동력기계공학회지 (Journal of Power System Engineering)

  • 제15권4호
  • /
  • Pages.31-36
  • /
  • 2011
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

40피트 경량 컨테이너 트레일러의 내구성 평가

Durability Evaluation of a Lightweight 40-feet Container Trailer

  • 김진곤 (대구가톨릭대학교 기계자동차공학부) ;
  • 김정윤 (대구가톨릭대학교 기계자동차공학부) ;
  • 윤현중 (대구가톨릭대학교 기계자동차공학부)
  • 투고 : 2011.02.11
  • 심사 : 2011.05.24
  • 발행 : 2011.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The need for the lightweight of special vehicle trailer frame is substantially growing due to high gasoline prices and serious environmental issues. In this study, we develop a new lightweight sub-frame for large container trailers and evaluate its durability through a fatigue test. To this end, a reliable three-dimensional parametric finite element model of a sub-frame is constructed and then an optimized lightweight sub-frame is newly developed by using the Taguchi method. Next, we make a trial product of the optimized lightweight sub-frame and conduct a driving test to identify the driving load history at vulnerable areas. Finally, we evaluate the durability of the developed lightweight sub-frame through a fatigue test based on the load history.

키워드

참고문헌

  1. T. H. Lee et al., 2000, "Optimization of Chassis Frame by Using D-Optimal Response Surface Model", Tansactions of KSME, Vol. 24, No. 4, pp. 894-899.
  2. J. K. Shin et al., 2001, "Lightweight Automobile Design with ULSAB Concept Using Structural Optimization", Journal of the Computational Structural Engineering Institute of Korea, Vol. 14, No. 3, pp. 277- 286.
  3. B. K. Kim et al., 2005, "Optimal Design of the Passenger Vehicle Aluminum Seat for Weight Reduction and Durability Performance Improvement", Transactions of KSAE, Vol. 10, No. 3, pp. 58-63.
  4. H. J. Yang et al., 2007, "Design of High Stiffness and Lightweight Body for Stiffness Distribution Ratio", Transactions of KSNVE, Vol. 17, No. 10, pp. 901-906. https://doi.org/10.5050/KSNVN.2007.17.10.901
  5. H. S. Jung and T. Kwon, 2006, "Topology optimization of rolling stock end frame", Proceedings of Korea Society of Mechanical Engineers Annual Spring Meeting, pp. 1296-1301.
  6. P. Eriksson, 2001, "Optimisation of a bus body structure", International Journal of Heavy Vehicle Systems, Vol. 8, No. 1, pp. 1-16. https://doi.org/10.1504/IJHVS.2001.001151
  7. F. Lan et al., 2004, "Comparative analysis for bus side structures and lightweight optimization", Journal of Automobile Engineering, Vol. 218, No. 10, pp. 1067- 1075. https://doi.org/10.1177/095440700421801001
  8. ANSYS Structural Analysis Guide 9.0, ANSYS, Inc., 2004.
  9. M. S. Phadke, 1989, Quality engineering using robust design, Prentice-Hall, New Jersey.
  10. J. G. Kim and M. S. Yoon, 2010, "Optimal Design of Lightweight Frame for Heavy Flat-Bed Trailer by Using Taguchi Method", Transactions of KSME, Vol. 34, No. 3, pp. 353-359.

피인용 문헌

  1. Design and Analysis of Twist-lock with Automatic Locking Mechanism for Container Trailer vol.23, pp.6, 2011, https://doi.org/10.9726/kspse.2019.23.6.079