Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Development of the Tool for Friction Stir Welding of High Temperature Materials

고온재료의 마찰교반접합을 위한 툴의 개발

  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Moataz M. Attallah and Hana야 G. Salem ; Friction stir welding parameters, Mater Sci. Eng. A, 391(2005), 51-59 https://doi.org/10.1016/j.msea.2004.08.059
  2. P. Bala Srinivasan, W. Dietzel, R. Zettler, J. F. dos Santos and V. Sivan ; Stress corrosion cracking susceptibility of friction stir welded AA7075-AA6056 dissimilar joint, Mater Sci. Eng. A, 392(2005), 292-300 https://doi.org/10.1016/j.msea.2004.09.065
  3. M. Peel, A. Steuwer, M. Preuss and P. J. Withers ; Microstructure, mechanical properties and residual stress as a function of welding speed in aluminum AA5083 friction stir welds, Acta Mater., 51(2003), 4791-4801 https://doi.org/10.1016/S1359-6454(03)00319-7
  4. Y. S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan and T. Hashimoto ; Microstructure in the friction stir weld of an aluminum alloy, Metal. and mater. Trans. A, 32(2001), 941-948
  5. R. W. Fonda, J. F. Bingert and K. J. Colligan ; Development of grain structure during friction stir welding, Scripta Mater., 51(2004), 243-248 https://doi.org/10.1016/j.scriptamat.2004.04.017
  6. K. V. Java and S. L. Semiatin ; Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloy, Scripta Mater., 43(2000), 743-749 https://doi.org/10.1016/S1359-6462(00)00480-2
  7. Y.S. Sato, Y. Kurihara, S.H.C. Park, H. Kokawa and N. Tsuji ; Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding, Scripta Mater., 50(2004), 57-60 https://doi.org/10.1016/j.scriptamat.2003.09.037
  8. S. Lathabai, M. J. Painter, G.M.D. Cantin and V.K. Tyagi ; Friction spot joining of an extruded Al-Mg-Si alloy, Scripta Mater., 55(2006), 899-902 https://doi.org/10.1016/j.scriptamat.2006.07.046
  9. K. Nakata, Y.G. Kim, H. Fujii, T. Tsumura and T. Komazaki ; Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing, Mater Sci. Eng. A, 437(2006), 274-280 https://doi.org/10.1016/j.msea.2006.07.150
  10. Y.S. Sato, H. Yamanoi, H. Kokawa and T. Fukuhara ; Microstructural evolution of ultrahigh carbon steel during friction stir welding, scripta Mater., 57(2007), 557-560 https://doi.org/10.1016/j.scriptamat.2007.04.050
  11. K. Lee and K. Bang : Interfacial Microstructure of Dissimilar Friction Stir Welds between Al and Ti Alloy Sheets, Journal of KWJS, 28-5 (2010), 15-19 (in korean) https://doi.org/10.5781/KWJS.2010.28.5.015
  12. K. Bang, K. Lee, H. Bang and H. Bang : Interfacial Microstructure and Mechanical Properties of Dissimilar Friction Stir Welds between 6061-T6 Aluminum and Ti-6%Al-4%V Alloys, Mater. Trans., 52(2011), 974-978 https://doi.org/10.2320/matertrans.L-MZ201114
  13. TMS 2011 140th Annual Meeting Proceedings
  14. Scott Packer : Q60 Gtade FSW Parameters Recommendations, Technical Bulletin 090626, 1-2
  15. S. Hong : Next step and targets of FSW, Proc. of FSW Symposium of KWJS, 2 (2009) 1-14
  16. T. Miyazawa, Y. Iwamoto, T. Maruko and H. Fujii : Development of Ir based tool for friction stir welding of high temperature materials, Proc. of JWS, 86 (2010), 42-43 (in japanese)

Cited by

  1. Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools vol.2015, pp.1687-8442, 2015, https://doi.org/10.1155/2015/343619