References
- N. Asnafi, 1995, On strength, stiffness and dent resistance of car body panels, J. Mater. Process. Technol., Vol. 49, pp. 13-31. https://doi.org/10.1016/0924-0136(94)01333-V
- G. Ekstrand, N. Asnafi, 1998, On testing of the stiffness and the dent resistance of autobody panels, Mater. Design, Vol. 19, pp. 145-156. https://doi.org/10.1016/S0261-3069(98)00028-4
- S. Holmberg, P. Thilderkvist, 2002, Influence of material properties and stamping conditions on the stiffness and static dent resistance of automotive panels, Mater. Design, Vol. 23, pp. 681-691. https://doi.org/10.1016/S0261-3069(02)00079-1
- Y. Zhang, X. Lai, P. Zhu, W. Wang, 2006, Lightweight design of automobile component using high strength steel based on dent resistance, Mater. Design, Vol. 27, pp. 64-68. https://doi.org/10.1016/j.matdes.2004.09.010
- I. S. Kim, T. J. Kim, 2007, Development of Door outer panel using HSS for improving dent resistance, Trans. of Mater. Process, Vol. 16, No. 4, p. 254. https://doi.org/10.5228/KSPP.2007.16.4.254
- T. Kvackaj, I. Mamuzic, 2006, Development of bake hardening effect by plastic deformation and annealing conditions, METALURGIJA, Vol. 45, pp. 51-55.
- L. Hong, Zhao Gang, Liu Chun-ming, Zuo Liang, 2007, Effects of different tempers on precipitation hardening of 6000 series aluminium alloys, Trans. of Nonferrous Metals Society of China, Vol. 17, pp. 122-127. https://doi.org/10.1016/S1003-6326(07)60059-4
- K. Dehghani, A. Nekahi, M. A. M. Mirzaie, 2010, Optimizing the bake hardening behavior of Al7075 using response surface methodology, Mater. Design, Vol. 31, pp. 1768-1775. https://doi.org/10.1016/j.matdes.2009.11.014
- C. H. Shen, 2011, Pre-treatment to improve the bake-hardening response in the naturally aged Al-Mg-Si alloy, J. Mater. Sci. Techol. , Vol. 27, No. 3, pp. 205-212. https://doi.org/10.1016/S1005-0302(11)60050-9
- Dicellello JA et al.1974, Design criteria for the dent resistance of autobody panels, SAE, pp. 389-397.
- Z. qiang, Y. Yang, 2010, Precipitation process along dislocations in Al-Cu-Mg alloy during artificial aging, Mater. Sci. and Eng.: A, Vol. 528, Issue 2, pp. 706-714. https://doi.org/10.1016/j.msea.2010.09.069