DOI QR코드

DOI QR Code

DLP용 유체동압베어링 스핀들모터

Fluid Dynamic Bearing Spindle Motors for DLP

  • 투고 : 2011.05.02
  • 심사 : 2011.05.16
  • 발행 : 2011.06.01

초록

The small precision spindle motors in the high value-added products including the visible home appliances such as DLP projector require not only the energy conversion devices but also high efficiency, low vibration and sound operation. However, the spindle motors using the conventional ball bearing and sintered porous metal bearing have following problems, respectively: the vibration by the irregularity of balls and the short motor life cycle by the ball's abrasion and higher sound noises by dry contact between shaft and sleeve. In this paper, it is proposed that the spindle motor with a fluid dynamic bearing is suitable for the motor to drive the color wheel of the DLP(digital lightening processor) in the visible home appliances. The proposed spindle motor is composed of the fluid dynamic bearing with both the radial force and the thrust force. The fluid dynamic bearing is solved by the finite element analysis of the mechanical field with the Reynolds equations. The magnetic part of spindle motor, which is a type of Brushless DC Motor, is designed by the electro-magnetic field analysis coupled with the Maxwell equation. And the load capacity and the friction loss of fluid dynamic bearing are analyzed to bearing clearance variation by the fabrication error in designed motor. The design of the proposed motor is implemented by the load torque caused by the eccentricity and the unbalance of the fluid dynamic bearing when the motors are fabricated in error. The prototype of the motor with the fluid dynamic bearing is manufactured, and experiment results show the vibration, sound, and phase current at no load and color wheel load of the motors in comparison. The high performance characteristics with the low vibration, the low acoustic noise and the optimal mechanical structure are verified by the experimental results.

키워드

참고문헌

  1. 이 은웅, 김 일중, "소형 정밀 전동기의 기술 동향과 해석 기법," 대한전기학회지, 제45권 2호, pp.11-16, 1996.
  2. 이 은웅, 김 일중, 김 종겸, "전동력 응용 기술의 현재와 미래," Proceeding of KIEE, Vol.45, No.12, pp.28-32, 1996.
  3. G. H. Jang, D . K. Kim and J . E. Oh, "New Frequency Domain Method on Non-repeatable Runout in a HDD Spindle Motor," IEEE Trans on Magn., Vol.32, NO.2, pp.833-838, 1999.
  4. Sang-Moon Hwang, Kyung-Tae Kim, Weui-Bong Jeong, Young-Ho Jung and Beom-Soo Kang, "Comparison of Vibration Sources between Asymetric HDD Spindle Motors with Rotor Eccentricity," IEEE Trans. on Ind. App., Vol.37, No.6, pp.1727-1731, Dec. 2001. https://doi.org/10.1109/28.968184
  5. Ron W. Wonlley, "Air Bearings-Are They the Future for the Hard Disk Drive Spindle Motors?," Data Tech, pp.49-52, 2002.
  6. J. X. Shen, K. J. Tseng, D. M. Vilathgamuwa and W.K.Chen, "A Novel Compact PMSM with Magnetic Bearing Artifical Heart Applications," IEEE Trans. on Ind. App., Vol.36, No.4, July 2000.
  7. 十合普, "氣體軸受-設計から製作まで", 共立出版株式會社 昭和59年
  8. L. Nagarathnam, D. Jennings and H. Leuthold, "System Level Dynamics Performance and Testing of Conventional Ball Bearing and Hydrodynamic Bearing Spindle Motors in Hard Disk Drives," ASME AIPSP, Vol.2, pp.85, 1996.
  9. Bootsma, J., "Liquid-Lubricated Spiral Grooved Bearing," Thesis, Technological University Delft, The Netherland, 1975.
  10. J. F. Booker and K. H. Huebner, "Application of Finite Element Method Lubrication : An Engineering, Approach," Trans. ASME Journal of Lub. Tech., Vol.94, pp.313, 1972. https://doi.org/10.1115/1.3451719
  11. P. K. Goenka, "Dynamically Loaded Jounal Beraing : Finite Element Method Analysis," Trans ASME Journal of Tribology, Vol. 106, pp.429, 1984. https://doi.org/10.1115/1.3260954
  12. G. H. Jang, J. W. Yoon, et al., "Torque and Unbalanced Magnetic Force in Rotational Asymetric Brushless DC Motor," IEEE Trans on Magn., Vol.32, No.5, pp.5157-5159, 1996. https://doi.org/10.1109/20.539522
  13. 中田高義 外, 有限要素法交流電磁石 設計 應用, 森北出判株式會社, 1991.
  14. J.R. Hendershot Jr and TJE Miller,"Design of Brushless Permanent Magent Motors", Magna Physics Publishing and Clarendon Press, Oxford, 1994.
  15. M. Marinescu and N. Marinescu, "Numerical Computation of Torques in Permanent Magnet Motors by Maxwell Stress and Energy Method", IEEE Trans. on Magnetics, Vol. 24, No.1, pp.463-466, 1988. https://doi.org/10.1109/20.43957