Acknowledgement
Supported by : 충북대학교
References
- J. A. Mason and L. H. Sperling, Polymer Blends and Composites, Plenum Press, New York, 1976.
- M. Chanda and S. K. Roy, Industrial Polymers, Specialty Polymers, and Their Applications, CRC Press, New York, 2009.
- M. H. Walters and D. N. Keyte, Trans. Inst. Rubber Ind., 38, 40 (1962).
- J. E. Curry, in Polymer Blends and Alloys, M. J. Folkes and P. S. Hope, Editors, Blackie Academic & Professional, Glasgow, Chapter 2, p 7 (1993).
- M. Bains, S. T. Balke, D. Reck, and J. Horn, Polym. Eng. Sci., 34, 1260 (1994). https://doi.org/10.1002/pen.760341606
- D. C. Blackley and R. C. Charnock, J. Inst. Rubber Ind., 7, 60 (1973).
- A. Guyot, K. Landfester, F. J. Schork, and C. Wang, Prog. Polym. Sci., 32, 1439 (2007). https://doi.org/10.1016/j.progpolymsci.2007.07.003
- H. Keskkula and D. R. Paul, in Rubber Toughened Engineering Plastics, A. A. Collier, Editor, Chapman & Hall, London, Chapter 5, p 136 (1994).
- Y. S. Chun, Y. J. Kyung, H. C. Jung, and W. N. Kim, Polymer, 41, 8729 (2000). https://doi.org/10.1016/S0032-3861(00)00263-9
- F. Khan, K. Czechura, and P. R. Sundararajan, Eur. Polym. J., 42, 2899 (2006). https://doi.org/10.1016/j.eurpolymj.2006.06.007
- S. Mawson, S. Kanakia, and K. P. Johnston, Polymer, 38, 2957 (1997). https://doi.org/10.1016/S0032-3861(96)00852-X
- I. H. Lin, P. F. Liang, and C. S. Tan, J. Supercrit. Fluids, 51, 384 (2010). https://doi.org/10.1016/j.supflu.2009.10.008
- D. A. Hajduk, P. Urayama, S. M. Gruner, S. Erramilli, R. A. Register, K. Brister, and L. J. Fetters, Macromolecules, 28, 7148 (1995). https://doi.org/10.1021/ma00125a017
- A. V. Ruzette, P. Banerjee, A. M. Mayes, and T. P. Russell, J. Chem. Phys., 114, 8205 (2001). https://doi.org/10.1063/1.1361072
- M. Pollard, T. P. Russell, A. V. Ruzette, A. M. Mayes, and Y. Gallot, Macromolecules, 31, 6493 (1998). https://doi.org/10.1021/ma980316f
- J. Cho and Z. G. Wang, Macromolecules, 39, 4576 (2006). https://doi.org/10.1021/ma052565r
- S. W. Ryu, M. J. Kim, and K. H. Lee, Polymer Science and Technology, 19, 278 (2008).
- D. Y. Ryu, D. J. Lee, J. K. Kim, K. A. Lavery, T. P. Russell, Y. S. Han, C. H. Lee, and P. Thiyagarajan, Phys. Rev. Lett., 90, 235501 (2003). https://doi.org/10.1103/PhysRevLett.90.235501
- D. H. Lee, H. J. Kim, and J. K. Kim, Macromol. Symp., 240, 123 (2006). https://doi.org/10.1002/masy.200650816
- H. Ahn, D. Y. Ryu, Y. Kim, K. W. Kwon, J. Lee, and J. Cho, Macromolecules, 42, 7897 (2009). https://doi.org/10.1021/ma901313a
- J. Cho, K. Shin, K. S. Cho, Y. S. Seo, S. K. Satija, D. Y. Ryu, and J. K. Kim, Macromolecules, 41, 955 (2008). https://doi.org/10.1021/ma071604r
- J. A. Gonzales-Leon, M. H. Acar, S. W. Ryu, A. V. Ruzette, and A. M. Mayes, Nature(London), 426, 424 (2003). https://doi.org/10.1038/nature02140
- J. A. Gonzales-Leon, S. W. Ryu, S. A. Hewlett, S. H. Ibrahim, and A. M. Mayes, Macromolecules, 38, 8036 (2005). https://doi.org/10.1021/ma0508045
- K. H. Lee and S. W. Ryu, Macromol. Res., 20, 1294 (2012). https://doi.org/10.1007/s13233-012-0186-z
- M. Okubo, N. Miyachi, and Y. Liu, Colloid Polym. Sci., 269, 125 (1991). https://doi.org/10.1007/BF00660301
- M. Okubo, N. Miyachi, and Y. Liu, Colloid Polym. Sci., 272, 270 (1994). https://doi.org/10.1007/BF00655497
- M. Okubo and Y. Liu, Colloid Surf. A, 153, 609 (1999). https://doi.org/10.1016/S0927-7757(98)00483-X
- M. J. Kim, Y. Choi, and S. W. Ryu, Polymer(Korea), 32, 573 (2008).