참고문헌
- Thomas, W.M., Nicholas, E.D., Needham, J.C., Murcg, M.G., Templesmith, P. and Dawes, C.J., 1991, "Friction Stir Butt Welding", International patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8, Dec. 1991, U>S> Patent No. 5,460,317, Oct. 1995.
- 마찰압접협회, 2006, "마찰접합기술", 일간공업신문사(일서).
- 김미선, 2009, "국내 마찰(교반) 설비산업의 현황과 전망은?", 용접저널, 8월호, pp. 51-62.
- Mahoney, M.W., Rhodes, C.G., Flintoff, J.G., Spurling, R.A. and Bingel, W.H., 1997, "Properties of Friction-Stir-Welded 7075 T651 Aluminum", Metallurgical and Materials Transactions Vol. 29A, pp. 1955-1964.
- Shinoda, T. and Kondo, Y, 1997, "Friction Stir Welding of Aluminum Plate", Welding International, Vol. 11-3, pp. 179-184. https://doi.org/10.1080/09507119709451948
- Sato, Y.S., Kokawa, H., Ikeda, K., Enomoto, M., jogan, S. and Hashimoto, T., 2001, "Microtexture in Friction Stir weld of an Aluminum Alloy", Metallurgical and Materials Trans. Vol. 32A, pp. 941-948.
- Fuller, C.B., Manohney, M.W., Calabrese, M. and Micona, L, 2010, "Evolution of Microstructure and Mechanical Properties in Naturally Aged 7075 and 7075 Al Friction Stir Welds", Materials Science and Engineering A527, pp. 2233-2240.
- Hatamleh, O., Forth, S. and Reynolds, A.P., 2010, "Fatigue Crack Growth of Peened Friction Stir-Welded 7075 Aluminum Alloy Different Load Ratios", J. of Mat. Eng. Performance, Vol. 19, PP. 99-106. https://doi.org/10.1007/s11665-009-9439-1
- 이창용, 김선규, 이원배, 장응성, 연윤모, 정승부, 2004, "7075 알루미늄 합금의 마찰교반용접특성", 대한용접학회2004년도 춘계 학술대회발표논문, pp. 159-161
- 연윤모, 이원배, 정승부, 2001, "알루미늄 합금의 마찰교반용접부의 미시조직과 특성", 대한용접학회지, pp. 159-161.
- 장석기, 한민수, 전정일, 2007, "AI7075-T651의 마찰교반 용접에 대한 회전속도와 이송속도의 영향", 대한 기계학회논문집 A권, 제 31권, 제 4호, pp. 532-539.
- 김치옥, 김선진, 2010, "용접조건이 AI-7075-T651의 마찰교반용접부의 인장 특성에 미치는 영향", 한국동력기계공학회지, 제 15권 제 2호, pp. 61-68.
피인용 문헌
- A Study on the Performance Evaluation of the Welded Joint to Maintain the Quality of the Tandem GMAW vol.39, pp.3, 2015, https://doi.org/10.5916/jkosme.2015.39.3.230
- Thermal and mechanical analysis on friction stir welding of AZ31 magnesium alloy by the finite element method vol.17, pp.4, 2013, https://doi.org/10.9726/kspse.2013.17.4.064
- Statistical aspects of fatigue crack growth life of base metal, weld metal and heat affected zone in FSWed 7075-T651 aluminum alloy vol.28, pp.10, 2014, https://doi.org/10.1007/s12206-014-0906-8
- Marco and Microscopic Observations of Fatigue Crack Growth in Friction Stir Welded 7075-T651 Aluminum Alloy Plates vol.18, pp.2, 2014, https://doi.org/10.9726/kspse.2014.18.2.062
- Statistical Distribution of Fatigue Crack Growth Rate for Friction Stir Welded Joints of Al7075-T651 vol.17, pp.4, 2013, https://doi.org/10.9726/kspse.2013.17.4.086
- Effect of Specimen Orientation on Fatigue Crack Growth Behavior in Friction Stir Welded Al7075-T651 Joints vol.38, pp.12, 2014, https://doi.org/10.3795/KSME-A.2014.38.12.1317
- Friction Stir Welding of 7075-T651 Aluminum Plates and Its Fatigue Crack Growth Property vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1347
- 일정 응력확대계수범위 제어 시험하의 마찰교반용접된 7075-T651 알루미늄 합금 용접부의 피로균열전파 거동의 실험적 고찰 (LT 방향의 시험편에 대하여) vol.37, pp.6, 2011, https://doi.org/10.3795/ksme-a.2013.37.6.775