DOI QR코드

DOI QR Code

강섬유 보강 초고성능 콘크리트 보의 전단 거동에 관한 실험 연구

An Experimental Study on Shear Behavior of Steel Fiber-Reinforced Ultra High Performance Concrete Beams

  • 양인환 (군산대학교 토목공학과) ;
  • 조창빈 (한국건설기술연구원 인프라구조연구실) ;
  • 이정우 (한국건설기술연구원 인프라구조연구실) ;
  • 김병석 (한국건설기술연구원 SOC성능연구소)
  • 투고 : 2011.03.10
  • 심사 : 2011.11.16
  • 발행 : 2012.02.29

초록

이 연구에서는 강섬유 보강 초고성능 콘크리트 보의 전단거동를 파악하기 위한 실험연구를 수행하였다. I-형 단면을 갖는 단순지지 6개의 보 부재에 대해 3점하중 정적재하실험을 수행하여 전단 거동 특성을 분석하였다. 부재의 실험변수는 강섬유 혼입량과 전단지간-유효깊이 비이다. 강섬유 혼입량은 1.0, 1.5 및 2.0%로 변화하였고, 전단지간-유효깊이 비는 2.5 및 3.4로 변화하였다. 실험결과는 강섬유량이 증가할수록 극한전단강도가 증가하고, 전단지간-유효깊이 비가 증가할수록 극한전단강도가 감소하는 것을 나타낸다. 실험결과를 이용하여 기존 강섬유 보강 콘크리트 보의 전단강도 예측식의 적합성을 평가하고자 하였다. 전단강도 실험값을 기존의 제안식에 의한 전단강도 예측값과 비교하였으며, 비교결과는 예측식의 유효성을 나타내고 있다. AFGC와 JSCE의 제안식에 의한 전단강도 예측 평균값이 실험값에 거의 근접하고 있으며, 예측식 중에서 이들 제안식의 정확도가 가장 높은 것으로 나타난다.

Experimental investigation on the structural behavior of steel fiber-reinforced ultra high performance concrete (UHPC) beams subjected to shear are presented. Six tests carried out on simply supported I-beams under concentrated loads are presented. The parameters varied were the volume fraction of the fibers (1.0, 1.5 and 2.0%) and shear span-effective depth ratio (2.5, 3.4). The test results indicated that ultimate shear strength increased with increasing fiber volume, and that ultimate shear strength decreased with increasing shear span-effective depth ratio. In addition, applicability of predictive equations for evaluating the ultimate shear strength of steel fiber-reinforced UHPC beams are estimated based on the test results. The comparison between computed values and the experimentally observed values are shown to validate the proposed theoretical equations. It is found that predictions by using AFGC and JSCE recommendations provide the most accurate estimates of shear strength of steel fiber-reinforced UHPC beams.

