한국CDE학회논문집 (Korean Journal of Computational Design and Engineering)

  • 제16권4호
  • /
  • Pages.305-313
  • /
  • 2011
  • /
  • 2508-4003(pISSN)
  • /
  • 2508-402X(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

동작 정보를 갖는 가상설비 데이터 재활용 방법론

A Method of Reusing Kinematic Information for Virtual Facilities

  • 투고 : 2011.03.10
  • 심사 : 2011.06.23
  • 발행 : 2011.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper proposes a method for reusing kinematic design data for virtual facilities, Making a virtual model of a facility involves two major activities: geometric design (virtual model visualization) and kinematic design that should be remodeled frequently whenever design changes occur, Conventionally, a virtual model of an automated facility focuses on the design level, which mainly deals with design verification, alternative comparison, and geometric model diagnosis, Although a design level model can be designed with the information of past models from PLM system, a simulation level model is not sufficient utilized to be reused for kinematic design purpose, We propose a method for reusing kinematic information of a past simulation model to cope with this problem, We use the concept or the 'center of mass', which is a point representing the mean position of the matter in a body or system. And we also use comparison method of a boundary box to identity which 3D objects have to be involved from the design model to a link structure that is contained in the simulation model. Because a proposed method only use not a historical approach but a geometrical approach, it is more effective to apply to the field.

키워드

참고문헌

  1. Lee, S. C., Song, I. H. and Borm, J. H., "An Accurate and Efficient Method of the Splay Paint Simulation for Robot OLP", Transactions of the Society of CAD/CAM Engineers, Vol. 13, No. 4, pp. 296-304, 2008.
  2. Choi, M. W., Han, S. T., Seo, J. H., Woo, J. H., Lee, C. J. and Choi, Y. R., "Digital Manufacturing Strategy & Case study of Automotive General Assembly", Transactions of the Society of CAD/CAM Engineers, Vol. 10, No. 3, pp. 199-209, 2005.
  3. Noh, S. D. and Park, Y. J., "Material Planning Information Management for Automotive General Assembly using Digital Factory", Transactions of the Society of CAD/CAM Engineers, Vol. 9, No. 4, pp. 325-333, 2004.
  4. Ko, M. S., Koo, L. J., Kwak, J. G., Hong, S. H., Wang, G. N. and Park, S. C., "A Study of PLC Simulation for Automobile Panel AS/RS", 한국시뮬레이션 학회지, Vol. 18, No. 3, pp. 1-11, 2009.
  5. Park, S. C., Park, C. M. and Wang, G. N., "A PLC programming environment based on a virtual plant", Int. J. Adv. Manufac Technol, Vol. 39, pp. 1262-1270, 2008. https://doi.org/10.1007/s00170-007-1306-3
  6. Park, C. M., Seong, G. Y., Park, S. C., Wang, G. N. and Han, K. H., "Simulation based Control Program Verification in Automobile Industry", The International Conference on Modeling Identification and Control, Innsbruck, Austria, 2008.
  7. Kwak, J. G., Park, S. C. and Wang, G. N., "Acquisition of Large 3D Simulation Data from 3D CAD Data", 대한산업공학회 추계학술대회 논문집, 2007.
  8. Yoo, D. J., "A Study on Local Hole Filling and Smoothing of the Polygon Model", Journal of the Korean Society for Precision Engineering, Vol. 23, No. 9, pp. 190-199, 2006.
  9. Hwang, H. Y., Lee, J. Y., Yang, D. C., Kwon, T. S. and Jung, H. S., "Knowledge based Configuration Design of a Train Vehicle Body Using CATIA", 한국철도학회 추계학술대회 논문집, 2005.
  10. Ko, M. S., Kwak, J. G., Jo, H. W., Park, C. M., Wang, G. N. and Park, S. C., "A Study of Efficient Method of 3D JIG Kinematic Modeling for Automobile Process Simulation", Transactions of the Society of CAD/CAM Engineers, Vol. 14, No. 6, pp. 415-423, 2009.
  11. Ko, M. S., Kwak, J. G. and Park, S. C., "Kinematic Template Generation Methodology for 3D JIG Models", Transactions of the Society of CAD/CAM Engineers, Vol. 15, No. 3, pp. 212-221, 2010.
  12. Z. M. Bi and W. J. Zang, "Flexible Fixture design and automation: Review, Issues and Future Directions", International Journal of Production Research, Vol. 39, No. 13, pp. 2867-2894, 2001. https://doi.org/10.1080/00207540110054579
  13. Chou, Y. C., Chandru, V. and Barash, M. M., "A Mathematical Approach to Automatic Configuration of Machining Fixtures: Analysis and Synthesis", J. Eng. Ind., Vol. 111. No. 4, pp. 229-306, 1989.
  14. Kan, Y., Rong, Y. and Yang, J. A., "Geometric and Kinetic Model based Computer-aided Fixture Design Verification", Journal of Computing and Information Science in Engineering, Vol. 3, 187-199, 2003. https://doi.org/10.1115/1.1607352