Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지

Effects of Blend Ratio and Fineness on the Physical Properties of CDP/Tencel Blended Yarns

CDP/Tencel 혼방사의 혼합비와 섬도에 따른 물리적 특성의 변화

  • Choi, Hae-Young (FTIT, Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University) ;
  • Choi, Han-Na (FTIT, Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University) ;
  • Lee, Si-Woo (SG Choongnam Spinning Co. Ltd.) ;
  • Hong, Yun-Kwang (Korea Jacquard Textile Institute) ;
  • Lee, Seung-Goo (FTIT, Department of Advanced Organic Materials & Textile System Engineering, Chungnam National University)
  • 최혜영 (충남대학교 유기소재섬유시스템 공학과) ;
  • 최한나 (충남대학교 유기소재섬유시스템 공학과) ;
  • 이시우 ((주)에스지충남방적) ;
  • 홍윤광 (한국자카드섬유연구소) ;
  • 이승구 (충남대학교 유기소재섬유시스템 공학과)
  • Received : 2011.04.25
  • Accepted : 2011.06.06
  • Published : 2011.06.30
⟨ Previous Next ⟩

Abstract

Blended yarns comprising CDP and Tencel (TA) were produced for fabrics with improved color intensity. Their tensile force and extension and bending properties were investigated to evaluate their ease of handling during use. Their surface properties were also assessed by SEM and evaluating hairiness. Tensile force and extension decreased with increasing TA content due to slippage between CDP and TA. Bending strength was directly proportional to TA content.

Keywords

Acknowledgement

Grant : 섬유산업스트림간 협력기술개발사업

Supported by : 지식경제부

References

  1. http://www.krifi.re.kr/2008/S/S Europe Textile Review
  2. http://www.samsungdesign.net/Fair/FairReport/
  3. I. G Min, C. W. Joo, and D. C. Kim, "Characterization of the Cotton/Filament Composite Yam Produced on a Modified Open-End Friction Spinner", J Korean Fiber Soc, 1995, 32, 1205-1214.
  4. C. O. Graham, C. L. Shepard, and R. M. H. Kullman, "Cotton-Wrapped Yarns-A Process to Eliminate Sizing and Desizing", Text Res J, 1980,50, 108-114. https://doi.org/10.1177/004051758005000210
  5. P. Pramanik and V. M. Patil, "Low Stress Mechanical Behavior of Fabrics Obtained from Different Types of Cotton/Nylon Sheath/Core Yarn", IJFTR, 2009, 34, 155-161.
  6. S. M. Choi, "Trends in Technology of Nylon and Polyester Fibers", Polym Sci Technol, 1996, 7, 4-13.
  7. K. S. Cho, E. J. Lee, and J. Y. Im, "Changes in Mechanical Properties, Hand, and Appearance according to Dyeing of Cotton, PET, Nylon, and Cotton Mixture Fabrics", J Korean Soc Clothing Textiles, 1996, 20, 1138-1150.
  8. Y. S. Koo, "Bending Behavior of Coated Yarns", Fiber Polym, 2001, 2, 148-152. https://doi.org/10.1007/BF02875328
  9. D. H. Kang and J. S. Lee, "Physical Performance of Metallic Jacquard Fabrics", J Korean Soc Clothing Textiles, 2009, 33, 149-159. https://doi.org/10.5850/JKSCT.2009.33.1.149
  10. D. H. Kang and J. S. Lee, "Sensibility Evaluation of Metallic Jacquard Fabrics", J Korean Soc Clothing Textiles, 2009, 33, 299-307. https://doi.org/10.5850/JKSCT.2009.33.2.299
  11. R. C. Dhingra and R. Postle, "The Bending and Recovery Properties of Continuous-filament and Staple-fibre Yarns", J Text Inst, 1976, 67, 426-433. https://doi.org/10.1080/00405007608630161
  12. J. W. Park and A. G. Oh, "Bending Rigidity of Yarns", Text Res J, 2006, 76, 478-485. https://doi.org/10.1177/0040517506063915
  13. G M. Abbott and P. Grosberg, "Measurement of Fabric Stiffness and Hysteresis in Bending", Text Res J, 1966, 36, 928-930. https://doi.org/10.1177/004051756603601012
  14. A. G Oh, H. S. Kim, and S. J. Kim, "Effect of Blend Ratio of Fibres and Twist Structure of the Yarns on the Bending Properties of Staple Yarns (1)-Bending Properties of Single Yarns-", J Korean Fiber Soc, 1993, 30, 431-441.
  15. T. J. Kang, "The Hairiness Measurement Method Of Spun Fiber and Effect of the Spinning Processing Condition", J Korean Fiber Soc, 1987, 24, 103-113.
  16. Y. Huh and Y. R. Kim, "Structural Characteristics and Hairiness of Friction Spun Yarns", Text Sci Eng, 2007, 44, 97-105.