DOI QR코드

DOI QR Code

발전소 급수용 펌프 배관계의 음향학적 현상 고찰

Acoustic Investigation on BFP Piping System in a Power Plant

  • 투고 : 2011.08.24
  • 심사 : 2011.10.12
  • 발행 : 2011.11.20

초록

Pressure pulsation of exciting sources that generally occurs on the piping system connected to the discharge of BFP(boiler feed water pump) in power plants causes wave reflection, wave interference, resonance, standing wave and so on. But if the operating speed of the pump is changed, the state of the noise and vibration can be done because characteristics of the exciting source are changed. This paper is to investigate the cause of the noise and vibration occurring on the piping system when the operating speed of BFP is down in accordance with lowering of the power generation. It is approached to two points of view ; Firstly, it is examined whether the pulsation source impacts on the shell mode vibration that vibrates radially across the cross-section of the pipe. But it doesn't affect the shell mode as much as the resonance occurs. Secondly, to find the relation between the pulsation source and the acoustic mode of the piping system, analysis for the piping system by indirect BEM(boundary element method) is carried out. Therefore it is investigated that the mechanism of the noise and vibration relates with acoustic mode of the piping system.

키워드

참고문헌

  1. Kim, Y. H., 2010, Examination on High Vibration and Branch Vent Pipe's Failure of Complex Piping System Suppling Condensate-water in Power Site, Proceedings of the KSNVE Annual Autumn Conference, pp. 380-384.
  2. Guelich, J. F. and Bolleter, U., 1992, Pressure Pusations in Centrifugal Pumps, Transactions of ASME, Vol. 114, pp. 272-279.
  3. Bae, C. H., Cho, C. H., Yang, K. H. and Park, Y. P., 2003, Vibration and Noise Reduction of Pump and Pipe System, Spring Conference Proceedings of the KSNVE Annual Spring Conference, pp. 1065-1069.
  4. Jeon, C. B., 2007, A Study on Vibration Control for Reheater Attemperator Piping in Power Plant, Proceedings of the KSNVE Annual Autumn Conference, KSNVE07A-01-01.
  5. Korea Electricity Power Co., 2000, Practical Affairs for Thermal Power Generation, Korea Electricity Power Co., pp. 277-280.
  6. Jeon, C. B., Park, S. I. and Chun, H. S., 2006, A Study on Evaluation Method for Piping Shell Mode Vibration, Proceedings of the KSNVE Annual Spring Conference, KSNVE06S-26-105.
  7. Blevins, R. D., 1979, Formulas for Natural Frequency and Mode Shape, Krieger Pub. Co.
  8. Heo, H. S., Bae, S. J., Lee, H. K., Lee, G. S., Hwang, J. S., Lee, D. G. and Kim, H. C., 2008, Numerical Study on the Characteristics of Pressure Pulsations according to Design Factors of Fuel Rail with Self Damping Effect, Proceedings of The 5th National Congress on Fluids Engineering, pp. 332-336.
  9. Kim, H. S. and Kim, C. B., 2003, Structure Borne Noise Analysis of a Flexible Body in Multibody System, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No. 11, pp. 882-889. https://doi.org/10.5050/KSNVN.2003.13.11.882
  10. Cho, C. H., Bae, C. H. and Yang, K. H., 2003, Research for abnormal Vibration & Noise Control on the Discharge Piping of the Pump Feeding Water, Ministry of Commerce, Industry and Energy.
  11. Yang, K. H., Cho, C. H. and Bae, C. H., 2004, Study on Noise Control for Piping System of BFP in a Power Plant, Proceedings of the Korean Society for Noise and Vibration Engineering Conference, pp. 490-494.
  12. Lee, J. W., 2000, Noise & Vibration Handbook, Science Technology.
  13. Yang, B. S., 2002, Vibration of Rotating Machines, Intervision Publishing Company, pp. 559-603.
  14. Frank Fahy, 2001, Foundation of Engineering Acoustics, Academy Press, New York.