References
- T. Jung, "Development of hybrid electric compressor motor drive system for hybrid electrical vehicles," Journal of Power Electronics, Vol. 9, No. 6, pp. 960-968, Nov. 2009.
- C. C. Chan, A. Bouscayrol, and K. Chen, "Electric, hybrid, and fuel-cell vehicles: Architectures and modeling," IEEE Transactions on Vehicular Technology, Vol. 59, No. 2, pp. 589-598, Feb. 2010. https://doi.org/10.1109/TVT.2009.2033605
- C. C. Chan, "The state of the art of electric, hybrid, and fuel cell vehicles," in Proc. the IEEE, Vol. 95, No. 4, pp. 704-718, 2007. https://doi.org/10.1109/JPROC.2007.892489
- B. Singh, P. Jain, A. P. Mittal, and J. R. P. Gupta, "Torque ripples minimization of DTC IPMSM drive for the EV propulsion system using a neural network," Journal of Power Electronics, Vol. 8, No. 1, pp. 23-34, Jan. 2008.
- E. Levi, "Multiphase electric machines for variable-speed applications," IEEE Trans. Ind. Electron., Vol. 55, No. 5, pp. 1893-1909, May 2008. https://doi.org/10.1109/TIE.2008.918488
- E. Levi, R. Bojoi, F. Profumo, H. A. Toliyat, and S. Williamson, "Multiphase induction motor drives - A technology status review," IET Electric Power Applications, Vol. 1, No .4, pp. 489-516, Jul. 2007. https://doi.org/10.1049/iet-epa:20060342
- B. C. Mecrow, A. G. Jack, D. J. Atkinson, S. R. Green, G. J. Atkinson, A. King, and B. Green, "Design and testing of a four-phase faulttolerant permanent-magnet machine for an engine fuel pump," IEEE Trans. Energy Convers., Vol. 19, No. 4, pp. 671-678, Dec. 2004. https://doi.org/10.1109/TEC.2004.832074
- J. Riveros, B. Bogado, J. Prieto, F. Barrero, S. Toral, and M. Jones, "Multiphase machines in propulsion drives of electric vehicles," in Proc. Power Electronics and Motion Control Conference (EPE/PEMC), pp. T5-T201, 2010.
- M. T. Abolhassani and H. A. Toliyat, "Fault tolerant permanent magnet motor drives for electric vehicles," in Proc. IEEE International Electric Machines and Drives Conference, pp. 1146-1152, 2009.
- L. Parsa and H. A. Toliyat, "Fault-tolerant interior-permanent-magnet machines for hybrid electric vehicle applications," IEEE Trans.s Veh. Technol., Vol. 56, No. 4, pp. 1546-1552, Jul. 2007. https://doi.org/10.1109/TVT.2007.896978
- M. G. Simoes and P. Vieira Jr, "A high-torque low-speed multiphase brushless machine - A perspective application for electric vehicles," IEEE Trans. on Ind. Electron., Vol. 49, No. 5, pp. 1154-1164, Oct. 2002. https://doi.org/10.1109/TIE.2002.803241
- J. Jatskevich and M. Maksimcev, "Dynamic modelling of multiphase induction motors for electric ship propulsion system transient and survivability studies," WSEAS Transactions on Circuits and Systems, Vol. 4, No. 12, pp. 1873-1882, Dec. 2005.
- L. Parsa and H. A. Toliyat, "Five-phase permanent magnet motor drives for ship propulsion applications," in Proc. 1st IEEE Electric Ship Technologies Symposium, pp. 371-378, 2005.
- Z. Sun, J. Wang, G. W. Jewell, and D. Howe, "Enhanced optimal torque control of fault-tolerant PM machine under flux-weakening operation," IEEE Trans. Ind. Electron., Vol. 57, No. 1, pp. 344-353, Jan. 2010. https://doi.org/10.1109/TIE.2009.2029517
- N. Bianchi, S. Bolognani, and M. D. Pre, "Impact of stator winding of a five-phase permanent-magnet motor on postfault operations," IEEE Trans. Ind. Electron., Vol. 55, No. 5, pp. 1978-1987, May 2008. https://doi.org/10.1109/TIE.2008.920645
- H. M. Ryu, J. W. Kim, and S. K. Sul, "Synchronous frame current control of multi-phase synchronous motor-part ii. asymmetric fault condition due to open phases," in Proc. Conference Record of the IEEE Industry Applications Conference, pp. 268-275, 2004.
