참고문헌
- Moataz M. Attallah and Hana야 G. Salem ; Friction stir welding parameters, Mater Sci. Eng. A, 391(2005), 51-59 https://doi.org/10.1016/j.msea.2004.08.059
- P. Bala Srinivasan, W. Dietzel, R. Zettler, J. F. dos Santos and V. Sivan ; Stress corrosion cracking susceptibility of friction stir welded AA7075-AA6056 dissimilar joint, Mater Sci. Eng. A, 392(2005), 292-300 https://doi.org/10.1016/j.msea.2004.09.065
- M. Peel, A. Steuwer, M. Preuss and P. J. Withers ; Microstructure, mechanical properties and residual stress as a function of welding speed in aluminum AA5083 friction stir welds, Acta Mater., 51(2003), 4791-4801 https://doi.org/10.1016/S1359-6454(03)00319-7
- Y. S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan and T. Hashimoto ; Microstructure in the friction stir weld of an aluminum alloy, Metal. and mater. Trans. A, 32(2001), 941-948
- R. W. Fonda, J. F. Bingert and K. J. Colligan ; Development of grain structure during friction stir welding, Scripta Mater., 51(2004), 243-248 https://doi.org/10.1016/j.scriptamat.2004.04.017
- K. V. Java and S. L. Semiatin ; Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloy, Scripta Mater., 43(2000), 743-749 https://doi.org/10.1016/S1359-6462(00)00480-2
- Y.S. Sato, Y. Kurihara, S.H.C. Park, H. Kokawa and N. Tsuji ; Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding, Scripta Mater., 50(2004), 57-60 https://doi.org/10.1016/j.scriptamat.2003.09.037
- S. Lathabai, M. J. Painter, G.M.D. Cantin and V.K. Tyagi ; Friction spot joining of an extruded Al-Mg-Si alloy, Scripta Mater., 55(2006), 899-902 https://doi.org/10.1016/j.scriptamat.2006.07.046
- K. Nakata, Y.G. Kim, H. Fujii, T. Tsumura and T. Komazaki ; Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing, Mater Sci. Eng. A, 437(2006), 274-280 https://doi.org/10.1016/j.msea.2006.07.150
- Y.S. Sato, H. Yamanoi, H. Kokawa and T. Fukuhara ; Microstructural evolution of ultrahigh carbon steel during friction stir welding, scripta Mater., 57(2007), 557-560 https://doi.org/10.1016/j.scriptamat.2007.04.050
- K. Lee and K. Bang : Interfacial Microstructure of Dissimilar Friction Stir Welds between Al and Ti Alloy Sheets, Journal of KWJS, 28-5 (2010), 15-19 (in korean) https://doi.org/10.5781/KWJS.2010.28.5.015
- K. Bang, K. Lee, H. Bang and H. Bang : Interfacial Microstructure and Mechanical Properties of Dissimilar Friction Stir Welds between 6061-T6 Aluminum and Ti-6%Al-4%V Alloys, Mater. Trans., 52(2011), 974-978 https://doi.org/10.2320/matertrans.L-MZ201114
- TMS 2011 140th Annual Meeting Proceedings
- Scott Packer : Q60 Gtade FSW Parameters Recommendations, Technical Bulletin 090626, 1-2
- S. Hong : Next step and targets of FSW, Proc. of FSW Symposium of KWJS, 2 (2009) 1-14
- T. Miyazawa, Y. Iwamoto, T. Maruko and H. Fujii : Development of Ir based tool for friction stir welding of high temperature materials, Proc. of JWS, 86 (2010), 42-43 (in japanese)
피인용 문헌
- Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools vol.2015, pp.1687-8442, 2015, https://doi.org/10.1155/2015/343619