DOI QR코드

DOI QR Code

A Study on Normal Penetration Characteristics of Small Projectiles in Concrete Targets

소형 관통자의 콘크리트 표적 수직충돌 침투특성 연구

  • 김용석 (국방과학연구소 4기술연구본부 탄두신관부) ;
  • 여환곤 (국방과학연구소 4기술연구본부 탄두신관부)
  • Received : 2011.01.10
  • Accepted : 2011.03.25
  • Published : 2011.04.05

Abstract

After investigating the analytic model to predict penetration depth, we propose an analytical model which can be used in estimating the normal penetration characteristics of small projectiles, when they are impacted to the concrete targets with ordnance velocities. The major parameters of this model are nose factor of penetrator, compressive strength and density of targets, and impact velocity. We can predict accelerations, velocities, displacements of projectiles and applied forces by this proposed model. Estimated penetration depths were shown 5% error. We also verified the usefulness of the new method with laboratory impact test data.

Keywords

References

  1. R. P. Kennedy, "A Review of Procedures for the Analysis and Design of Concrete Structures to Resist Missile Impact Effects", Nulc. Eng. Des., Vol. 37, pp. 183-203, 1976. https://doi.org/10.1016/0029-5493(76)90015-7
  2. G. E. Sliter, "Assessment of Empirical Concrete Impact Formulas", ASCE J. Struct. Div., Vol. 106, pp. 1023-1045, 1980.
  3. M. J. Forrestal, B. S. Altman, J. D. Cargile, and S. J. Hanchak, "An Empirical Equation for Penetration Depth of Ogive-nose Projectiles into Concrete Targets", Int. J. Impact Eng., Vol. 15, pp. 395-405, 1994. https://doi.org/10.1016/0734-743X(94)80024-4
  4. M. J. Forrestal, D. J. Frew, S. J. Hanchak, and N. S. Brar, "Penetration of Grout and Concrete Targets with Ogive-nose Steel Projectiles", Int. J. Impact Eng., Vol. 18, pp. 465-476, 1996. https://doi.org/10.1016/0734-743X(95)00048-F
  5. D. J. Frew, S. J. Hanchak, M. L. Green, and M. J. Forrestal, "Penetration of Concrete Targets with Ogive-nose Steel Rods", Int. J. Impact Eng., Vol. 21, pp. 489-497, 1998. https://doi.org/10.1016/S0734-743X(98)00008-6
  6. C. W. Young, "Penetration Equations", SAND97-2426, 1997.
  7. S. E. Jones, W. K. Rule, D. M. Jerome, and R. T. Klug, "On the Optimal Nose Geometry for a Rigid Penetrator", Comput. Mech., Vol. 22, pp. 413-427, 1998. https://doi.org/10.1007/s004660050373
  8. M. J. Forrestal, D. J. Frew, H. P. Hickerson, and T. A. Rohwer, "Penetration of Concrete Targets with Deceleration-time Measurements", Int. J. Impact Eng., Vol. 28, pp. 479-497, 2003. https://doi.org/10.1016/S0734-743X(02)00108-2