DOI QR코드

DOI QR Code

Study on Organic Rankine Cycle (ORC) for Maximum Power Extraction from Low-Temperature Energy Source

저온 열원으로부터 최대 동력을 생산하기 위한 유기랭킨사이클(ORC)에 관한 연구

  • Kim, Kyoung-Hoon (Dept. of Mech. Eng., Kumoh National Inst. Tech.) ;
  • Han, Chul-Ho (Dept.of Intelligent Mech.Eng., Kumoh National Inst. Tech.) ;
  • Kim, Gi-Man (Dept. of Mech. System Eng., Kumoh National Inst. Tech.)
  • 김경훈 (금오공과대학교 기계공학과) ;
  • 한철호 (금오공과대학교 지능기계공학과) ;
  • 김기만 (금오공과대학교 기계시스템공학과)
  • Received : 2011.04.20
  • Accepted : 2011.06.07
  • Published : 2011.06.30

Abstract

ORC(organic Rankine cycle) has potential of reducing consumption of fossil fuels and has many favorable characteristics to exploit low-temperature heat sources. This work analyzes performance of ORC with superheating using low-temperature energy sources in the form of sensible energy. Maximum mass flow rate of a working fluid relative to that of a source fluid is considerd to extract maximum power from the sources. Working fluids of R134a, $iC_4H_{10}$ and $C_6C_6$, and source temperatures of $120^{\circ}C$, $200^{\circ}C$ and $300^{\circ}C$ are considered in this work. Results show that for a fixed source temperature thermal efficiency increases with evaporating temperaure, however net work per unit mass of source fluid has a maximum with respect to the evaporating temperature in the range of low source temperature. Results also show that the maximum power extraction is possible with R134a for the source temperature of $120^{\circ}C$, with $iC_4H_{10}$ for $200^{\circ}C$, and with $C_6C_6$ for $300^{\circ}C$.

Keywords

References

  1. Rayegan R, Tao Y.X, A procedure to select working fluids for Solar Organic Rankine Cycles (ORCs), Renewable Energy, Vol.36, 2011, pp.659-670 https://doi.org/10.1016/j.renene.2010.07.010
  2. Dai Y, Wang J, Gao L, Parametric optimization and comparative study of organic Rankine cycle (ORC) for low grade waste heat recovery, Energy Convs. Mgmt., Vol.50, 2009, pp.576-582. https://doi.org/10.1016/j.enconman.2008.10.018
  3. Hung T.C, Wang S.K, Kuo C.H, Pei B.S, Tsai K.F, A study of organic working fluids on system efficiency of an ORC using low-grade energy sources, Energy, Vol.35, 2010, pp.1403-1411 https://doi.org/10.1016/j.energy.2009.11.025
  4. Delgado-Torres A.M, Garcia-Rodriguez, Analysis and optimization of the lowtemperature solar organic Rankine cycle (ORC), Energy Convs. Mgmt, Vol.51, 2010, pp.2846-2856. https://doi.org/10.1016/j.enconman.2010.06.022
  5. Heberle F,Brueggemann D,Exergy based fluid selection for a geothermal organic Rankine cycle for combined heat and power generation, Applied Thermal Eng., Vol.30, 2010, pp.1326-1332. https://doi.org/10.1016/j.applthermaleng.2010.02.012
  6. Jing L,Gang P,Jie J,Optimization of low temperature solar thermal electric generation with organic Rankine cyclein different areas, Applied Energy, Vol.87, 2010, pp. 3355-3365 https://doi.org/10.1016/j.apenergy.2010.05.013
  7. Lai N.A, Wendland M, Fisher J, Working fluids for high temperature organic Rankine cycle, Energy, Vol.36, 2011, pp.199-211 https://doi.org/10.1016/j.energy.2010.10.051
  8. Tchanche B.F, Papadakis G, Frangoudakis A, Fluidselection for a low-temperature solar organic Rankine cycle, Applied Thermal Eng., Vol.29, 2009, pp.2468-2476. https://doi.org/10.1016/j.applthermaleng.2008.12.025
  9. 김경훈, 작동유체에 따른 유기랭킨사이클 (ORC)의 열역학적 성능에 관한 연구,수소및신에너지학회논문집, Vol.22, 2011, pp. 223-231.
  10. Gao J, LiL. D, Zhu Z.Y, Ru S.G, Vapor liquid equilibria calculation for a symmetric systemsusing Patel-Tejaequation of state with a new mixingrule, Fluid Phase Equilibria, Vol.224, 2004, pp.213-219 https://doi.org/10.1016/j.fluid.2004.05.007
  11. Yaws C.L, Chemical properties handbook, McGraw-Hill, 1999
  12. Cengel Y.A, Boles M.A,Thermo-dynamics, an engineering approach, 7th., McGraw-Hill, 2008

Cited by

  1. A Heat Exchanging Characteristics of Organic Rankine Cycle for Waste Heat Recovery of Coal Fired Power Plant vol.26, pp.1, 2015, https://doi.org/10.7316/KHNES.2015.26.1.064
  2. 200kW Turbine Development for Organic Rankine Cycle System vol.1, pp.1, 2013, https://doi.org/10.3795/KSME-C.2013.1.1.107