초록
콘크리트용 앵커볼트의 설계에 $45^{\circ}$ 콘파괴 이론이 그동안 적용되어 왔으나, 2,000년 이후부터 CCD(Concrete Capacity Design) 방법이 새로운 설계법으로 도입되었다. 그러나, 본 방법은 중소형 앵커볼트에 대한 실험 결과에 근거한 관계로 앵커볼트의 직경이 50mm 이하이고 매입깊이가 635mm 이하인 경우에만 허용되고 있다. 따라서 M50 이상의 중대형 앵커볼트에 대한 합리적인 인장파괴강도식의 도출이 필요한 실정이다. 본 연구에서는 매입깊이 400~450mm의 M56 선설치 단일 앵커볼트의 콘크리트 인장파괴강도 평가를 위해 5개의 시험체에 대해 실험을 수행하였다. 그리고, 본 실험 결과와 최근의 타 실험 결과를 종합하여 매입깊이가 280~1,200mm인 중대형급 앵커볼트에 대해 현 설계기준의 인장파괴강도식의 적용성 여부를 평가하였다.
The $45^{\circ}$cone failure theory has been used for concrete anchor bolt design, but the CCD (concrete capacity design) method was adopted as a new design method in 2000. The method was allowed to be used, however, only for anchors with a diameter of less than 50 mm and an embedment depth of less than 635 mm because it is based on the experiment results from medium-sized to small anchor bolts. Therefore, it is necessary to develop a rational concrete breakout capacity equation for medium-sized to large anchor bolts. In this study, tension tests on an M56 cast-in-place single anchor bolt with an effective embedment depth of 400-450 mm were carried out for the five test specimens. Based on the test results together with the other recent test results, the applicability of the concrete breakout capacity equation in the current design code to the large to medium-sized anchor bolts with an embedment depth of 280-1,200 mm was estimated.