- M. Jones, S. N. Vukosavic, and E. Levi, "Parallel-connected multiphase multidrive systems with single inverter supply," IEEE Trans. Ind. Electron., Vol. 56, No. 6, pp. 2047-2057, Jun. 2009. https://doi.org/10.1109/TIE.2009.2017219
- M. R. Khan and A. Iqbal, "Extended Kalman filter based speeds estimation of series-connected five-phase two-motor drive system," Simulation Modelling Practice and Theory, Vol. 17, No. 7, pp. 1346-1360, 2009. https://doi.org/10.1016/j.simpat.2009.05.007
- C. C. Scharlau, L. F. A. Pereira, L. A. Pereira, and S. Haffner, "Performance of a five-phase induction machine with optimized air gap field under open loop v/f control," IEEE Trans. on Energy Conversion, Vol. 23, No. 4, pp. 1046-1056, Dec. 2008. https://doi.org/10.1109/TEC.2008.2001437
- L. Zheng, J. E. Fletcher, B. W. Williams, and X. He, "Dual-plane vector control of a five-phase induction machine for an improved flux pattern," IEEE Trans. Ind. Electron., Vol. 55, No. 5, pp. 1996-2005, May 2008. https://doi.org/10.1109/TIE.2008.918464
- M. J. Duran, F. Salas, and M. R. Arahal, "Bifurcation analysis of fivephase induction motor drives with third harmonic injection," IEEE Trans. Ind. Electron., Vol. 55, No. 5, pp. 2006-2014, May 2008. https://doi.org/10.1109/TIE.2008.918470
- H. M. Ryu, J. W. Kim, and S. K. Sul, "Synchronous frame current control of multi-phase synchronous motor part I. modeling and current control based on multiple D-Q spaces concept under balanced condition," in Proc. Conference Record of the IEEE Industry Applications Conference, pp. 56-63, 2004.
- B. Singh and S. Singh, "State of the art on permanent magnet brushless DC motor drives," Journal of Power Electronics, Vol. 9, No. 1, pp. 1-17, Jan. 2009.
- L. Parsa and H. A. Toliyat, "Five-phase permanent-magnet motor drives," IEEE Transactions on Industry Applications, Vol.41, No.1, pp. 30-37, 2005. https://doi.org/10.1109/TIA.2004.841021
- M. Naouar, E. Monmasson, A. A. Naassani, I. Slama-Belkhodja, and N. Patin, "FPGA-based current controllers for AC machine drives - A review," IEEE Trans. Ind. Electron., Vol. 54, No. 4, pp. 1907-1925, Aug. 2007. https://doi.org/10.1109/TIE.2007.898302
- E. Monmasson and M. N. Cirstea, "FPGA design methodology for industrial control systems - A review," IEEE Trans. Ind. Electron., Vol. 54, No. 4, pp. 1824-1842, Aug. 2007. https://doi.org/10.1109/TIE.2007.898281
- R. Arulmozhiyal and K. Baskaran, "Implementation of a fuzzy PI controller for speed control of induction motors using FPGA," Journal of Power Electronics, Vol. 10, No. 1, pp. 65-71, Jan. 2010. https://doi.org/10.6113/JPE.2010.10.1.065
Cited by
- Torque Improvement of Five-Phase Surface-Mounted Permanent Magnet Machine Using Third-Order Harmonic vol.29, pp.3, 2014, https://doi.org/10.1109/TEC.2014.2326521
- A Dead Time Compensation Algorithm of Independent Multi-Phase PMSM with Three-Dimensional Space Vector Control vol.13, pp.1, 2013, https://doi.org/10.6113/JPE.2013.13.1.77
- Torque Improvement of Dual Three-Phase Permanent-Magnet Machine With Third-Harmonic Current Injection vol.62, pp.11, 2015, https://doi.org/10.1109/TIE.2015.2442519
- Applicability of Fractional Slot Axial Flux Permanent Magnet Synchronous Machines in the Field Weakening Region vol.32, pp.1, 2017, https://doi.org/10.1109/TEC.2016.2614011
- Comparison of Optimized Control Strategies of a High-Speed Traction Machine with Five Phases and Bi-Harmonic Electromotive Force vol.9, pp.12, 2016, https://doi.org/10.3390/en9120952
- Design of Optimal Winding Configurations for Symmetrical Multiphase Concentrated-Wound Surface-Mount PMSMs to Achieve Maximum Torque Density Under Current Harmonic Injection vol.65, pp.2, 2018, https://doi.org/10.1109/TIE.2017.2745464
- Torque Improvement in Five-Phase Unequal Tooth SPM Machine by Injecting Third Harmonic Current vol.67, pp.1, 2018, https://doi.org/10.1109/TVT.2017.2771752
- Permanent magnet shaping for cogging torque and torque ripple reduction of PMSM pp.0332-1649, 2018, https://doi.org/10.1108/COMPEL-11-2017-0482
- Effects of Harmonics Into Magnet Shape and Current of Dual Three-Phase Permanent Magnet Machine on Output Torque Capability vol.65, pp.11, 2018, https://doi.org/10.1109/TIE.2018.2809463