Design of Transmission Gear Machining Line for Developing Countries Based on Thinking Process and Simulation Method

사고 프로세스와 시뮬레이션 기법 기반의 저임금국가에 적합한 변속기 기어가공라인의 설계

  • 박홍석 (울산대학교 기계공학부) ;
  • 박진우 (울산대학교 대학원 기계자동차공학과) ;
  • 최흥원 (울산대학교 대학원 기계자동차공학과)
  • Received : 2010.12.28
  • Accepted : 2011.02.27
  • Published : 2011.08.01

Abstract

Nowadays, automobile manufacturers are faced with increasing global competition which is required low cost as well as high quality. To reduce shipping and handling cost and delivery time, lots of automobile manufactures tried to build their new factory in the neighborhood of market. Simultaneously, many factories are under construction in developing countries to make efficient use of low-wage workers. However, because systems are installed in developing countries as the same type of domestic facilities, systems have lots of problems such as high installation cost and inefficient use of manpower. To find core problems and generate optimal solution of these problems, thinking process of TOC(Theory Of Constrains) is used. In case of transmission gear machining system, semi-auto system is proposed as the best solution to increase manpower efficiency and system utilization. Semi-auto system consists of automatic machining process and manual transporting process. The system layout is generated based on semi-auto process concept. And, 3D simulation method using QUEST is used to verify production volume of generated system.

Keywords

References

  1. 주원, 이장균, 이철선, 임상수, 잠재성장률 2% 제고를 위한 VIP Report-2011년 주요산업 전망 및 현황, 현대경제연구원, 2010.
  2. 임혜경, 황정애, 2020년 자동차 산업의 미래, 한국자동차산업연구소, 2009.
  3. Mokshagundam, L. S., Synchronous Management, Spectrum Publishing Company, 2005.
  4. Park, H. S. and Cutkosky, M. R., "Framework for Modeling Dependencies in Collaborative Engineering Processes", Research in Engineering Design, No. 11, pp. 84-102, 1999.
  5. 고현우, "6시그마 품질경영 활동에서 TOC적용방안", 한국산업경영시스템학회지, 제27권, 제1호, pp. 103-108, 2004.
  6. 박홍석, 최흥원, "디지털 제조기술 기반의 차체 사 이드패널 조립시스템 구현," 한국정밀공학회지, 제 23권, 제11호, pp. 68-77, 2006.
  7. 최무웅, 한승택, 서정훈, 우종훈, 이춘재, 최양렬, "자동차 조립 라인의 디지털 생산 구축 사례연구," 한국CAD/CAM학회논문집, 제14권, 제4호, pp. 242-253, 2009.
  8. 박홍석, 문시환, 박상길, 최흥원, 신상종, 차석근, "디지털 제조기술 지원 도어트림 조립시스템 개발," 한국CAD/CAM학회논문집, 제10권, 제3호, pp. 199-209, 2005.
  9. Gunter, W. and Emmerich, S., "Digital Planning Validation in Automotive Industry," Computers in Industry, Vol. 56, Issue 4, pp. 393-405, 2005. https://doi.org/10.1016/j.compind.2005.01.010
  10. Wolfgang, K., "Digital Factory-Intergration of Simulation Enhance the Product and Production Process toward Operative Control and Optimization," International Journal of Simulation, Vol. 7, No. 7, pp. 27-39, 2006.
  11. Quest User Manual, Delmia Corp., 2002.
  12. 한국TOC협회, www.tockorea.org.