References
- Song, J. Y., Park, J. C. and Ahn, Y. S., 2010, "Effect of Cast Microstructure on Fatigue Behaviors of A356 Aluminum Alloy for Automotive Wheel," Trans. of the KFS, Vol.30, No.1, pp.46-51.
- Kim, M. S., Ko, K. J., Song, H. W., Yang, C. G. and Kim, K. M., 2004, "The Finite Element Analysis on 2-piece Forged Wheel for Fatigue Life Prediction," Proc. of the KSAE, Fall Conference, pp.691-696.
- Kim, M. S., Ko, K. J., Kim, J. H., Yang, C. G. and Kim, K. M., 2004, "The Study on the Fatigue Life Prediction on Wheels Through CAE," Trans. of the KSAE, Vol.12, No.2, pp.117-122.
- Ko, K. J., Kim, M. S., Song, H. W. and Yang, C. G., 2006, "A Study on the Stiffness of a 13degree-Type Impact Tester for Aluminum Wheels," Trans. of the KSAE, Vol.14, No.4, pp.12-19.
- Noh, B. W., Bae, S. I. and Kim, D. K., 1997, "Structural Analysis of Aluminum Wheel for Automobiles," Proc. of the KSPE Fall Conference, pp.822-825.
- Jeong, S. K., 2004, Study on the Alloy Wheel Design of the Car, Hongik University, Master's Thesis.
- Kim, B., S., Chi, C., H. and Mun, S., D., 2001, "An Experimental Study on Vibration Characteristics of Alalloy Wheel for Passenger Car," Proc. of the KSME Fall Conference, pp.623-628.
- Kim, B. S., 2005, "An Study on Vibration Characteristics of Automobile Al-alloy Wheel," Trans. of the KSMTE, Vol.14, No.3, pp.122-127.
- Kim, S., 2006, Performance Analysis of Automotive Wheel Through Dynamic Simulation, Chonbuk National University, Master's Thesis.
- Cho, J. U. and Han, M. S., 2010, "Analysis of Fatigue Damage at Wheel under Variable Load," Trans. of the KSMTE, Vol.19, No.6, pp.717-894.
- Sherwood, J., A., Ayres, J., M., Gross, T., S. and Watt, D., 1995, "An Investigation of Tire-Wheel Interface Loads Using ADINA," Computers & Structures, Vol.56, No.2-3, pp.377-387. https://doi.org/10.1016/0045-7949(95)00030-K
- Kalyanasundaram, S., Lowe, A. and Watters, A. J., 2006, "Finite Element Analysis and Optimization of Composite Wheelchair Wheels," Composite Structures, Vol.75, No.1-4, pp.393-399. https://doi.org/10.1016/j.compstruct.2006.04.011
- Moaveni, S., 2008, Theory and Application with ANSYS, Pearson Education/Prentice Hall., USA.
- Swanson, J., 2009, Ansys 12.0, Ansys Inc., USA.
- Kim, K., S., Lim, H., S. , Kim, D., G. and Cho, J., G., 2010, Automotive Chassis, Goomibook, Korea.
- Song, M., J., Jung, S., Y., Hwang, B., C. and Kim, C., 2010, "A Study on Structure Analysis and Fatigue Life of the Common Rail Pipe," Trans. of Materials Processing, Vol.19, No.2, pp.88-94. https://doi.org/10.5228/KSPP.2010.19.2.088
Cited by
- A Property of Crack Propagation at the Specimen of CFRP with Layer Angle vol.40, pp.12, 2016, https://doi.org/10.3795/KSME-A.2016.40.12.1013
- An Analytical Study on Crack Behavior Inside Standard Compact Tension Specimen with Holes vol.40, pp.6, 2016, https://doi.org/10.3795/KSME-A.2016.40.6.531