References
-
James, R., "Clean Coal technology Status:
$CO_{2}$ Capture and Storage," Technology Briefing for Colorado Rural Electric Association, EPRI(2007). - Ryu, H. J., "Selection of Process Configuration and Operating Conditions for SEWGS System," Trans. of the Korean Hydrogen and New Energy Society, 20(2), 168-178(2009).
- Ryu, H. J., Hyun, J. S., Kim, H. and Hwang, T. S., "Reaction Characteristics of WGS Catalyst with Fraction of Catalyst in a Batch Type Fluidized Bed Reactor," Trans. of the Korean Hydrogen and New Energy Society, 22(4), 465-473(2011).
- Maurstad, O., "An Overview of Coal Based Integrated Gasification Combined Cycle (IGCC) Technology," MIT report, Publication No. LFEE 2005-002 WP, 1-43(2008).
- IEA report, "Prospects for Hydrogen and Fuel Cells," IEA Books, 49-55(2005).
- Lee, J. B., Eom, T. H., Choi, D. H., Park, K. W., Ryu. J., Baek, J. I., Ryu, C. K. and Ryu, H. J., "Study on Hybrid Materials of WGS Cataylst and CO2 Sorbent for SEWGS Process," International Symposium on Low Carbon & Renewable Energy Technology, Lotte Hotel, Jeju, Korea, 372(2010).
-
Lee, J. M., Min, Y. J., Lee, K. B., Jeon, S. G., Na, J. G. and Ryu, H. J., "Enhancement of
$CO_{2}$ Sorption Uptake on Hydrotalcite by Impregnation with$K_{2}CO_{3}$ ," Langmuir, 26(24), 18788-18797(2010). https://doi.org/10.1021/la102974s - Eric, D., Stemphane, W., Paul C. and Rudd, B., "Sour SEWGS Applicaion in IGCC," TCCS-6, Trondheim(2011).
- Beavis, R., "CACHET: Outline of Project Objectives and Base Case," CACHET Public Workshop, IFP, Lyon(2008).
-
Ryu, H. J., Lee, S. Y., Park, Y. C. and Jo, S. H., "Selection of WGS Catalyst and
$CO_{2}$ Absorbent for Pre-combustion$CO_{2}$ Capture," Fifth International Conference on Clean Coal Technologies, May 8-12, Zaragoza, Spain, available in http://www.cct2011.org(2011). -
Ryu, H. J., Yi, C. K., Park, Y. C. and Jo, S. H., "SEWGS Reaction with Mixture of WGS Catalyst and
$CO_{2}$ Absorbent in a Fluidized Bed Reactor," The 13th Korea-Japan Symposium on Catalysis, May 23-25, Seogwipo, Jeju Island, Korea, 230(2011).
Cited by
- Capture vol.24, pp.5, 2013, https://doi.org/10.7316/KHNES.2013.24.5.428
- Attrition Characteristics of WGS Catalysts for SEWGS System vol.25, pp.2, 2014, https://doi.org/10.7316/KHNES.2014.25.2.122
- Effect of Pre-treatment Method on Reactivity of WGS Catalyst for SEWGS System vol.25, pp.4, 2014, https://doi.org/10.7316/KHNES.2014.25.4.355
- Comparison of Solid Circulation Characteristics with Change of Lower Loop Seal Geometry in a Circulating Fluidized Bed vol.52, pp.4, 2014, https://doi.org/10.9713/kcer.2014.52.4.522
- SEWGS 공정을 위한 유동층 반응기에서 내부 삽입물의 모양 및 WGS 촉매의 형상이 CO 전환율에 미치는 영향 vol.24, pp.2, 2012, https://doi.org/10.7316/khnes.2013.24.2.150
- SEWGS 공정을 위한 유동층 반응기에서 내부 삽입물의 모양이 WGS 촉매의 CO 전환율에 미치는 영향 vol.24, pp.6, 2012, https://doi.org/10.7316/khnes.2013.24.6.535
- 연소 전 이산화탄소 회수를 위한 흡수제 및 촉매의 수력학적 특성 vol.19, pp.4, 2013, https://doi.org/10.7464/ksct.2013.19.4.437
- 내부 삽입물을 적용한 유동층 반응기에서 WGS 촉매의 CO 전화율에 미치는 조업변수들의 영향 vol.25, pp.2, 2012, https://doi.org/10.7316/khnes.2014.25.2.209
- High-Temperature and High-Pressure Particle Attrition Characteristics of Dry Sorbents for Pre-Combustion CO2 Capture by a Gas Jet in a Bubbling Fluidized Bed vol.51, pp.8, 2012, https://doi.org/10.1252/jcej.17we259