대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제49권11호
  • /
  • Pages.853-859
  • /
  • 2011
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지
DOI QR코드

DOI QR Code

Spark Plasma Sintering법에 의해 예비 성형된 Al-10Si-5Fe-1Zr 분말합금의 고온 압축변형 거동

Compressive Deformation Behavior of Al-10Si-5Fe-1Zr Powder Alloys Consolidated by Spark Plasma Sintering Process

  • 박상춘 (인하대학교 신소재공학부) ;
  • 김목순 (인하대학교 신소재공학부) ;
  • 김경택 (한국생산기술연구원 에코공정연구부) ;
  • 신승용 (한국생산기술연구원 에코공정연구부) ;
  • 이정근 ((주)동양피스톤 연구소) ;
  • 류관호 ((주)동양피스톤 연구소)
  • Park, Sang-Choon (Division of Materials Science and Engineering, Inha University) ;
  • Kim, Mok-Soon (Division of Materials Science and Engineering, Inha University) ;
  • Kim, Kyung-Taek (Eco Materials & Processing Department, Korea Institute of Industrial Technology) ;
  • Shin, Seung-Young (Eco Materials & Processing Department, Korea Institute of Industrial Technology) ;
  • Lee, Jeong-Keun (R&D Center, Dong Yang Piston Co. Ltd.) ;
  • Ryu, Kwan-Ho (R&D Center, Dong Yang Piston Co. Ltd.)
  • 투고 : 2011.05.12
  • 발행 : 2011.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

Compressive deformation behavior of Al-10Si-5Fe-1Zr (wt%) alloy preform fabricated by SPS(spark plasma sintering) of gas atomized powder was investigated in the temperature range from 380 to $480^{\circ}C$ and at strain rates from $1.0{\times}10^{-3}$ to $1.0{\times}10^{0}s^{-1}$. Stress-strain curves showed a peak stress (${\sigma}_p$) during initial stage of deformation, followed by a steady state flow at all temperatures and strain rates tested. The (${\sigma}_p$) decreased with both increase in temperature and decrease in strain rate. Nearly full densification was found to occur in the compressively deformed specimens irrespective of test condition. TEM observation revealed a restricted grain growth during steady state flow.

키워드

과제정보

연구 과제번호 : 고성능 엔진 파워셀 부품 모듈 제조기술 개발

연구 과제 주관 기관 : 지식경제부

참고문헌

  1. H. Yamagata and T. Koike, J. Jpn. Inst. of Light Met. 52, 48 (1998).
  2. S. H. Ju, J. M. Choi, Y. J. Kim, I. M. Park, and Y. H. Park, Kor. J. Met. Mater. 48, 1003 (2010). https://doi.org/10.3365/KJMM.2010.48.11.1003
  3. H. S. Cho and M. S. Kim, J. Kor. Inst. Met. Mater. 37, 1191 (1999).
  4. H. S. Cho, H. G. Jeong, M. S. Kim, and H. Yamagata, Scripta Materialia 42, 221 (2000). https://doi.org/10.1016/S1359-6462(99)00335-8
  5. H. G. Jeong, Kenji Hiraga, and M. S. Kim, Materials Letters. 48, 219 (2001). https://doi.org/10.1016/S0167-577X(00)00307-4
  6. T. S. Kim and B. S. Chun, J. Kor. Inst. Met & Mater. 40, 873 (2002).
  7. P. Villars, A. Prince and H. Okamoto, Handbook of Ternary Alloy Phase Diagrams, p. 3617, ASM International, USA (1995).