Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Study on Drainage and Physical Properties of KOCC Handsheet Containing Pretreated Wooden Fillers

전처리 목질계 충전제를 이용한 KOCC 수초지의 탈수속도와 물성 변화

  • Chae, Hee-Jae (Ssangyong Paper co., Ltd.) ;
  • Park, Jong-Moon (Chungbuk National University, College of Agriculture, Life & Environment Sciences, Dept. of Wood & Paper Science)
  • 채희재 (쌍용제지) ;
  • 박종문 (충북대학교 농업생명환경대학 목재종이과학과)
  • Received : 2011.06.27
  • Accepted : 2011.09.07
  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, the use of recycled fibers was increased in order to replace the virgin pulp for low production cost and forest conservation. However, the recycled fibers decreases drainage rate, papermaking efficiency and product quality by short fibers and low wettability because of hornification. To overcome the limitation of low drainage rate, the technology of organic fillers were applied. Wooden fillers gave high bulk and stiffness of paper, but they reduced the strength of paper. In order to improve strength properties 4 types of strength additives were added and analyzed. Cationic starch, branched strength additive, linear wet strength additive, and linear dry strength additive were used. The drainage rate and paper properties such as bulk, air permeability and tensile strength were measured. As results of analysis, addition of branch type of strength agent such as C-starch was effective than linear type of strength agent in the drainage rate. Nevertheless there was no effect on the drainage rate by adding the pretreated wooden fillers. By adding the pretreated wooden fillers, bulk, air permeability and tensile strength of handsheets were improved with low dosage than non-pretreated fillers.

Keywords

References

  1. 이학래, 이복진, 임기표, 서영범, 원종명, 손창만, 제지과학, 광일문화사: 281-293 (2000).
  2. Jang, C. S., A Study in Technical Development and Practical Use of Korean-type Mobile Carbonization Apparatus for the Field Utilization of Logging Residues, Korea Rural Economic Institute (2004).
  3. Mabee, S. W., Controlled filler preflocculation - improved formation, strength and machine performance, Proceeding of 2001 TAPPI Papermakers conference, TAPPI Press, Atlanta.
  4. Li, L., Collos, A. and Pelton, R., A new analysis of filler effects on paper strength, J. Pulp Paper Sci. 28(8):267-273 (2002).
  5. Han, Y. R., and Seo, Y. B., Effect of particle shape and size of calcium carbonate on physical properties of paper, Journal of Korea TAPPI 29(1):1-7 (1997).
  6. 이경호, 선응집된 충전물의 크기와 분포가 종이의 물성에 미치는 영향, 서울대학교, 석사학위논문 (2005).
  7. Shin, T. G., Kim, C. H., Chung, H. K., Seo, J. M., and Lee, Y. R., Fundamental study on developing ligno-cellulosic fillers for papermaking (I), Journal of Korea TAPPI 40(2):8-15 (2008).
  8. Kim, C. H., Lee, J. Y., Lee, Y. R., Chung, H. K., Back, K. K., Lee, H. J., Gwak, H. J., Gang, H. R., and Kim, S. H., Fundamental study on developing lignocellulosic fillers for papermaking(II) - Effect of lignocellulosic fillers on paper properties, Journal of Korea TAPPI 41(2) :1-6 (2009).
  9. Son, D. J., Kim, H. S., and Kim, B. Y., Effects of polymer coated micro pulp on paper properties, Journal of Korea TAPPI 42(1):48-53 (2010).
  10. 한창석, 이재훈, 원종명, 목질계 첨가제가 초지 및 습부압착 탈수에 미치는 영향, 한국펄프.종이공학회, 2001 추계학술발표논문집, pp. 70-74 (2002).
  11. 한창석, 원종명, 목질계 첨가제가 평량에 따른 탈수 특성에 미치는 영향, 한국펄프.종이공학회, 2002 춘계학술발표논문집, pp. 63-69 (2002).
  12. 한창석, 원종명, 습부압착 및 건조시 목질계 첨가제에 의한 탈수 특성 개선, 한국펄프.종이공학회, 2002 추계학술발표논문집, pp. 241-246 (2002).
  13. 이영록, 김철환, 이지영, 정호경, 백경길, 이희진, 곽혜정, 개질처리된 유기충전제가 종이에 미치는 영향, 한국펄프.종이공학회, 2009 춘계학술발표논문집, pp. 119-126 (2009).