키워드

참고문헌

  1. 갈경완, 김강수, 이득행, 황진하, 오영훈(2010) 강섬유로 보강된 콘크리트 보의 전단강도에 관한 실험적 연구, 한국구조물진단학회논문집, 한국구조물진단학회, 제14권 제3호, pp. 160-170.
  2. 김성욱, 강수태, 한상묵(2006) 초고성능 시멘트 복합재의 특성 및 활용현황, 콘크리트학회지, 한국콘크리트학회, 제18권 1호, pp. 16-21.
  3. 양인환, 조창빈(2010) 강섬유 보강 초고강도 콘크리트 보의 휨 강도 예측기법의 제안, 대한토목학회논문집, 대한토목학회, 제30권 제3A호, pp. 317-328.
  4. 양인환, 조창빈, 김병석(2011) 인장연화거동을 고려한 강섬유 보강 초고성능 콘크리트 보의 모멘트-곡률 해석, 한국전산구조공학회논문집, 한국전산구조공학회, 제24권 제3호, pp. 237-248.
  5. 오영훈, 김정해(2008) 전단보강이 없는 강섬유보강 콘크리트 휨 부재의 휨 및 전단강도의 평가, 콘크리트학회논문집, 한국콘크리트학회, 제20권 2호, pp. 257-267
  6. Al-Tán, S.A. and Al-Feel, J.R. (1990) Evaluation of shear strength of fibre-reinforced concrete beams, Cement & Concrete Composites, Vol. 12, No. 2, pp. 87-94. https://doi.org/10.1016/0958-9465(90)90045-Y
  7. Ashour, S.A. Hasanain, G.S., and Wafa, F.F. (1992) Shear behavior of high-strength fiber reinforced concrete beams, ACI Structural Journal, Vol. 89, No. 2, pp. 176-184.
  8. Association Francaise du Genil Civil (AFGC) (2002) Betons fibres a ultra-hautes performances.
  9. Casanova, P., Pierre, R., and Schaller, I. (1997) Can steel fibers replace transverse reinforcements in reinforced concrete beams? ACI Structural Journal, Vol. 94, No. 5, pp. 341-354.
  10. Elliot, K.S., Peaston, C.H., and Paine, K.A. (2002a) Experimental and theoretical investigation of the shear resistance of steel fibre reinforced prestressed concrete X-beams - Part I : Experimental work, Materials and Structures, Vol. 35, No. 253, pp. 519-527. https://doi.org/10.1617/13808
  11. Elliot, K.S., Peaston, C.H. and Paine, K.A. (2002b) Experimental and theoretical investigation of the shear resistance of steel fibre reinforced prestressed concrete X-beams - Part II : Theoretical analysis and comparison with experiments, Materials and Structures, Vol. 35, No. 253, pp. 528-535. https://doi.org/10.1617/13809
  12. Federal Highway Administration (FHWA) (2006) Material property characterization of ultra-high performance concrete, U.S Department Transportation.
  13. Japan Society of Civil Engineers (JSCE) (2004) Recommendations for design and construction of ultra high-strength fiber-reinforced concrete structures, -draft.
  14. Kwak, Y.K., Eberhard, M.O., Kim. W.S., and Kim, J. (2002) Shear strength of steel fiber-reinforced concrete beams without stirrups, ACI Structural Journal, Vol. 99, No. 4, pp. 530-538.
  15. Lim, T.Y., Paramasivam P., and Lee, S.L. (1987) Analytical model for tensile behavior of steel-fiber concrete, ACI Materials Journal, Vol. 84, No. 4, pp. 286-298.
  16. Mansur, M.A. Ong, K.C.G., and Paramasivam P. (1986) Shear strength of fibrous concrete beams without stirrups, Journal of Structural Engineering, ASCE, Vol. 112, No. 9, pp. 2066-2079. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:9(2066)
  17. Meda, A., Minelli, F., Plizzari, G.A., and Riva, P. (2005) Shear behavior of steel fibre reinforced concrete beams, Materials and Structures, Vol. 38, No. 277, pp. 343-351. https://doi.org/10.1617/14112
  18. Narayanan, R. and Darwish, I.Y.S. (1987) Use of steel fibers as shear reinforcement, ACI Structural Journal, Vol. 84, No. 3, pp. 216-227.
  19. Sharma, A.K. (1986) Shear strength of steel fiber reinforced concrete beams, ACI Journal, Vol. 83, No. 4, pp. 624-628.
  20. Soroushian, P. and Lee, C. (1990) Distribution and orientation of fibers in steel fibre reinforced concrete, ACI Materials Journal, Vol. 87, No. 5, pp.433-439.
  21. Thomas, J. and Ramaswamy (2006) Shear strength of prestressed concrete T-beams with steel fibers over partial/full depth, ACI Structural Journal, Vol. 103, No. 3, pp. 427-435.
  22. Van Mier, J.G.M. and Timmers, G. (1991) Shear fracture in slurry infiltrated fiber concrete (SIFCON), Proceedings of 1st RILEM/ ACI Workshop on HPFRCC, Germany, Mainz, pp. 253-265.
  23. Yang, I.H., Joh, C., and Kim, B.S. (2010), Structural behavior of ultra high performance concrete beams subjected to bending, Engineering Structures, Vol. 32, No. 11, pp. 547-555. https://doi.org/10.1016/j.engstruct.2009.10.015
  24. Yang, I.H., Joh, C., and Kim, B.S. (2011), Flexural strength of large scale ultra high performance concrete prestressed T-beams, Canadian Journal of Civil Engineers, Vol. 38, No. 11, pp. 1185-1195. https://doi.org/10.1139/l11-078
  25. Zsutty, T. (1971) Shear strength prediction for separate categories of simple beam tests, ACI Journal, Vol. 68, No. 2, pp. 138-143.