The Suggestion of Seismic Performance Values on Connections for Performance Based Design of Steel Structures

강구조 성능기반설계를 위한 접합부의 내진성능평가치 제안

  • 오상훈 (부산대학교 건축학부 건축공학전공) ;
  • 오영석 (대전대학교 건축공학과) ;
  • 홍순조 (우석대학교 건축.인테리어디자인학과) ;
  • 이진우 (대전대학교 건축공학과)
  • Received : 2010.11.06
  • Accepted : 2011.04.01
  • Published : 2011.04.27

Abstract

The purpose of this research was to analyze the connections of the seismic-performance values for domestic-performance-based designs. Basic research on the performance design method has been increasing of late, along with performance-based organization investigations. These investigations concern the performance level state of steel structure buildings. According to the performance limit state, seismic-performance values should be presented as appropriate steel structure engineering amounts. The first step, based on the full-scale steel structure experiments, involves researching on the making of a basic document. The moment-rotation angle relationship results of the experiment on the moment-frame connection were used to assort the functional and undamaged limits, which were assumed to be less than the yield moment. Moreover, the repairable and safety limits, which were assumed to exist between the yield and maximum moments, were assorted by investigating the accumulated plastic deformation ratio.

본 연구의 목적은 국내 강구조 성능기반설계를 위한 접합부의 내진성능평가치를 제안하는 것에 있다. 최근 성능설계에 대한 기초연구가 국내, 외에서 증가하고 있으며, 본 연구에서는 외국의 성능설계기법을 조사, 분석하여 강구조 건축물의 성능한계분류를 제안하였다. 제안된 성능한계분류에 따라 강구조에 적합한 공학량으로서 내진성능규정치를 제시할 필요가 있다. 그 첫 번째 단계로 강구조 실대형 실험을 통한 접합부의 실험결과를 중심으로 기초자료를 조사하여 작성하였다. 모멘트 골조 접합부의 실험 데이터에서 얻은 모멘트-회전각 관계를 이용하여 항복하중 이하에 존재할 것으로 판단되는 기능한계와 손상한계는 층간변형각으로 구분하였다. 또한 항복하중과 최대하중 사이에 존재할 것으로 판단되는 복구한계와 안전한계는 소성율과 누적소성변형배율을 조사하여 구분하였다.

Keywords

References

  1. 건축강구조표준접합상세(안) (2009) 한국강구조학회,pp.6-13.
  2. 김영주,오상훈,유홍식(2008) 철골모멘트접합부의 거동에 미치는 접합상세의 영향, 2008년 한국강구조학회 학술대회 논문집,한국강구조학회, pp.203-206.
  3. 오상훈(2009) KBC 2009강구조 특수모멘트 접합부 내진설계, 2009강구조 초고층건축 심포지엄.pp.73-100.
  4. 이강석(2009) 일본 지진피해를 받은 건축물의 지진피해도 구분 판정기준 및 복구기술지침, 구조물진단학회지, 제13권, 제2호,pp.52-72.
  5. 조정혁(2008) 내진용 형강을 사용한 웨브 강접 보-기둥 접합부의 성능평가, 성균관대학교 과학기술대학원 건설환경시스템공학과 건축구조전공, pp.1-4.
  6. 하중저항계수설계법에 의한 강구조설계 기준(2009) 한국강구조학회.
  7. 한국건설기술평가원(2009) 성능중심의 건설기준 정비 및 표준화 중간보고서, pp.1-44,132,133.
  8. 秋山宏(2002) 오상훈 역, 에너지 평형법에 의한 건축물의 내진설계, 구미서관.
  9. 岡田 健, 呉 相勲, 山田 哲,今枝 知子, 山口 路夫, 和田 章 (2001) 從來型の柱梁接合部をゆうする合成梁の変形能力に関する実験的研究 : 合成梁の変形能力を反映した鋼構造骨組の耐震性評価その1, 日本建築學會構造系論文集日本建築學會, No.547, pp.161-168.
  10. 岡田 健, 山田 哲, 呉 相勲 (2002) 改良型の柱梁接合部を有する合成梁の変形能力に関する実験的研究 : 合成梁の変形能力を反映した鋼構造骨組の耐振性評価 その2,日本建築學會構造系論文集,日本建築學會, pp.123-130
  11. 北村春幸, 宮内洋二, 浦本㢱樹(2006) 性能設計における耐震判断基準値に関する研究-JSCA耐震性能メニューの安全限界値と余裕度レベルの検討-,日本建築學會構造系論文集,日本建築學會, No.604,pp.183-191.
  12. 桑村 仁, 田中直樹, 杉本浩-,向野聡彦(2002)鋼構造軀體の性能表示-鋼構造建築物の性能設計に関する研究 その1-;,日本建築學會構造系論文集, 日本建築學會, No.562, pp.175-182.
  13. KBC (2009)대한건축학회.
  14. Kato, B. and Akiyama, H. (1973) Predictable Properties of Material under Incremental Cyclic Loading, IABS, Preliminary Publication Lisbon, pp.119-124.
  15. Structure Engineers Association of California (SEAOC) Vision 2000 Committee (1995) Vision 2000 - Performance Based Seismic Engineering of Buildings, Sacramento,CA.
  16. SAC Joint Venture (2000) Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, FEMA-350, Chap. 2, General Requirements, Chap.4, Performance Evaluation.
  17. SAC Joint Venture (2000) Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings, FEMA-351, Chap.3, Performance Evaluation. Chap.4 Loss Estimation.