초록
본 연구에서는 현재 전 세계적으로 해안선 회복공법의 주류가 된 연성방어 중 하나인 샌드바이패싱을 위한 새로운 시스템을 제안하고자 한다. 검증을 위하여 경제성을 고려한 연구장비를 설계 및 제작하였다. 본 장비의 모래 토출율 예측은 일반적인 하천준설 시스템에 적용시켜 정류상태에서 시간당 토출된 물과 토사 무게를 측정 분석하는 방법으로 수행했다. 자료의 분석 결과, 본 시스템은 이론치에 약 9.6% 차이로 근접한 618 ton/hr의 토출율을 나타냈다. 본 토사류는 고밀도 흐름으로 가정했을 때 비교적 높은 수준으로 예측이 가능함을 알았다. 현장실험에 의한 토출율을 기초로 모래의 토출부피를 예측하였다. 본 시스템과 동일한 400 HP 엔진, 흡입 파이프 300 mm (12 inch), 토출 파이프 250 mm(10 inch)인 미국 플로리다 South Lake Worth Inlet에 설치되어 있는 고정식 샌드바이패싱 장비는 함미비가 20% 수준이며 토사 토출율이 $110\;m^3/hr$이다. 본 연구에서 제안된 장비의 펌핑 능력은 함미비가 동일할 때, 플로리다 설비와 거의 유사한 토사 효율이 $103\;m^3/hr$로 예측된다. 본 장비는 플로리다에 설치된 고정식이 아니며 친수성을 고려한 이동식 형태이다. 플로리다 South Lake Worth Inlet 설비의 샌드바이패싱 단가는 미화 8~9 달러/$m^3$이다(Brunn, 1993). 본 시스템은 모래량이 적은 경우에 적절하며 이동을 위한 별도의 장비가 필요하지 않으므로 경제적이고 운행을 위해 25~30 l/hr의 경유가 소모된다. 많은 양의 모래이동을 위해 다수의 소형장비를 동시에 운영하는 시스템은 추후 연구대상이 될 것으로 기대된다.
A new type of sand bypassing system is proposed for recovering the eroded beach in this study. This system provides an added methodology to the soft defence which is main recovery method for the coastal shore protection in the world. The study proposes a conceptional design and manufacturing procedure for the relatively small size machine of sand bypassing. In order to get the discharging volume information, the power capacity of the system is tested in the field. The discharge rate of the new system shows up to the expected maximum of 618 ton/hr which is 9.6% lower than that by theoretical calculation. It gives a resonable agreement in this system when the flow is assumed to be of the high density. In this study, the delivering volume of sand is estimated according to the discharge rate. The combination of 300 mm(12 inch) intake and 250 mm(10 inch) discharge pipe line has the pumping capacity of $103\;m^3/hr$ which is nearly the same as that of South Lake Worth Inlet sand bypassing system, Florida, U.S.A.. The proposed system added the mobility to its merit. The unit price of Florida's sand bypassing is $$8~9/m^3$ (US). The system would be economically suitable for small volume of sand because no additional equipment is necessary for the intake. The diesel fuel of 25~30 l/hr was consumed during the system operation. The multiple working system would be the next investigation target for large volume of sand.