초록
주름구조를 가지는 박판구조물은 비행기, 자동차, 전자제품 등의 다양한 용도의 열교환기로 사용된다. 이러한 주름구조를 가지는 박판구조물의 경우 대량생산을 위하여 박판소성가공 공정으로 제작하게 되는데 꺾임 각을 가지는 주름구조를 형성하는 것은 매우 어렵다. 이 문제를 해결하기 위해 본 연구에서는 정확한 주름구조를 형성하기 위하여 일정한 압력을 박판의 전면에 효과적으로 미칠 수 있도록 새로운 고무성형공정을 제안한다. 본 연구에서 제안한 공정을 검증하기 위하여 우선 유한요소해석을 통해 고무성형공정 변수를 최적화하였다. 그리고 최적화한 고무성형공정을 이용하여 꺾임구조와 미세주름 구조를 가지는 박판을 제작함으로써 본 연구에서 제안한 공정이 목표로 하는 박판의 성형에 효과적인 공정임을 검증하였다.
Thin sheets with a corrugated structure are generally used for the fabrication of heat exchangers for electronics, airplanes, and vehicles. However, it is difficult to fabricate corrugated structures, especially those with a bent angle, using the conventional stamping process because of its intrinsic formation mechanism. We propose a novel rubber-forming process for the effective pressing of the both tilted sides of a plate under the same pressure to form exact corrugated shapes. We use finite element analysis and experiments to study the rubber-forming process parameters, and we evaluate the maximum allowable bent angle for high-quality formation. We show that the proposed method is effective for the fabrication of bent plates with low cost.