Journal of the Korean Society of Mechanical Technology (한국기계기술학회지)

Korean Society of Mechanical Technology (한국기계기술학회)
권호 표지

Stress and Flow Analysis due to Installation Method of Fuel Tank at CNG Bus

CNG버스의 연료탱크 설치방법에 따른 응력과 유동해석

  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2011.11.15
  • Accepted : 2011.12.17
  • Published : 2011.12.31
⟨ Previous Next ⟩

Abstract

The safety at this study is investigated by flow or stress analyses due to configuration or installation direction of fuel tank in the existing CNG bus. In case of the lower ceiling with sharp type, the equivalent stress due to the explosion of fuel tank is less than the type of flat or arc. it becomes safer on passenger. In case of the installation direction of fuel tank in the existing CNG bus, the stress applied on the lower ceiling at transverse direction becomes less than at longitudinal direction. It is more stable on the safety of passenger. The harm on the explosion accident can be prevented by use of the analysis result at this study.

Keywords

References

  1. Park, K. T., Park, T. J. and Kang, B. R., "CNG 차량용 Regulator의 설계 및 성능해석," 대한기계학회 2007년도 추계학술대회 강연 및 논문 초록집, pp. 255-260, 2007.
  2. Lim, Y. W., Lee, Y. J., Yeon, Y. J., and Shin, D. C., "Risk reduction analysis upon replacement of diesel bus with CNG bus," 한국자동차공학회, 한국자동차공학회 2005년 추계학술대회논문집, Vol.I, pp. 788-797, 2005.
  3. 김병선, 조치룡, "복합재료 CNG 압력용기", 한국자동차 공학회 1992년 학술강연초록집(재료), pp. 74-81, 1992.
  4. Choi, S. C, Park, G. T. and Lee, J. W., "Leakage Cause for Fuel Cylinder of a Compressed Natural Gas Bus," 대한기계학회 2010년도 추계학술대회 강연 및 논문 초록집, pp. 63-67, 2010.
  5. Kim, H. Y., Bae, W. B., Jang, Y. J., and Kim, C., "Optimal Design of the Fuel Storage Vessel of CNG Automobile by Considering Structural Efficiency," 한국자동차공학회, 2010 KSAE 부문종합 학술대회, pp. 467-471, 2010.
  6. Kim, E. S., "Forensic Engineering Study on Assessment of Damage to Pressure Vessel Because of CNG Vehicle Explosion," 대한기계학회, 대한기계학회 2006년도 추계학술대회 논문집, pp. 197-202, 2006.
  7. Jang, K. M., Kim, Y. S. and Kim, C. K., "Safety management Plan of High Pressure Component Parts for CNG Bus," 대한기계학회, 대한기계학회 2010년도 추계학술대회 강연 및 논문 초록집, pp. 78-81, 2010.
  8. Cho, Y. M., "The Design of Dome Type Control Valve by the Fluent Analysis," Journal of Korean Society of Mechanical Technology, Vol. 8, No. 3, pp. 41-47, 2006.
  9. Swanson, J., 2009, Ansys 12.0, Ansys Inc, U.S.A.