변화측정. 방사선방어학회지, 대한방사선방어학회, 제32 권 제3호, pp. 117-122.
  2. 김혜숙, 신미수, 이상일, 장동순(2001) 부유고형물질 제거를 위한 침전조 설계 연구. 2001 한국폐기물자원순환학회 춘계학술연구회 발표논문집, 한국폐기물자원순환학회, pp. 245-249.
  3. 박호상(2010) 경사형 마루 래버린스 위어의 수리학적 특성, 박사학위논문, 홍익대학교.
  4. 신현철(2001) 고속응집부상분리방법에 관한 연구, 석사학위논문, 고려대학교.
  5. 안효원, 김정현, 권순범, 박노석(2004) 고탁도 원수대책을 위한 소규모 정수 시스템 개발, 한국수자원공사.
  6. 유원일(2010) '4대강 사업' 현장조사 보고서, 시민환경연구소.
  7. 유재영(2000) 규조토와 그 응용, 한국광물학회..산업광물은행. 광물과 산업, 제13권 제1호, pp. 39-50.
  8. 이채영, 박승용, 유황룡, 강윤구, 박창욱, 배병욱(2008) 준설토 투기장의 부유토사 유출 저감방안, 2008 한국지반환경공학회 학술발표회논문집, 한국지반환경공학회, pp. 343-346.
  9. 임장혁(2008) Labyrinth 위어 형상에 따른 유량계수 산정, 박사학위논문, 홍익대학교.
  10. Tamayol, A., Firoozabadi, B., and Ahmadi, G. (2008) Effects of inlet position and baffle configuration on hydr. performance of primary settling tanks, J. Hydraul. Eng., Vol. 134, No. 7, pp. 1004-1009. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:7(1004)
  11. Falvey, H.T. (2003) Hydraulic Design of Labyrinth Weirs, ASCE PRESS.
  12. Hay, N. and Taylor, G. (1970) Performance and design of labyrinth weirs, J. Hydraul. Eng., Vol. 96, No. 11, pp. 2337-2357.
  13. Jamshidnia Hamidreza and Takeda Yasushi, (2009) UVP Measurement of Flow around a Baffle in a Rectangular Open Channel, Journal of Fluid Science and Technology, Vol. 4, No. 3, pp. 758-774. https://doi.org/10.1299/jfst.4.758
  14. Lee, S.O, Sturm, T.W., Cho, Y.S., and Kim, C.W. (2007) ExPerimental And Numerical Analysis Of Turbulent Flow through an oil/grit separator, Proceedings of International Association of Hydraulic Engineering and Research (IAHR), 32nd Congress, Venice, Italy, July 2007.
  15. Lux, F. and Hinchliff, D.L. (1985) Design and construction of labyrinth spillways, 15th Congress ICOLD, Lausanne, Switzerland, IV(Q59-R15), pp. 249-274.
  16. Rossini, M., Garrido, J.G., and Galluzzo, M. (1999) Optimization of the coagulation-flocculation treatment : influence of rapid mix parameters, Water Res., Vol. 33, No. 8, pp. 1817-1826. https://doi.org/10.1016/S0043-1354(98)00367-4
  17. Taylor, G. (1968) The performance of labyrinth weirs. PhD thesis, University of Notingham, Notingham, England.
  18. Woo, H.S., Julien, P.Y., and Richardson, E.V. (1986) Wash load and fine sediment load, J. Hydraul. Eng., Vol. 112, No. 6, pp. 541- 545. https://doi.org/10.1061/(ASCE)0733-9429(1986)112:6(541)