참고문헌
- Park, K.-D. and Jin, Y.-B., 2004, "The Effect of Compressive Residual Stress on Fatigue Fracture of the Spring steel," Trans. of the KSME,, Vol. 3, No. 3, pp. 79-85.
- Menig, R., Pintschovius, L., Schulze, V. and Vöhringer, O., 2001, "Depth Profiles of Macro Residual Stress in Thin Shot Peened Plates Determined by X-ray and Neutron Diffraction," Scr. Mater., Vol. 45, pp. 977-983. https://doi.org/10.1016/S1359-6462(01)01063-6
- Wick., A., Schulze, V. and Vohringer, O., 2000, "Effects of Warm Peening on Fatigue Life and Relaxation Behavior of Residual Stresses in AISI 4140 Steel," Mater. Sci. Eng., A., Vol. 293, pp. 191-197. https://doi.org/10.1016/S0921-5093(00)01035-2
- Meo, M., and Vignjevic, R., 2003, "Finite Element Analysis of Residual Stress Induced by Shot Peening Process," Adv. Eng. Softw., Vol. 34, pp. 569-575. https://doi.org/10.1016/S0965-9978(03)00063-2
- Barrios, D. B., Angelo, E. and Goncalves, E., 2005, "Finite Element Shot Peening Simulation for Residual Stress. Analysis and Comparison with Experimental Results," Mech. Computational., Vol. 14, pp. 113-121.
- Schiffner, K., Drostegen, C. and Helling, 1999, "Simulation of Residual Stresses by Shot Peening," Comput. Struct., Vol. 72, pp. 329-340. https://doi.org/10.1016/S0045-7949(99)00012-7
- Bhuvaraghan, B., Srinivasan, S. M., Maffeo, B. and Prakash, O., 2010, "Analytical Solution for Single and Multiple Impacts with Strain-rate Effects for Shot Peening," CMES, Vol. 1550, No.1, pp.1-22.
- Guaglliano, M., 2001, "Relating Almen Intensity to Residual Stresses Induced by Shot Peening: Anumerical Approach," J. Mater. Process. Technol., Vol. 110, pp. 277-286. https://doi.org/10.1016/S0924-0136(00)00893-1
- Meguid, S.A., Shagal, G. and Stranart, J.C., 2002, "3D FE Analysis of Peening of Strain-Rate Sensitive Materials Using Multiple Impingement Model," Int. J. Impact Eng., Vol. 27, pp.119-134. https://doi.org/10.1016/S0734-743X(01)00043-4
- Meguid, S.A., Shagal, G., Stranart, J.C. and Daly, J., 1999. "Three-Dimensional Dynamic Finite Element Analysis of Shot-Pening Induced Residual Stresses," Finite Elem. Anal. Des., Vol. 31, pp.179-191. https://doi.org/10.1016/S0168-874X(98)00057-2
- Meguid, S.A., Shagal, G. and Stranart, J.C., 1999, "Finite Element Modeling of Shot-Peening Residual Stresses," J. Mater. Process. Technol., Vol. 92-93, pp. 401-404.
- Kim, T., Lee, J. H., Lee, H. and Cheong, S.-k., 2010, "An Area-Average Approach to Peening Residual Stress Under Multi-Impacts Using a Three- Dimensional Symmetry-Cell Finite Element Model with Plastic Shots," Mater. Des., Vol. 31, pp. 50-59. https://doi.org/10.1016/j.matdes.2009.07.032
- Kim, T., Lee, W.-B., Oh, Y. T. and Lee, Y., 2009,"The Effect of Shot Peening Cycle on Residual Stress Distribution," Proc. Kor. Soc. Tech. Plast. Conf,, pp. 52-56.
- Kim, T. and Lee, H., 2008, "A 3D FEA Model with Plastic Shots for Evaluation of Peening Residual Stress due to Multi-Impact," Trans. Kor. Soc. Mech. Eng.,Vol. 32, No. 8, pp. 642-653. https://doi.org/10.3795/KSME-A.2008.32.8.642
- Premack, T. and Douglas, A. S., 1995, "Three- Dimensional Analysis of The Impact Fracture of 4340 Steel," Int. J. Solids Struct, Vol. 32, No. 17-18, pp. 2793-2812. https://doi.org/10.1016/0020-7683(94)00295-8
- Wall, O., 2002, "Numerical Modeling of Fracture Initiation in Large Steel Specimens at Impact," Eng. Fract. Mech., Vol. 69, pp. 851-863. https://doi.org/10.1016/S0013-7944(01)00112-6
피인용 문헌
- Effects of Shot Peening Projection Pressure on Electrochemical Characteristics of ALBC3 Alloy in Seawater vol.47, pp.1, 2014, https://doi.org/10.5695/JKISE.2014.47.1.025