초록
스티프너로 보강된 플레이트 거더 대신에 주름 웨브를 사용하는 근본적인 장점은 얇은 판으로 형성된 편평한 웨브에서 발생하는 좌굴에 관한 불안정 문제를 해결할 수 있는 것 뿐 아니라 수직 스티프너의 필요성도 함께 해결 됨으로써 경제적인 장점을 제공받게 된다. 따라서 본 연구에서는 사인형 주름 웨브를 가진 보의 구조설계 기법과 실변수 알고리즘을 이용하여 최적화 문제를 다루도록 한다. 구조설계과정과 설계변수들은 EN 1993-1-5, DASt-R015 및 Pasternak 등(2004)을 통해서 구성하며, 주름 웨브의 전단좌굴에 대한 유효한 설계가능영역에 대해 비교, 고찰한다. 구조설계 최적화를 위해서, 목적함수는 사인형 주름 웨브 보의 중량으로 정의하여 최소중량최적화를 수행하며, 제약조건으로는 세장비, 부재력 저항능력 및 보의 허용처짐에 대해서 고려한다. 최종적으로 등분포 하중의 단순보 모델을 해석 대상으로 채택하며, 유전자 연산에 있어서 효율적인 확률변수에 대해 연구한다.
The underlying advantages of using thin-walled corrugatedwebs instead of plate girders with stiffeners are the elimination of instability problems associated with buckling of the thin-walled flat plate, and elimination of the need for transverse stiffeners, which alsoresults in economic advantages. This paper focuses on two aspects related to the structural design technique forsinusoidal corrugated web steel beams, and the optimum design of the beams using real-value genetic algorithms. The structural design process and design variables used in this optimization werecomposed with EN 1993-1-5, DASt-R015 standard and Pasternak et al. (2004), and the valid design capacity of shear buckling of the standards were compared. For the optimum structural design, the objective function, presented as the fullweight of the sinusoidal corrugated web beams, and the slenderness, member forces, and maximum deflection of the beam, were considered constraints. Finally, the simple beam under the uniform load was adopted as a numerical example, and the effective probability parameters of the genetic operators were considered to find the global minimum point.