Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Performance Analysis of the Rubber Belt type CVT System

고무 벨트식 무단변속기 시스템의 성능분석

  • 김성모 (서울과학기술대학교 나노 IT 메카트로닉스과) ;
  • 정춘화 (서울대학교 기계항공 공학부) ;
  • 임원식 (서울과학기술대학교 자동차공학과) ;
  • 차석원 (서울대학교 기계항공 공학부)
  • Received : 2011.06.21
  • Accepted : 2011.08.09
  • Published : 2011.08.15
Download PDF
⟨ Previous Next ⟩

Abstract

CVT(Continuously Variable Transmission) is one of the most promising candidates for the future automobile transmission because of its continuously variable gear ratio and reduced shift shock. It is also possible to operate the power source at its high efficiency region with CVT. The CVT system consists of thrust plate, driving pulley, belt, driven pulley, and preload spring of output shaft. In this paper, the dynamic modeling of a CVT system is completed to obtain the static performances of CVT system. A simulator is implemented on Matlab(Simulink), which can analyse the static performances of a CVT system. The methods for improving the total efficiency of a motorcycle system are also proposed based on the simulation results. In this study we increase the capacity factor of CVT up to the three times of default specification.

Keywords

References

  1. Kim, K. H., and Choi, S. B., 2007, "Continuously Variable Transmission Slip and Gear Ratio Simultaneous Control Using Sliding Mode Control," 2007 Fall Conference Proceedings of the KSAE, pp. 988-993.
  2. Kim, H. S., Lee, H. R., Yoo, T. Y., Song, H. L., and Kim, H. S., 2000, "Analysis of Dry CVT System," 2000 Fall Conference Proceedings of the KSAE, pp. 691-696.
  3. Cho, Y. H., and Kim, Y. H., 1997, "A Study on the Optimal Operating Line of Continuously Variable Transmission," 1997 Spring Conference Proceedings of the KSAE, pp. 473-478.
  4. Srivastava, and Nilabh, 2005, "On the Transient Dynamics of a Metal Pushing V-belt CVT at High Speeds," International Journal of Vehicle Design, Vol. 37, No. 1, pp. 46-66. https://doi.org/10.1504/IJVD.2005.006088
  5. Jeong, S. H., and Park, J. W., 2008, "Rotor Dynamics Analysis According to Positions of Components in High Speed Rotor," Proceedings of the KSMTE Fall Conference 2008, pp. 381-386.
  6. Hong, S. W., and Choi, S. H., 2006, "An Improved Dynamic Model for Multi-stepped Rotor System," No. 2, Proceedings of the KSMTE Fall Conference 2006, pp. 107-113.
  7. Kim, k. k., Kim, J. S., and Kang, M. C., 2007, "Studies On Improvement in the Coefficient of Friction on Oil Seal Rubber by Ion Implantation," Proceedings of the KSMTE Fall Conference 2007, pp. 166-171.